@article { author = {NouriEmamzadehee, Mohammadreza and Bakhshi, Vahid and Tabatabaee, SeyedHassan}, title = {Effects of Variable Longitudinal Slope on Application Efficiency and Uniformity of Water Distribution in Furrow Irrigation System}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {1-9}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {Among surface irrigation methods, furrow irrigation is most common and adaptable method. Longitudinal slope in furrow irrigation is generally uniform and constant along the furrow. In order to access more application efficiency and more uniformity of water distribution and control runoff and deep percolation in furrow irrigation, several techniques such as surge irrigation and cut-back irrigation is used that all is need applying special equipment during operation. This study was conducted to investigate the effects changing of longitudinal slope furrow from linear to planar (concave or convex) on the parameters of the furrow irrigation. In this way an experiment with completely randomized design with three replications was taken place in the experimental field of Shahrekord University during the summer 2010. The treatments were furrows with uniform, concave and convex longitudinal slope. Indexes such as time advance, time recession and outflow was measured. Coefficients of infiltration equation were calculated by two-point method of Elliott – Walker. The indexes such as application efficiency and uniformity of water distribution in all treatments were calculated and compared statistically by SAS software. The results of this study shows application efficiency and uniformity of water distribution in the concave slope treatment was 73 and 92 percent, respectively. Corresponding values of control treatment (70 and 90 percent) were significantly different and so on that of convex slope treatment with quantity of 63 and 86 percent, respectively. Therefore it can be concluded that in furrow irrigation the assessment indexes and productivity are improved by applying the longitudinal concave slope.  }, keywords = {Keywords: Furrow irrigation,slope,Water application efficiency,Uniformity of water distribution}, title_fa = {تأثیر شیب طولی متغیر بر راندمان کاربرد و یکنواختی توزیع آب در سیستم آبیاری جویچه‌ای}, abstract_fa = {     از میان روش‌های آبیاری سطحی، آبیاری جویچه‌ای متداول‌ترین و سازگارترین روش برای توسعه کشاورزی مکانیزه محسوب می‌شود. در این روش آبیاری عموماً شیب طولی جویچه‌ها یکنواخت و ثابت است و برای افزایش راندمان کاربرد و یکنواختی توزیع آب و کاهش رواناب و نفوذ عمقی روش‌هایی همچون آبیاری موجی و کاهش دبی به کار می‌رود که همگی نیازمند به کاربردن تجهیزات خاص در دوره بهره‌برداری است. این تحقیق با هدف بررسی تأثیر تغییر شیب طولی جویچه از حالت خطی به حالت منحنی (مقعر یا محدب) روی پارامتر‌های ارزیابی آبیاری جویچه‌ای انجام شده است. به این منظور یک طرح آزمایشی کاملاً تصادفی با تیمارهای شیب مقعر، محدب با سه تکرار در مزرعه آزمایشی دانشگاه شهرکرد طی تابستان 1389 انجام گرفت. شاخص‌های زمان پیشروی، پسروی و دبی خروجی اندازه‌گیری شده و پارامترهای ثابت معادله نفوذ به روش دو نقطه‌ای الیوت-واکر با توجه به داده‌های میانگین تیمار شاهد و شاخص‌های ارزیابی مانند راندمان کاربرد آب، یکنواختی توزیع آب در تیمارها محاسبه شد و نتایج به وسیله نرم افزار SAS مورد مقایسه آماری قرار گرفت. بر این اساس راندمان کاربرد و یکنواختی توزیع آب در تیمار شیب مقعر به ترتیب با مقادیر 73 و 92 درصد به شکل معنی‌دار متفاوت از مقادیر متناظر برای تیمار شاهد (70 و 90 درصد) و تیمار شیب محدب (63 و 86 درصد) اندازه‌گیری شد. لذا می‌توان گفت ایجاد شیب مقعر طولی در شیارهای آبیاری می‌تواند شاخص‌های ارزیابی و در نتیجه بهره‌وری را تقویت کند.    }, keywords_fa = {کلید واژه‌ها: آبیاری جویچه‌ای,شیب,راندمان کاربرد آب,یکنواختی توزیع}, url = {https://jise.scu.ac.ir/article_11050.html}, eprint = {https://jise.scu.ac.ir/article_11050_5a1ee916812f932a9847900148acbfd0.pdf} } @article { author = {yazdani, vahid and Ebrahimi, Hossein}, title = {Comparison of Estimation of Landscape Plant Coefficient Using SEBAL and LIMP Methods (Case Study: Mashhad city)}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {11-27}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {          The estimated evapotranspiration of landscape with crop coefficient values should be set up relating with shadow, density modification and regulation of certain plant species which are estimated. Nowadays, according to three coefficients surplus are compared by evapotranspiration landscape plants, it is the problem to accurate calculation crop evapotranspiration of these parameters which are so high, and need high accuracy and will be demanded the using of proper methods. However one of the newest methods of estimating evapotranspiration is using large-scale satellite images which is in this research we would tried to use the satellite images by Sebal models and synoptic stations Mashhad in evapotranspiration rate of landscape (Mashhad Mellat Park). This parameter is with Kimberly Penman (1972), FAO Penman Mantis 56, radiation (FAO 24), Blani Criddle modified, Hargrive Samani, Prystly Taylor, Makking (1957), Turc, and the 24th FAO Penman 1948 Penman method compared with Sebal methods. The values of landscape coefficient obtained in