@article { author = {Shabani, Bahareh and Mousavi–Baygi, Mohammad and Jabari –Noghabi, Mohammad}, title = {Prediction of Water Requirement Changes some of Agricultural Products of Mashhad Plain due to Air Temperature Changes}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {1-13}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12102}, abstract = {     Air temperature is one of the most important indicators of climate change in global and regional scales, that its changes will affect also on the other climatic parameters and also on other sectors such as agriculture and water use in this section. With increasing air temperature is expected potential evapotranspiration increase. Therefore, in this study using time series were performed modeling and prediction monthly maximum and minimum temperatures of Mashhad plain. Then with the help of empirical formulas Hargreaves - Samani and by selecting crop coefficients were calculated potential evapotranspiration rates and crops water requirement of 5 major products with the largest area under irrigated including wheat, sugar beets, tomatoes, alfalfa, and apples for the base period (1987-2008) and next 10-years period (2009-2018). During the growing season, and were compared with each other. The results show that the maximum and minimum temperatures will increase respectively by 1.4 and 1 ° C. So that the maximum temperature more in warm seasons and minimum temperature more in cold seasons will increase. Prediction of  potential evapotranspiration showed that the changes will be more affected by maximum temperature changes Also the comparison of water requirement of different crops indicated increase evapotranspiration in the future between the future and the base periods. So that among the five selected crops in Mashhad plain, sugar beet has the highest percentage of changes in water requirement equal to2.8% (290 m3/ha).}, keywords = {Time series,Water requirement,Evapotranspiration}, title_fa = {پیش‌بینی تغییرات نیاز آبی برخی از محصولات کشاورزی دشت مشهد ناشی از تغییرات دمای هوا}, abstract_fa = {دمای هوا یکی از مهم­ترین شاخص­های تغییر اقلیم در مقیاس جهانی و منطقه­ای می­باشد که تغییرات آن هم بر  روند سایر پارامترهای اقلیمی و هم بر بخش­های دیگری از جمله بخش کشاورزی و مسئله مصرف آب در این بخش تأثیر گذار خواهد بود. با افزایش دمای هوا انتظار می­رود که قدرت تبخیر­کنندگی هوا یا تبخیر و تعرق پتانسیل افزایش یابد. لذا در پژوهش حاضر با استفاده از روش سری­های زمانی، مدل­سازی و پیش­بینی دمای حداکثر و حداقل ماهانه دشت مشهد انجام گرفت. سپس با کمک فرمول تجربی هارگریوز –سامانی میزان تبخیر و تعرق پتانسیل و با انتخاب ضریب گیاهی مناسب، نیاز آبی پنج محصول عمده زراعی و باغی دشت مشهد با بیشترین سطح زیر کشت آبی (گندم، چغندرقند، گوجه فرنگی، یونجه و سیب) در طول فصل رشد برای دهه آتی و دوره پایه محاسبه و میانگین دو دوره با یکدیگر مقایسه گردید. نتایج پیش­بینی­ مدل­ها حاکی از آن است که دمای حداقل و حداکثر در آینده به ترتیب با افزایشی برابر با 4/1 و 1 درجه سانتی گراد همراه خواهند بود به طوری که دمای حداکثر بیشتر در فصول گرم سال (بهار و تابستان) و دمای حداقل بیشتر در فصول سرد سال (پاییز و زمستان) افزایش خواهند داشت. پیش­بینی تغییرات تبخیر و تعرق پتانسیل نشان داد که تغییرات آن بیشتر تحت تأثیر تغییرات دمای حداکثر خواهد بود. همچنین مقایسه نیاز آبی محصولات مختلف بین دو دوره آتی و پایه نشان دهنده افزایش تبخیر و تعرق گیاهان در آینده می­باشد به طوری از بین پنج محصول منتخب در دشت مشهد، چغندرقند دارای بیشترین درصد تغییرات در نیاز آبی برابر با 8/2 درصد و معادل با 290 مترمعکب آب مصرفی در هر هکتار خواهد بود.