this research have a close relationship with vegetation index and increased together the value of evapotranspiration calculated by Sebal method in warm months is more than calculated in other methods. This research is showed that by using coefficient obtained in Sebal model have showed the better results than Limp model. The Results show that differences between the values of reference evapotranspiration calculated by above methods with Lysimeter data of Ferdowsi University in May. Therefore the results given by the linear regression equation of Laysymetr were closed. Landscape coefficient obtained in this study, is closed relationship with vegetation index and increasing together. Sebal evapotranspiration values method is gram per month type and more than the values calculated by other relationships. This study showed that the using of this model coefficient obtained is better results in Sebal coefficient and better than limp model. These results show that Hargrive, Samani, Blani Criddle and Tork models are less accuracy and against them Prystly and Taylor, radiation and FAO 56 Penman Mantis and FAO are better than other methods and are close to Sebal model data. Therefore, to calculate the evapotranspiration Mashhad landscape or regions with similar climates could be used three methods to set Prystly Taylor, radiation and FAO 56, Penman Mantis models accompany with landscape coefficients which presented in this study.}, keywords = {Landscape Coefficient,Sebal,Evapotranspiration,Mashhad Mellat Park}, title_fa = {مقایسه برآورد ضریب گیاهی فضای سبز به کمک روش سبال و روش لیمپ (مطالعه موردی مشهد)}, abstract_fa = {در خصوص برآورد تبخیر و تعرق فضای سبز علاوه بر ضریب گیاهی می­بایست ضرایب مربوط به سایه اندازی، تعدیل تراکم بوته و تنظیم گونه گیاهی خاص نیز برآورد شوند. حال با توجه به محاسبه سه ضریب اضافی برای تبخیر و تعرق فضای سبز نسبت به تبخیر و تعرق گیاهان زراعی مشکل محاسبه دقیق این پارامترها دوچندان شده، و دقت زیاد و استفاده از روش­های مناسب را طلب می­کند. یکی از روش­های جدید برآورد تبخیر و تعرق در مقیاس وسیع، استفاده از تصاویر ماهواره­ای می­باشد. در این پژوهش سعی ما بر این است که با استفاده از عکس­های ماهواره­ای توسط مدل سبال و اطلاعات ایستگاه سینوپتیک مشهد، میزان تبخیر و تعرق فضای سبز (پارک ملت مشهد) توسط روش­های کیمبرلی پنمن، فائو پنمن مونتیث 56، تشعشعی (فائو24)، بلانی کریدل، هارگریوز سامانی، پریستلی تیلور، مکینگ(1957)، تورک، پنمن فائو 24 و پنمن 1948 را محاسبه نموده و با روش سبال مقایسه گردد. مقادیر ضریب فضای سبز به دست آمده در این تحقیق رابطه مستقیم و تنگاتنگی با شاخص پوشش گیاهی داشته و با افزایش آن افزایش می­یابد. مقدار تبخیر و تعرق روش سبال در ماه­های گرم بیشتر از مقدار محاسبه شده توسط سایر روابط بوده است. بررسی­ها نشان داد که استفاده از ضریب به دست آمده از مدل سبال نتایج بهتری از ضریب محاسبه شده توسط مدل لیمپ را ارائه می­دهد. نتایج نشان داد که روش­های هارگریوز سامانی، بلانی کریدل و تورک از دقت کمتری نسبت به سایر روش­ها برخوردار هستند در مقابل دقت روش­های پریستلی تیلور، تشعشعی و پنمن مونتیث فائو 56 نسبت به سایر روش­ها بهتر بوده و به داده­های مدل سبال نزدیک تر هستند. لذا برای محاسبه تبخیر و تعرق فضای سبز مشهد و یا مناطق با آب و هوای مشابه می­توان از سه روش پریستلی تیلور، تشعشعی و پنمن مونتیث فائو 56 به همراه ضرایب فضای سبز ارائه شده در این تحقیق استفاده نمود.}, keywords_fa = {ضریب فضای سبز,سبال,تبخیر و تعرق,پارک ملت مشهد}, url = {https://jise.scu.ac.ir/article_11051.html}, eprint = {https://jise.scu.ac.ir/article_11051_f2e648deb580ae2714e1c5f5f53ba06b.pdf} } @article { author = {salari, meysam and Akhond Ali, Ali Mohammad and Adib, Arash and Dneshkhah, Ali Reza}, title = {Bivariate Flood Frequency Analysis Using the Copula Functions}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {29-38}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     In the conventional methods of flood frequency analysis, the flood peak variable is just considered and assumed that this variable follows some specific parametric distribution function. This assumption would restrict us and lead us to the limited available information to evaluate the flood risk. It is well known that a flood event has three variables of flood peak, volume and duration which are random in nature and are mutually dependent. In this research, the concept of the Copula function is briefly introduced and then used to modeling the dependency structure of the flood variables of the Karun River at the Ahvaz hydrometric stationand then estimate their joint probability distribution. We use three well-known and appropriate copulas, including Ali–Mikhail–Haq, Cook–Johnson and Gumbel–Hougaard which belong to the Archimedean class of copulas, to modeling the joint probability distribution of the flood variables, where the marginal distributions of the flood’s variables are selected from the parametric and non-parametric distributions. The Gumbel–Hougaard family led to better modeling of different combination of flood’s variables based on goodness of fit criteria. The selected copula is used to estimate conditional cumulative distribution function and joint return periods which lead to better estimation of flood risk.}, keywords = {Copula functions,marginal distribution,Joint probability distribution,Joint return period,Conditional cumulative distribution function}, title_fa = {تحلیل فراوانی سیلاب دو متغیره با استفاده از توابع مفصل}, abstract_fa = {     در روش‌های مرسوم تحلیل فراوانی سیلاب تنها متغیر دبی اوج سیلاب مد نظر قرار می‌گیرد و فرض می‌شود که متغیر مورد بررسی از توابع توزیع پارامتری خاصی تبعیت می‌کند. این فرضیه‌ها محدود کننده هستند و منجر به دستیابی به اطلاعات محدود در زمینه ریسک سیلاب می‌شوند. یک رویداد سیلاب دارای سه متغیر دبی اوج، حجم و تداوم سیلاب می‌باشد بطوری که این متغیرها در طبیعت تصادفی بوده و بین دو متغیر همبستگی وجود دارد. در این تحقیق از توابع مفصل برای مدل بندی ساختار همبستگی و همچنین برآورد توزیع احتمال توام متغیرهای سیلاب در ایستگاه هیدرومتری اهواز بر روی رودخانه کارون استفاده گردید. با در نظر گرفتن توابع توزیع حاشیه­ای سیلاب از خانواده های توزیع‌های پارامتری و ناپارامتری، سه مفصل مناسب از کلاس ارشمیدسی، یعنی خانواده های کوک-جانسون، علی-میکائیل-حق و گامبل-هوگارد برای مدل سازی ریاضی دو متغیره سیلاب استفاده شد. بر اساس معیارهای نکویی برازش مفصل خانواده گامبل-هوگارد منجر به بهترین نتیجه در مدل سازی ترکیب‌های مختلف متغیرهای سیلاب شد. با استفاده از مفصل منتخب توابع توزیع تجمعی شرطی و نیز دوره های بازگشت توام متغیرهای سیلاب برآورد گردید که موجب بهبود در برآورد ریسک سیلاب گردید.  }, keywords_fa = {توابع مفصل,توزیع حاشیه ای,توزیع احتمال توام,دوره بازگشت توام,تابع توزیع تجمعی شرطی}, url = {https://jise.scu.ac.ir/article_11055.html}, eprint = {https://jise.scu.ac.ir/article_11055_a5be3c6bd0912434348d3f62549dd775.pdf} } @article { author = {Kardan, Nazila and Hakim zadeh, Habib and Hassan zadeh, Yousef}, title = {3DNumerical Simulation of Hydrodynamic Parameters around the Bridge Piers Using Various Turbulence Models}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {39-54}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     In present study, the near-wake flow around the bridge piers of a circular section has been numerically analyzed. Numerical simulation was carried out using Fluent, and the numerical results were verified by the different researchers' experimental and numerical data. In order to consider the accuracy of numerical results, the flow pattern around the pier, the Strouhal number and the drag coefficient, obtained with Fluent, have been compared with available numerical and experimental data. Also, three turbulent models,        k-ε    , RSM, and LES, were used to apply the flow turbulence effects and the hydrodynamic parameters, the near-wake flow, the flow separation angle, shedding of the vortices at downstream of the cylindrical piers, and the distribution of the bed shear stress around the pier, have been investigated for three turbulent models. The numerical results show that RSM turbulent model is an accurate model for simulating and modeling the turbulence effects of these kinds of the flows.}, keywords = {Bridge piers,Numerical simulation,Turbulence model,Vortices shedding,Shear Stress}, title_fa = {شبیه‌سازی عددی سه بعدی پارامترهای هیدرودینامیکی اطراف پایه استوانه‌ای با استفاده از مدل‌های آشفتگی مختلف}, abstract_fa = {     در پژوهش حاضر جریان در ناحیه دنباله پایه­های پل با مقطع دایره­ای به صورت عددی تحلیل گردیده است. برای شبیه سازی عددی از نرم افزار فلوئنت استفاده و نتایج به دست آمده با نتایج تجربی و عددی سایر پژوهشگران صحت­سنجی شد. برای بررسی درستی نتایج عددی خطوط جریان پیرامون پایه، عدد استروهال و ضریب دراگ به دست آمده با مقادیر تجربی و عددی موجود مقایسه گردیدند. برای اعمال اثر آشفتگی جریان، سه مدل ویسکوزیته گردابی، تنش رینولدز و مدل شبیه­سازی گردابه­های بزرگ استفاده و منحنی سرعت جریان قبل از پایه، ناحیه دنباله جریان، زاویه جدایش جریان، نحوه انتشار و استهلاک گردابه­ها در ناحیه پایین دست پایه­های استوانه­ای و نیز توزیع تنش­های برشی بحرانی پیرامون پایه برای سه مدل فوق بررسی گردید. بررسی نتایج عددی نشان داد مدل تنش رینولدز در شبیه­سازی و مدل نمودن آشفتگی­های جریان از دقت بالایی برخوردار است.}, keywords_fa = {پایه پل,شبیه‌سازی عددی,مدل‌ آشفتگی,گردابه‌های برخاستی,تنش برشی}, url = {https://jise.scu.ac.ir/article_11056.html}, eprint = {https://jise.scu.ac.ir/article_11056_83cba5c029d0a1bd0e16e7162b415cae.pdf} } @article { author = {Taebi, Hamid and FathiMoghadam, Manoochehr}, title = {Investigation of Transient Flow in Branching Pipes}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {55-62}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     Any change in the pipe discharge, caused by valve closure or shutting off the pump, results in fluctuations in velocity and pressure of the flow; which develops transient flow in the water conveyance system. This flow causes various risks by creating rapid and short waves. A model composed of a reservoir, a polyethylene pipe and check valve was made to examine hydraulic transient flow in branched pipe lines. The model was made in the laboratory of hydraulic and physical models of water science faculty in Shahid Chamran university. The experiment were done on different length and diameter ration of branch to mainline in a constant discharge of 4 lit/s. the data acquired of installed pressure transducers in different points of the model were used to demonstrate how pressure wave transformed and became transient and the results are presented in the following diagrams. As maximum and minimum pressures downstream the branches decrease significantly in compare with the system without branching, some equations were proposed for estimating the maximum and minimum pressures downstream the branches.