}, keywords_fa = {سری زمانی,نیاز آبی,تبخیر و تعرق}, url = {https://jise.scu.ac.ir/article_12102.html}, eprint = {https://jise.scu.ac.ir/article_12102_0d807f9ae57552cd2f2f7bbca9c759a1.pdf} } @article { author = {Jalili, Ameneh and Ghomeshi, Mehdi}, title = {Influence of Netted Collar on Scour depth around of Cubic Bridge Pier}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {15-25}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12108}, abstract = {     Two major factors causing of scour around bridge piers are the down flow occurred in upstream part of the piers and separation of streamlines from piers called horseshoe  vortex. Installation of a collar on a pier will reduce the power of the down flow and horseshoe vortex. In this study, the effects of placement of collar and netted collars on scour depth of cubic pier are investigated. The experimental flume was rectangular with the length of 7.3 meters, width of 0.56 m and a depth of 0.6 m. For this propose four collars included, one simple and three netted (with opening parts equal to 15percent, 30percent and 40percent), are tested under clear water condition. The experiments were performed in laboratory flume on Hydraulics Laboratory of Shahid Chamran University. The collars were installed in three levels equal to 0.5B, 0.25B and on the bed. The results were compared with the pier without the collar, and showed that the netted collar reduce the maximum scour depth between 34percent to 97percent in comparison with the case of no collar used. Also in low Froude Numbers, the netted collars showed better protection in comparison with the simple one.}, keywords = {Scour,Cubic Pier,Collar,Netted Collar}, title_fa = {اثر حضور طوقه‌ مشبک بر عمق آب‌شستگی اطراف پایه پل مکعبی شکل}, abstract_fa = {     دو عامل مهم باعث ایجاد آب­شستگی اطراف پایه های پل می شوند؛ یکی برخورد جریان با پایه و دیگری جدایی جریان از پایه. نصب طوق از تماس مستقیم جریان پایین رونده در جلو پایه با بستر رودخانهجلوگیری می­کند و توان گرداب نعل­اسبی را کاهش می­دهد. در این تحقیق، اثر قرارگیری طوق مشبک و طوق ساده بر آب­شستگی اطراف پایه پل مکعبی به ابعاد 40 میلی­متر و در فلومی به طول 3/7 متر، عرض 56/0 متر و عمق 6/0 متر مورد بررسی قرار گرفت. برای این منظور آزمایش­ها با چهار طوقه ساده، 15، 30 و 40 درصد مشبک تحت سه عدد فرود 19/0، 16/0 و 13/0 در شرایط آب زلال، در آزمایشگاه هیدرولیک دانشگاه شهید چمران اهواز انجام شد. عملکرد طوقه­ها در سه تراز B5/0، B25/0 و روی بستر رسوبی بررسی و با نتایج پایه بدون طوقه مقایسه گردید. نتایج آزمایش­ها بین 34 تا 97 درصد کاهش در عمق بیشینه آب­شستگی را در حضور طوقه­های مشبک نشان داد. هم­چنین با کاهش فرود جریان در تمامی طوقه­ها با درصد­های بازشدگی­­ مختلف، میزان آب­شستگی کاهش یافت.}, keywords_fa = {آب‌شستگی,پایه پل مکعبی,طوقه ساده,طوقه مشبک}, url = {https://jise.scu.ac.ir/article_12108.html}, eprint = {https://jise.scu.ac.ir/article_12108_6a17db2b65e55c3a207489e2a7734fa4.pdf} } @article { author = {Elahi, Afsaneh and Kasefipour, Mahmood}, title = {Laboratory Analysis of the Flushing Cone Dimensions at the Upstream Bottom Outlets of Dam Reservoir for Different Entrance Shape of Bottom Outlets Using Pressure Flushing}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {27-37}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12109}, abstract = {     One of the most effective techniques for removing the deposited sediments from reservoirs is pressure flushing which has only much local effects. It is often applied as a clearing process