}, keywords = {Transient flow,Branching pipes,Pressure wave,water hammer}, title_fa = {بررسی هیدرولیک جریان میرا درخطوط لوله انشعابی}, abstract_fa = {     هرگونه تغییر در میزان دبی خط لوله که در اثر بسته شدن شیر یا خاموش شدن پمپ ایجاد می­گردد، باعث نوسان در میزان سرعت و فشار جریان گردیده و در نتیجه سبب وقوع جریان میرا در سیستم انتقال آب می­شود. این جریان باایجاد موج­هایسریعوزودگذرموجب خطراتگوناگونی می­شود. برای بررسی هیدرولیک جریان­های میرا در خطوط لوله دارای انشعاب، مدلی مرکب از یک مخزن، لوله­ پلی­اتیلن و شیر قطع و وصل در آزمایشگاه مدل­های فیزیکی و هیدرولیکی دانشکده مهندسی علوم آب دانشگاه شهید چمران ساخته شد. آزمایش­ها در نسبت­های مختلف طول و قطر انشعاب به خط اصلی و در دبی ثابت 4 لیتر بر ثانیه انجام گرفت. ­با استفاده از داده­های به­دست آمده از مبدل­های فشاری نصب شده در نقاط مختلف مدل­ چگونگی تغییر شکل و میرا شدن موج فشاری مورد بررسی قرار گرفت و نتایج حاصل از آن در نمودارهایی ارائه گردید. با توجه به اینکه مقدار فشارهای حداکثر و حداقل پشت انشعاب به میزان قابل توجهی نسبت به حالت بدون انشعاب کاهش می­یابد لذا روابطی جهت پیش­بینی فشارهای کمینه و بیشینه بعد از انشعاب نیز ارائه گردید.}, keywords_fa = {جریان میرا,لوله انشعاب,موج فشاری,ضربه قوچ}, url = {https://jise.scu.ac.ir/article_11057.html}, eprint = {https://jise.scu.ac.ir/article_11057_6dc427c6c92891704531f278bc996e03.pdf} } @article { author = {Fouladfar, Hesam and Shafaei Bajestan, Mahmood and Fathi Moghadam, Manoochehr}, title = {Physically Based New Formula for Cohesive Bed Erosion Rate}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {63-76}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = { The currently most widely used erosion models are poorly based on physical principles and lack the ability to describe erosion of the consolidated sediment bed at increased shear stresses e.g. during a storm. There is a need for a new modeling approach that is both fast and accurate. A new erosion formulation is proposed that regards the bed shear stress as a stochastic variable and allows erosion only when the actual bed shear stress exceeds the actual yield strength at the interface. There is a formulation that relates the actual yield strength to the density and the cohesion. In the formula, is assumed that the potential erosion flux is the same as entrainment flux of fluid mud under turbulent flow. The formulation needs eight physical input parameters. The five shear strength parameters can be determined from standard consolidation experiments in a settling column as well as soil mechanical tests. The other two physical parameters have to be determined by means of relation concerning to erosion on fluid mud and shear parameter. For the last parameter, namely coefficient of the probability distribution of the bed shear stress, No standardized laboratory tests are yet available and should be estimated during calibration process. The formula has been validated on short term erosion experiments performed in a straight flume on the bed sediments of the junction of Sefidrud dam reservoir and Ghezel Ozan river. These erosion experiments have been performed on the same beds that were measured in the consolidation experiments used to validate the parameterization. In the straight flume seven experiments have been performed. The model can simulate the results from the flume experiment well. The simulations show the same characteristic exponential decay evolution of the eroded material height. Moreover, the model can be calibrated well in a qualitative sense.}, keywords = {Cohesive bed erosion,Consolidation,Shear Stress,Shear strength,Erosion coefficient rate,Entrainment,Dry density,Calibration}, title_fa = {فرمولی فیزیک مبنا برای شار فرسایش بستر چسبنده}, abstract_fa = {فرمول‌های مورد استفاده برای محاسبه نرخ فرسایش بستر چسبنده فاقد مبانی فیزیکی بوده و قادر به تشریح فرسایش بستر در حال تحکیم و در معرض سیلاب ها و طوفان ها نمی باشند، لذا نیاز به رویکرد و فرمول و الگوریتم مدل سازی جدیدی می‌باشد که دارای سرعت و دقت کافی و لازم جهت استفاده در مدل سازی کیفیت آب  باشد. فرمول جدید پیشنهادی، تنش برشی بستر را به صورت یک متغیر احتمالاتی ساده تک متغیری در نظر می‌گیرد. این فرمول،  نرخ فرسایش پتانسیل را معادل نرخ فرسایش از روی گل روان که به عنوان پدیده اختلاط کاملاً قابل تحلیل می‌باشد، در نظر می‌گیرد. در فرمول، تنش برشی بحرانی معادل مقاومت برشی بستر در حالت زهکشی شده و در نزدیکی سطح مشترک بستر و بدنه جریان در نظر گرفته شده است. مقاومت برشی واقعی بستر را می توان با کمک روابط موجود به چگالی خشک رسوبات بستر و چسبندگی ارتباط داد. فرمول پیشنهادی نیاز به هشت متغیر دارد. هفت متغیر آن را می‌توان با کمک آزمایش‌های مکانیک خاک و استوانه تحکیم و روابط موجود اندازه گیری کرده و به برآوردهای قابل قبولی از آنها دست پیدا کرد.  تنها متغیری که قابل محاسبه نبوده و باید در مرحله واسنجی مورد ارزیابی قرار گیرد، ضریب مربوط به توزیع احتمال تنش برشی لحظه ای می‌باشد. برای ارزیابی فرمول، بعد از نمونه برداری از آب و رسوبات بستر مصب مخزن سد سفیدرود در ناحیه ورود رودخانه قزل اوزن،آزمایش های کوتاه مدت فرسایش در یک فلوم مستقیم با امکان گردش آب و رسوب و آزمایش های تحکیم در یک استوانه تحکیم انجام شد. در فلوم مستقیم برای هفت دوره تحکیم (بارگذاری ناشی از وزن)، چندین مجموعه آزمایش انجام شد. فرمول پیشنهادی نتایج آزمایشگاهی را با دقت مناسبی شبیه سازی نموده و به خوبی ظرفیت واسنجی دارد.}, keywords_fa = {فرسایش بستر چسبنده,تحکیم,تنش برشی,مقاومت برشی,ضریب نرخ فرسایش,اختلاط,چگالی خشک,واسنجی}, url = {https://jise.scu.ac.ir/article_11058.html}, eprint = {https://jise.scu.ac.ir/article_11058_3b5ec19f87fadf4aac24d998ed954dbe.pdf} } @article { author = {Yabarehpoor, Elham and Kashefipour, Seyed Mahmood}, title = {Comparison of Bed Topography for the Permeable and Impermeable Spur Dikes Group}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {77-86}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     In recent decades spur dike has been one of the methods for bank protection and sediment deposition in rivers. In fact the spur dikes decrease the erosion and sediment potential rate of flow between them by improving the flow hydraulic conditions and controlling the shear velocities. Spur dike construction creates new conditions in river, which causes scour around the spur dike. Having knowledge about the amount of scour and sedimentation patterns around the spurs, helps for better and improved design of dikes. Therefore in this study the scour and sedimentation patterns around a Series of permeable and impermeable spur dikes is investigated. The experiments were carried out under the conditions of clear water and the percent of permeability of 0%(closed)to 50% in a flume with 0.56m-wide,7.3m- long and 0.6m-depth. The results show that the maximum depth of scour around the series of spur dikes and the amount of deposition between spurs reduced with increasing the spur permeability.}, keywords = {Spur Dike,Permeable spur dike,River bank protection,Bed topography,Series of spur dike}, title_fa = {مقایسه توپوگرافی بستر برای سری آبشکن‌های نفوذپذیر و نفوذناپذیر}, abstract_fa = {استفاده از آبشکن‌ها یکی از روش‌هایی است که به طور معمول برای حفاظت از سواحل و به منظور ساماندهی در دهه‌های اخیر در رودخانه‌ها مورد توجه قرار گرفته است. در واقع آبشکن‌ها با‌ اصلاح شرایط هیدرولیکی جریان، قدرت فرسایشی آب و توان حمل رسوبی را در فاصله دو آبشکن کاهش داده و زمینه رسوب‌گذاری و تثبیت کناره‌های رودخانه را فراهم می‌آورند. با ساخت آبشکن شرایط جدیدی در رودخانه ایجاد می‌شود که منجر به آبشستگی اطراف دماغه آبشکن‌ها می‌گردد. با اطلاع از میزان آبشستگی و الگوی جریان اطراف آبشکن‌ها می‌توان طراحی آبشکن را با دقت بیشتری انجام داد. در این تحقیق به بررسی آزمایشگاهی آبشستگی و رسوب‌گذاری اطراف سری آبشکن‌هاپرداخته شده است. آزمایش‌ها در شرایط آب زلال و با آبشکن‌های با درصدهای نفوذپذیری 0درصد (بسته) تا 50 درصددرون فلومی به عرض 56/0 متر و طول 3/7 متر و ارتفاع 6/0 متر انجام شد. نتایج نشان داد که با افزایش درصد نفوذپذیری، حداکثر عمق آبشستگی اطراف آبشکن‌ اول به میزان 75 درصد کاهش پیدا کرد و همین‌طور میزان حجم رسوب‌گذاری بین آبشکن‌ها با افزایش نفوذپذیری آبشکن کاهش یافت.}, keywords_fa = {آبشکن نفوذپذیر,حفاظت ساحل رود خانه,توپوگرافی بستر,سری آبشکن‌ها}, url = {https://jise.scu.ac.ir/article_11059.html}, eprint = {https://jise.scu.ac.ir/article_11059_0747c396d71aa402c2107dad5adf68b7.pdf} } @article { author = {Momtazan, Mahnaz and Moazed, Hadi and Pourreza, Nahid}, title = {Removal of Cadmium from Drinking Water using Reverse Osmosis Process}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {87-96}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     According to the present heavy metal pollution is a universal phenomenon, thus concerns about long-term effects of these metals, is increasing. The heavy metal cadmium as a toxic element exposure in humans can cause a variety of symptoms, because of its ability to accumulate in various tissues. The objective of this research was to evaluating the performance of the reverse osmosis system in cadmium removal from drinking water. The standard solution made in laboratory scale, then the removal efficiency of cadmium by semi-permeable membrane for reverse osmosis system (model: FT-30), under the influence of parameters concentration, pH and pressure were investigated. The results of this study showed that in the standard temperature 20 ºC , the concentration 50 ppb, pressure 350 (Kpa) and pH of about 6.8, cadmium removal efficiency by reverse osmosis system was above 98 percent. Thus, can be concluded that reverse osmosis, an ideal method to cadmium removal in areas with contaminated water to this metal.}, keywords = {Cadmium,Drinking water,Reverse osmosis,Removal}, title_fa = {حذف کادمیوم از آب آشامیدنی با استفاده از روش اسمز معکوس}, abstract_fa = {در حال حاضر آلودگی ناشی از فلزات سنگین یک پدیده جهان شمول است، بنابراین نگرانی در مورد آثار دراز مدت این فلزات رو به افزایش است. کادمیوم یکی از فلزات سنگین سمی است که به­دلیل تجمع پذیری در بافت­های مختلف، سبب ایجاد عوارض مختلفی در انسان می­شود. هدف از انجام این تحقیق، ارزیابی عملکرد فرآیند سیستم اسمز معکوس برای حذف کادمیوم از آب آشامیدنی می­باشد. بدین منظور، محلول استاندارد در مقیاس آزمایشگاهی تهیه، آنگاه کارایی حذف کادمیوم توسط غشاء نیمه تراوا اسمز معکوس (مدل FT-30)  تحت تأثیر پارامترهای غلظت، pH و فشار بررسی شد. نتایج نشان داد در صورتی که در دمای استاندارد 20 درجه سانتی گراد، غلظت 50 میکروگرم در مترمکعب، فشار 350 کیلوپاسکال و pH برابر8/6 باشد، راندمان حذف کادمیوم توسط سیستم اسمز معکوس بالای 98 درصد است. همچنین نتایج مطالعه حاضر نشان داد که میانگین غلظت کادمیوم در آب خروجی از دستگاه اسمز معکوس (29/1 میکروگرم در مترمکعب)، زیر حد مجاز استاندارد تعیین شده توسط سازمان حفاظت محیط زیست ایالات متحده (5 میکروگرم در مترمکعب(، سازمان بهداشت جهانی (2 میکروگرم در مترمکعب)و ایران (3 میکروگرم در مترمکعب) بود. بنابراین می­توان نتیجه گرفت که روش اسمز معکوس، یکی از روش­های بسیار مطلوب برای حذف کادمیوم در مکان­های دارای آب آلوده به این فلز است.