to remove sediment saround the entrance of intakes.In order to make rational design of bottom outlets and other sediment flushing structures, the understanding of the characteristics of a scour funnel in under pressure flushing is significant. The physical model was constructed in the Hydraulic Laboratory at the Water Sciences Engineerin Faculty of Shahid Chamran University of  Ahvaz and by performing various experiments on the effect of bottom outlet shape on the volume and dimensions of flushing cone was experimentally investigated. For this purposes, the experiments on 4 bottom outlets with a circular, semicircular, rectangular and square cross-sectional area equal to 18 cm2, five water levels of 30, 45, 55, 65, 78 cm, resulting in five different discharges on the bottom outlet, was performed. The results of this survey revealed that the shape of the lower opening is an important parameter in hydraulic flushing, changing of which results in change of scouring diameter. Results also showed that for a specific water level in the reservoir and for a specific time the scouring dimension for square valves and semicircle valves are more than one of rectangular valves. The scouring dimensions of rectangular valves are more than one of circular valves. The difference is more perceptible in lower water heights (i. e. lower discharge). The length of scouring and the volume of flushing cone increases with incrsing head and is the least for circular valves.}, keywords = {Pressure flushing,Bottom outlet,Storage reservoirs,Water level,Flushing cone,Scour}, title_fa = {بررسی آزمایشگاهی ابعاد چاله آبشستگی در بالادست دریچه تحتانی مخزن سد برای شکل‌های مختلف دریچه روزنه‌ای با استفاده از رسوب‌شویی تحت فشار}, abstract_fa = {رسوب‌شویی هیدرولیکیتحت‌ فشار یکی از روش‌های مؤثر برای رفع مشکل رسوب‌گذاری در مخازن سد می‌باشد، که تأثیر بسیار موضعی داشته و برای خارج ‌کردن رسوبات نهشته شده اطراف ورودی آبگیر نیروگاه نیز به‌کار می‌رود. برای طراحی مناسب دریچه‌های تخلیه‌کننده‌ی تحتانی و سایر سازه‌های مرتبط با رسوب‌شویی هیدرولیکی مخازن، بررسی مشخصات حفره ایجاد شده در رسوب‌شویی تحت‌فشار امری ضروری به نظر می‌رسد. برای انجام این پژوهش یک مدل فیزیکی در دانشکده مهندسی علوم آب دانشگاه شهید چمران اهواز ساخته شد و با اجرای آزمایش‌های مختلف تأثیر شکل دریچه تحتانی بر روی حجم و ابعاد حفره رسوب‌شویی بررسی گردید. برای دست‌یابی به این هدف، آزمایش‌ها بر روی چهار دریچه با شکل‌های دایره‌، نیم‌دایره، مستطیل و مربع با سطح مقطع‌های یکسان 18 سانتی متر مربع، پنج ارتفاع آب 30، 45، 55، 65 و 78 سانتی متر و در نتیجه پنج دبی تخلیه متفاوت روی هر دریچه انجام گرفت. نتایج این تحقیق نشان داد، شکل دریچه تحتانی پارامتر مهمی در پدیده رسوبشویی هیدرولیکی می‌باشد و با تغییر آن، ابعاد حفره آبشستگی نیز تغییر می‌‎کند. نتایج همچنین نشان داد که به ازای یک ارتفاع آب ثابت در مخزن و در یک زمان مشخص، ابعاد آبشستگی برای دریچه‌های مربعی و نیم‌دایره‌ای بیشتر از دریچه‌ی مستطیلی و دریچه‌ی مستطیلی نیز بیشتر از دریچه‌ی دایره‌ای است و در ارتفاع‌های کمتر (دبی‌های کمتر) این تفاوت محسوس‌تر است. همچنین طول آبشستگی و حجم مخروط رسوب‌شویی با ارتفاع آب افزایش و برای دریچه دایره‌ای از همه کمتر است.