}, keywords_fa = {کادمیوم,آب آشامیدنی,اسمز معکوس,حذف}, url = {https://jise.scu.ac.ir/article_11060.html}, eprint = {https://jise.scu.ac.ir/article_11060_1defb38d8aac71424ae3cda0eed77350.pdf} } @article { author = {Sheikhi Nejad, Bahareh and Ghomeshi, Mehdi}, title = {Investigate of Effect of Cylinder Roughness on Maximum Velocity of Density Current Body}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {97-107}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     Sedimentationin the dam reservoirs reduces storage volume sand as a result the useful life of the dam reduced.In deep dam reservoir the turbidity current usually are the reason of transport and deposition of sediment. If turbidity current completely stopped in middle regions of reservoir or not to allow deposition in sensitive areas, sediment deposition will decreased near dam wall and the main tasks of the dam will not be disrupt. Roughen the bed is a technique for changing the turbidity current hydraulic or slow it.Therefor in present research has been investigated the body velocity distribution of the density current on the bed with cylinder roughness and has been provided a relation for maximum velocity of body. A series of gravity currents experiment were performed into 35 cm width flume with 9 m length. The experiments developed as salinity fluid flow with 3 concentrations of 10, 15 and 20 lit/s in slop bed renge of 0.5, 1.25 and 2% and 3 roughness height of 25, 40 and 55 mm. The result indicates that the bed slope is in direct relationship with body velocity. Increasing the bed slop causes the maximum body velocity is closer the bed. And increases Roughness height reduces body velocity to certain extent.}, keywords = {Density current,Head velocity,Cylinder Roughness}, title_fa = {بررسی سرعت بیشینه در بدنة جریان غلیظ بر روی بستر با زبری‌های استوانه‌ای}, abstract_fa = {رسوبگذاری در مخازن سدها سبب کاهش حجم ذخیره و در نتیجه کاهش عمر مفید مخزن خواهد شد. در مخازن سدها با عمق زیاد، جریان غلیظ معمولاً عامل انتقال و ته­نشینی رسوبات است. اگر جریان غلیظ به طور کامل در مناطق میانی سد متوقف شود یا اجازه رسوبگذاری در نقاط حساس به آن داده نشود مقدار رسوبگذاری در پای دیواره سد کاهش یافته و در نتیجه وظایف اصلی سد مختل نخواهد شد. یکی از روش­های تغییر هیدرولیک جریان غلیظ و کند کردن آن، زبر کردن بستر است. بنابراین در تحقیق حاضر سعی شده است پروفیل سرعت بدنة جریان غلیظ بر روی بستر با زبری­های استوانه­ای مورد بررسی قرار گیرد و رابطه­ای برای سرعت بیشینه در بدنة جریان غلیظ ارائه شود. آزمایش­ها در فلومی به عرض 35 سانتی­متر، ارتفاع 70 سانتی­متر و طول 9 متر با تزریق جریان غلیظ نمکی در   غلظت­های 10، 15 و 20 گرم بر لیتر و سه شیب 5/0 ، 25/1 ، 2 درصد و زبری های استوانه­ای با ارتفاع 25، 40 و 55 میلی متر انجام شد. نتایج نشان می داد شیب بستر رابطه مستقیم با سرعت بدنة جریان غلیظ دارد، افزایش شیب باعث می­شود سرعت بیشبنه بدنه در ارتفاع پایین­تری اتفاق افتد، زبری­ها باعث کاهش سرعت بیشینه بدنه جریان غلیظ می­شوند و افزایش ارتفاع زبری، تا حد معینی باعث کاهش سرعت بدنه می شود.}, keywords_fa = {جریان غلیظ,سرعت بیشینه بدنه,زبری استوانه‌ای}, url = {https://jise.scu.ac.ir/article_11061.html}, eprint = {https://jise.scu.ac.ir/article_11061_e16cc093709db681cec3b1614c3fdfd5.pdf} } @article { author = {Jafari Talukolaee, Mehdi and Shahnazari, Ali and Ziatabar Ahmadi, Mir Khalegh and Darzi Naftchali, Abdolallah}, title = {Investigation of Subsurface Drainage Water Quality in Paddy Fields Based on the Design Parameters}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {109-119}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {To prevent flooding and water logging condition and to provide cultivation condition for fall and winter seasons, installation of subsurface drainage is necessary in large areas of Northern Iran paddy fields. The correct design of depth and spacing of drainage systems causes minimum negative effects of drainage water on the environment. In this research, the effects of different drainage systems on the Sodium, Chloride and Sulfate of drainage water in 4.5 ha of paddy fields of Sari Agricultural Sciences and Natural Resources University (SANRU) during two successive growing seasons of rice and canola have been investigated. The experimental treatments were: Four subsurface drainage systems including drainage system with 0.9 m drain depth and 30 m drain spacing with mineral envelope (D0.9 L30), 0.65 m drain depth and 30 m drain spacing with mineral envelope (D0.65 L30), 0.65 m drain depth and 15 m drain spacing with mineral envelope  (D0.65 L15S), and 0.65 m drain depth and 15 m drain spacing with Geotextile envelope (D0.65L15F) and a bi-level subsurface drainage system with 15 m drain spacing and drain depths of 0.65 and 0.9 m as alternate depths (Bi-level). During the study period, Na, Cl and SO4 of drainage water were measured. Based on the results, by increasing drain spacing from 15 m to 30 m, the average Na, Cl and SO4 of drainage water decreased. Also, the minimum Na, Cl and SO4 concentration and total dissolved drained were for D0.9L30 treatment. So, it can be concluded that this drainage system had less environmental effect with respect to other drainage systems, from drain water quality point of view.  }, keywords = {Sodium,Chloride,Sulfate,Drain depth and spacing,Environment}, title_fa = {بررسی کیفیت زه‌آب زهکش‌های زیرزمینی اراضی شالیزاری براساس پارامترهای طراحی}, abstract_fa = {برای رفع وضعیت غرقابی و ماندابی بخش وسیعی از شالیزارهای شمال ایران و برقراری شرایط کشت در فصل­های پاییز و زمستان، احداث سیستم­های زهکشی زیرزمینی ضروری می­باشد. طراحی مناسب عمق و فاصله سیستم زهکشی باعث به حداقل رساندن اثر منفی زه­آب­ها بر محیط زیست خواهد شد. در این تحقیق، اثر سیستم­های مختلف زهکشی بر میزان سدیم، کلر و سولفات زه­آب در 5/4 هکتار از اراضی شالیزاری دانشگاه علوم کشاورزی و منابع طبیعی ساری در طول دو فصل کشت برنج و کلزا بررسی شد. تیمارهای مورد آزمایش عبارت بودند از: چهار سیستم زهکشی زیرزمینی با عمق 9/0 متر و فاصله زهکش 30 متر با پوشش معدنی (D0.9L30)، عمق 65/0 متر و فاصله زهکش 30 متر با پوشش معدنی (D0.65L30)، عمق 65/0 متر و فاصله زهکش 15 متر با پوشش معدنی (D0.65L15S) و عمق 65/0 متر و فاصله زهکش 15 متر با پوشش مصنوعی (D0.65L15F) و یک سیستم زهکشی زیرزمینی دو عمقی با فاصله زهکش 15 متر و اعماق نصب 65/0 و 9/0 متر به­صورت یک در میان (دوعمقی). در طول مدت مطالعه، میزان سدیم، کلر و سولفات زه­آب زهکش­ها اندازه­گیری شد. براساس نتایج، با افزایش فاصله زهکش­ها از 15 متر به 30 متر، میزان متوسط سدیم، کلر و سولفات زه­آب زهکش کاهش یافت. همچنین، کمترین مقادیر غلظت سدیم، کلر، سولفات و کل املاح خروجی مربوط به تیمار D0.9L30بود. در نتیجه، این سیستم زهکشی از نظر کیفیت زه­آب اثر منفی زیست محیطی کمتری در مقایسه با سیستم­های دیگر در پی داشت.}, keywords_fa = {سدیم,کلر,سولفات,عمق و فاصله زهکش,محیط زیست}, url = {https://jise.scu.ac.ir/article_11062.html}, eprint = {https://jise.scu.ac.ir/article_11062_ac8657123970e69aca0e86216ac9e4f9.pdf} } @article { author = {Akbarzadeh, Mohammad Reza and Ghezelsofloo, Abbas Ali and Hajibigloo, Mahbobeh}, title = {Assessment of Atrak River Sediment at the Hydrometric Stations with Data Using Hydrological Methods}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {121-132}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     In a catchment, deposition of the erosion process is influenced by factors such as degraded pastures, land use change, agriculture non-normative and others may occur. That causes problems such as sedimentation in reservoirs, reducing their, effective volume reduction and water quality. For sustainable and watershed management and to prevent soil loss and sediment in the river and basin, It also plans to build watershed protection is required to estimate suspended sediments in rivers. In the present study, in order to select the most appropriate method for estimating suspended sediment in hydrometric stations Barzu, Babaaman, Ghatlesh, Darband, Aghmazar, Tabarok Abad  on the river Atrak, The corresponding data flow and sediment discharge during the period were collected and analyzed. The relationship between water discharge and sediment load values based on five linear model, linear combination (multi-line), linear correction FAO, middle class and graphical methods (tangent to the line of maximum concentration), to select the appropriate model the best prediction based on the statistical indicators. In order to, the index of root mean square error (RMSE), coefficient of determination (R2), the estimated mean of the observations (r), coefficient of variation (Cv), the root mean square error of the estimated mean (GSD), the correlation coefficient between estimated and observed sediment (R), mean absolute error (MAE) and mean bias error (MBE) was used. Results showed intermediate model categories in Tabarok abad station, linear model in aghmazar and barzu station, Model drawing (maximum concentration) in Babaaman and Ghatlesh station, hybrid model (multi-line) in Darband station, among the models tested was the lowest rates and the best mean square error in estimating the predicted precipitation stations is studied.  }, keywords = {Suspended sediment,Sediment rating curves,Hydrological methods,Statistical parameters}, title_fa = {ارزیابی و برآورد رسوب رودخانه اترک در محل ایستگاه‌های هیدرومتری دارای آمار با استفاده از روش‌های هیدورلوژیکی}, abstract_fa = {در یک حوضه آبخیز، رسوب در اثر فرآیند فرسایش تحت تأثیر عواملی مانند تخریب مراتع، تغییر کاربری، کشاورزی غیر اصولی و سایر موارد به وجود می­آید که مشکلاتی نظیر رسوبگذاری در مخازن سدها، کاهش حجم مفید آنها، کاهش کیفیت آب و.. را سبب می­شود. برای پایداری و مدیریت حوضه و برای ممانعت از هدررفت خاک و رسوب در حوضه و رودخانه، همچنین برای احداث طرح­های حفاظتی آبخیزداری نیاز به تخمین میزان رسوب معلق در رودخانه­ها می­باشد. در تحقیق حاضر به منظور انتخاب مناسب­ترین روش برآورد رسوب معلق در ایستگاه­های هیدرومتری بارزو، باباامان، قتلش، دربند، آغمزار، تبرک­آباد واقع بر رودخانه اترک،  داده­های متناظر دبی جریان و دبی رسوب در طی دوره آماری موجود جمع­آوری و مورد تجزیه و تحلیل قرار گرفت. با برقراری رابطه بین مقادیر متناظر دبی آب و دبی رسوب براساس پنج مدل خطی، خطی ترکیبی (چند خطی)، خطی با اعمال تصحیح فائو، حد وسط دسته­ها و روش ترسیمی (مماس بر خط حداکثر غلظت)، اقدام به انتخاب مدل مناسب که دارای بهترین قابلیت پیش­بینی باشد، براساس شاخص­های آماری گردید. به این منظور، از شاخص­های جذر میانگین مربعات خطا، ضریب تبیین، نسبت میانگین داده­های برآوردی به مشاهداتی، ضریب تغییرات، نسبت جذر میانگین مربعات خطا به میانگین داده­های برآوردی، ضریب همبستگی بین رسوبات برآوردی و مشاهداتی، میانگین قدر مطلق خطا و میانگین انحراف خطا استفاده شد. نتایج نشان داد مدل حد وسط دسته­ها در ایستگاه تبرک آباد، مدل خطی در ایستگاه آغمزار و بارزو، مدل ترسیمی (حداکثر غلظت) در ایستگاه باباامان و قتلش، مدل ترکیبی (چند خطی) در ایستگاه دربند در بین مدل­های مورد آزمون دارای کمترین میزان میانگین مربعات خطا بوده و بهترین قابلیت پیش­بینی را در برآورد رسوب ایستگاه­های مورد مطالعه داراست.}, keywords_fa = {رسوب معلق,منحنی سنجه رسوب,روش‌های هیدرولوژیکی,پارامترهای آماری}, url = {https://jise.scu.ac.ir/article_11063.html}, eprint = {https://jise.scu.ac.ir/article_11063_9912b4cae62476ee0908e193ad106a63.pdf} } @article { author = {Ghobadian, Rasiul and Farhadi, Bahman and Maleki, Ramin and Farmanifard, Milad}, title = {2D/3D Numerical Simulation of Saturated and Unsaturated Soil Characteristics and Comparison with Tension Disc}, journal = {Irrigation Sciences and Engineering}, volume = {37}, number = {4}, pages = {133-143}, year = {2015}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {     Importance of determining unsaturated soils hydraulic properties in solute transport and water flow is always regarded by soil science engineers. Among these properties is the hydraulic conductivity that should be determined at different suction. Unsaturated hydraulic conductivity is estimated using the traditional Wooding analysis at steady state condition for tension disc. Estimating of hydraulic parameters using numerical solution of flow equations and the parameter optimization with inverse solution method is one of the conventional methods that its accuracy is dependent on soil type.In this study, saturated and unsaturated hydraulic conductivity was measured in 5 suctions 20, 15, 10, 5 and 0 cm from experiment tension disc on four samples of cylindrical clay soil with diameter of 56 cm and height of 75 cm. Then, the results of tension disc were compared with inverse solution. TheHydrus 2D/3D model was used for inverse solution with Van Genuchten-Mualem method. Optimization process was done based time, cumulative infiltration data, saturated hydraulic conductivity and α parameters obtained from the analysis of the tension disc. Then the optimizedparameters in 2D were used for 3D model simulation. The average standard error of optimized θr, n and L was obtained 0.011, 0.078 and 0.117, respectively. The results showed that the unsaturated hydraulic conductivity obtained from the model is less than the values ​​measured by tension disc. However, the low suctionsindicated betteragreement than higher suctions. Additionally, the maximum and minimum value ofsimulation error ofunsaturated hydraulic conductivity was found in suctions 5 and 20 cm equal to 6.50% and 60.0%, respectively.}, keywords = {Tension disc,Inverse solution,Hydraulic conductivity,Optimization,Hydrus model}, title_fa = {شبیه‌سازی عددی پارامترهای هیدرولیکی اشباع و غیر اشباع خاک در شرایط دو و سه بعدی و مقایسه با دیسک تنشی}, abstract_fa = {     اهمیت تعیین مشخصات هیدرولیکی خاک­های غیر اشباع در انتقال املاح و جریان آب همواره مورد توجه مهندسان علوم خاک قرار گرفته است. از جمله این مشخصات هدایت هیدرولیکی است که باید در مکش­های مختلف تعیین گردد. هدایت هیدرولیکی غیر اشباع به دست آمده از دیسک تنشی به صورت سنتی از تحلیل وودینگ در حالت پایدار محاسبه می­شود. تخمین پارامترهای هیدرولیکی با حل عددی معادله­های جریان و بهینه­سازی پارامتر­ها به روش حل معکوس یکی از روش­های مرسوم است که دقت آن بستگی به نوع خاک دارد. در این تحقیق هدایت هیدرولیکی در شرایط مختلف رطوبتی (اشباع و غیر اشباع) در پنج مکش 20، 15، 10، 5 و صفر سانتی­متر با دیسک تنشی بر روی چهار نمونه استوانه­ای شکل خاک سیلتی رسی با قطر 56 و ارتفاع 75 سانتی­متر اندازه­گیریشد. سپس نتایج حاصل از دیسک تنشی و حل معکوس مقایسه شدند. حل معکوس و شبیه­سازی جریان با مدل هایدروس دو و سه بعدی با روش ون­گنختون-­ معلم انجام شد. بهینه ­سازی بر اساس داده­های زمان، نفوذ تجمعی و پارامترهای هدایت هیدرولیکی اشباع و α به دست آمده از تحلیل داده­های دیسک تنشی انجام گردید. از نتایج بهینه سازی در شرایط دو بعدی برای اجرای برنامه در حالت سه بعدی استفاده شد. مقادیر میانگین خطای استاندارد پارامترهای θr، n و Lبهینه شده به ترتیب 011/0، 078/0 و 117/0 به دست آمد. نتایج تحقیق نشان ­داد هدایت هیدرولیکی غیر اشباع بدست آمده از مدل همواره کمتر از مقادیر اندازه­گیری شده به وسیله­ دیسک تنشی می­باشد، هر چند در مکش­های کم مطابقت بهتری (خطای کمتری) در مقایسه با مکش­های بالاتر نشان می­دهند. همچنین کمترین و بیشترین مقدار خطا در شبیه­سازی هدایت هیدرولیکی غیر اشباع در مکش­های 5 و 20 سانتی­متربه ترتیب برابر با 50/6و 0/6 درصدبه دست آمد.}, keywords_fa = {دیسک تنشی,حل معکوس,هدایت هیدرولیکی,بهینه سازی,مدل هایدروس}, url = {https://jise.scu.ac.ir/article_11064.html}, eprint = {https://jise.scu.ac.ir/article_11064_3a8e35986f98a4c60fe91fc8be9b39d4.pdf} }