}, keywords_fa = {رسوب‌شویی تحت فشار,تخلیه کننده تحتانی,مخازن سدها,تراز سطح آب,حفره رسوب‌شویی,آبشستگی}, url = {https://jise.scu.ac.ir/article_12109.html}, eprint = {https://jise.scu.ac.ir/article_12109_8b164af6a09123d16805273bd002b4cd.pdf} } @article { author = {Bagheri, Moustafa and Izadpanah, Zahra and Brooman nasab, Saeid and Khoramian, Mohammad}, title = {Estimation of Hydraulic Conductivity of Saturated and Unsaturated Soils Measured by Two Methods of Tillage Corn in Summer in the Northern Province of Khuzestan}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {39-48}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12110}, abstract = {     The soil hydraulic conductivity (Ks) is very important parameters in soil physic and the designing of drainage systems. In this study the basic infiltration rate, infiltration rate and the saturated and unsaturated soil hydraulic conductivity were determined in a randomized complete block design with three treatments and three replications in a corn field in north of Khuzestan (Dezful) in 2013. The treatments were including No Tillage (NT), Minimum Tillage (MT) and conventional Tillage (CT) methods. In order to compare the effect of mesearing method of saturated hydraulic conductivity with two methods of double rings and disc permeameter on tillage methods  the  factorial test were used. The messuring of disc permeameter was performed in 15, 10, 5, 3, zero suctions. The results showed that the basic infiltration rate, infiltration rate and saturated and unsaturated (exept 10 and 15 suctions) hydraulic conductivity in CT method were significantly higher than the other methods of tillage (P<0.01). Comparing of the two measuring methods showed there were significantly difference between them. According to this the value of saturated hydraulic conductivity in disc permeameter method was higher than double rings method.}, keywords = {Saturated and unsaturated hydraulic conductivity,Disc permeameter,Double rings,Tillage}, title_fa = {تخمین هدایت هیدرولیکی اشباع و غیر اشباع خاک و مقایسه دو روش اندازه‌گیری آن‌ها در سه روش خاک‌ورزی‌ در ذرت تابستانه درشمال استان خوزستان}, abstract_fa = {ضریب هدایت هیدرولیکی خاک از پارامتر‌های بسیار مهم در فیزیک خاک و طراحی سیستم‌های زهکشی است. در این تحقیق نفوذ پایه، سرعت نفوذ، هدایت هیدرولیکی اشباع و غیر‌اشباع در یک طرح بلوک‌های کامل تصادفی با سه تیمار و در سه تکرار در مزرعه ذرت در شمال خوزستان (دزفول) در سال 1392 تعیین گردید. تیمار‌ها شامل بی‌خاک‌ورزی (NT)، کم‌خاکورزی (MT) و خاک‌ورزی مرسوم بودند. به‌منظور مقایسه تاثیرروش اندازه‌گیری هدایت هیدرولیکی اشباع با دو روش استوانه دوگانه و نفوذسنج مکشی بر روش‌های خا‌ک‌ورزی از آزمون فاکتوریل استفاده گردید. اندازه‌گیری‌های نفوذسنج مکشی در مکش‌های 15 ،10 ،5 ،3 و صفر انجام شد. نتایج نشان داد که نفوذ پایه، سرعت نفوذ و هدایت هیدرولیکی اشباع و غیر اشباع (به جز در مکش‌های 10 و 15) در روش ‌خاک‌ورزی مرسوم به‌طور معنی‌دار از دو روش دیگر خاک‌ورزی بالاتر بود (01/0>P). مقایسه دو روش اندازه‌گیری نشان داد که بین دو روش اندازه‌گیری اختلاف معنی‌دار وجود داشت. بر این اساس مقدار هدایت هیدرولیکی اشباع در روش نفوذسنج مکشی نسبت به استوانه دوگانه بالاتر بود.}, keywords_fa = {هدایت هیدرولیکی اشباع و غیر اشباع,نفوذسنج مکشی,استوانه دوگانه,خاک}, url = {https://jise.scu.ac.ir/article_12110.html}, eprint = {https://jise.scu.ac.ir/article_12110_c8e7b03a61ce12c30b732c8e8157a11d.pdf} } @article { author = {Moghimi, Niloofar and Naseri, Abed Ali and Soltani Mohammadi, Amir and Garm Dareh, Seyed Ebrahim}, title = {Evaluation of Bagasse on Nitrate Reduction From Effluent Subsurface Drainage Water}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {49-58}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12111}, abstract = {In order to investigate the performance of sugarcane bagasse in the removal of nitrate from effluent subsurface drainage water, a study was conducted at the physical models laboratory of Water Sciences Engineering Faculty of Shahid Chamran University of Ahvaz, in the summer of 2013 till the summer of 2014. A physical model with the dimensions of                         , which simulated the drainage trench, was utilized in this experiment. Bagasse combined with soil by 3:7 volume ratio, the combination installed as a filter besides the drainage pipe. In this study, the influent nitrate concentration was 160 mg.L-1. Influent nitrate flow was continues. At first, every two days, and then every four days the drainage pipe was sampled. Input and output drainage model solution sampled with plastic bottles. Then some parameters like Nitrate, NH4, PH and EC measured. The presence of bagasse as a carbon material in the soil caused the amount of nitrate to reduce from 160 milligrams per liter to 60 milligrams per liter; a reduction of nearly more than 60 percent. The amount of ammonium increased very little in this study. The use of sugar cane bagasse as a filter drainage, reduces the acidity of the drainage outlet. It had no effect on the electrical conductivity. Physical model results show that the clogging of the filter in this period was relatively low and carbon filter had good performance. At first, the water output velocity was high but it decreased by time. According to analytics, the difference between input and output parameters in level of five percent were significant for acidity and electrical conductivity.}, keywords = {Sugar cane,Bagasse,Denitrification,Subsurface drainage,nitrate}, title_fa = {بررسی عملکرد باگاس نیشکر در کاهش نیترات خروجی از زهاب زهکش‌های زیرزمینی}, abstract_fa = {به منظور بررسی عملکرد باگاس نیشکر در حذف نیترات از زه‌آب زهکش های زیرزمینی، تحقیقی در آزمایشگاه مدل‌های فیزیکی دانشکده مهندسی علوم آب دانشگاه شهید چمران اهواز از تابستان 1392 تا تابستان 1393 انجام شد. برای انجام این آزمایش از یک مدل فیزیکی به ابعاد40×120×150 سانتی متر که ترانشه زهکشی را شبیه سازی می‌کرد استفاده شد سی درصد حجمی باگاس با هفتاد درصدحجمی خاک ترکیب شد و به عنوان فیلتر در کنار لوله زهکش کارگذاری شد.  در این مطالعه از محلول نیترات با غلظتی در حدود 160 میلی‌گرم در لیتر به عنوان زهاب ورودی استفاده شد. جریان ورودی از ابتدای مطالعه تا انتها به صورت پیوسته از سیستم عبور می‌کرد. در ابتدا هر دو روز یک بار و در ادامه هر چهار روز یکبار از خروجی لوله زهکش نمونه برداری شد.نمونه‌برداری از محلول ورودی و خروجی مدل زهکشی از طریق بطری‌های پلاستیکی انجام گرفت. سپس نیترات، آمونیوم، میزان اسیدیته، میزان هدایت الکتریکی نمونه های تهیه شده، تعیین گردید.نتایج نشان دادوجود باگاس نیشکر به عنوان ماده کربنی در خاک میزان نیترات را از 160 میلی گرم درلیتر به 60 میلی گرم در لیتر یعنی در حدود بیش از 60 درصد کاهش داد. دراین تحقیق میزان آمونیوم به میزان خیلی ناچیز افزایش یافت. استفاده از باگاس نیشکر به عنوان فیلتر زهکشی، باعث کاهش میزان اسیدیته در زهاب خروجی شد و تأثیری بر میزان هدایت الکتریکی نداشت. نتایج مدل فیزیکی نشان داد که گرفتگی این فیلتر در این مدت نسبتاً کم بوده و فیلتر کربنی عملکرد مناسبی داشته است. در ابتدای آزمایش میزان سرعت آب خروجی بالا بودولی با گذشت زمان سرعت خروجی آب کاهش یافت. طبق تحلیل های صورت گرفته،  اختلاف بین پارامتر ورودی و خروجی در سطح پنج درصد برای میزان اسیدیته و هدایت الکتریکی معنادار بود.}, keywords_fa = {باگاس نیشکر,دنیتریفیکاسیون,زهکش زیرزمینی,نیترات}, url = {https://jise.scu.ac.ir/article_12111.html}, eprint = {https://jise.scu.ac.ir/article_12111_37385be704844cb95bdd977a3754f3e7.pdf} } @article { author = {Rafiee, Mohammad Rafi and Moazed, Hadi and Ghaemi, Ali Asghar and Broomand nasab, Saeid}, title = {FAO-56 Method for Estimating Evapotranspiration and Crop Coefficients of Eggplant in Greenhouse and Outdoor Conditions}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {59-77}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12112}, abstract = {FAO-56 Penman-Monteth (FPM) model is one of the most applied methods to estimate crop evapotranspiration; yet the accuracy of the model in greenhouses is still undetermined especially in non-standard conditions of water deficit and salinity. This study focused on the performance of the FPM model in estimating greenhouse and outdoor eggplant evapotranspiration (ETc), crop coefficient (Kc) and water stress coefficient (Ks) under different levels of water deficit and salinity. An area in the greenhouse and the outdoor field was assigned to grass cultivation as a reference crop. Daily reference (ET0) and crop evapotranspirations were measured by diurnal weighting of microlysimeters throughout the growing season (from May 19th to September 5th, 2012). The performance of the FPM model was evaluated by four statistical difference criterions along with regression indices. The ET0 values were properly estimated in the outdoor conditions but showed about 12 percent underestimation in the greenhouse; however, the trends of daily ET0changes were well predicted in both environments. Apparent differences in daily ETc variations were met during the growing season, for various levels and combinations of water stress. Best estimations of daily and mean 10-day ETc values were those of daily irrigated (I1) treatments in both environments. In mean 10-day ETc, better correlations were obtained between the measured and estimated values due to smoothened fluctuations in weather and data and soil moisture changes. Actual and calculated values of Ks along with the correctness of their estimations decreased with the intensity of water stresses in both environments. The variation patterns of daily Kc values was similar to those of the daily ETc. Mean 10-day values of Kc were properly estimated by the FPM model; yet outdoor estimations were accurate in all treatments.}, keywords = {Evapotranspiration,Greenhouse,Crop coefficient,Stress coefficient,Microlysimeter}, title_fa = {ارزیابی روش FAO-56 در برآورد تبخیر- تعرق و ضرایب گیاهی بادنجان در شرایط گلخانه و مزرعه}, abstract_fa = {تحقیق حاضر، بر عملکرد روش پنمن-مانتیث فائو در برآورد تبخیر- تعرق بادنجان، ضرایب گیاهی و تنش آبی تحت سطوح مختلف کمبود آب و شوری، در گلخانه و مزرعه متمرکز شده است. مقادیر روزانه تبخیر- تعرق گیاه مرجع چمن و بادنجان از طریق توزین روزانه میکرولایسیمترها در طول فصل رشد تعیین گردید. روند تغییرات روزانه تبخیر-تعرق گیاه مرجع به خوبی در هر دو محیط برآورد گردید، هرچند در گلخانه برآوردها 12 درصد کمتر از مقدار واقعی بودند. بهترین برآوردهای مقادیر روزانه و میانگین 10 روزه تبخیر-تعرق بادنجاندر گلخانه و مزرعه، مربوط به تیمارهای آبیاری روزانه (I1) بوده‌اند. با توجه به ملایم شدن تغییرات روزانه داده‌های هواشناسی و رطوبت خاک،همبستگی بهتری میان مقادیر میانگین 10 روزه تبخیر-تعرق بادنجاناندازه‌گیری شده و محاسبه شده مشاهده گردید. در هر دو محیط، مقادیر ضریب تنشو دقت برآورد آنها با افزایش شدت تنش کاهش یافت. الگوی تغییرات روزانه ضریب گیاهی مشابه تبخیر-تعرق بادنجانبه‌دست آمد. برآوردهای مزرعه‌ای در تمامی تیمارها از دقت بالاتری برخوردار بودند.}, keywords_fa = {تبخیر-تعرق,گلخانه,ضریب گیاهی,ضریب تنش,میکرولایسیمتر}, url = {https://jise.scu.ac.ir/article_12112.html}, eprint = {https://jise.scu.ac.ir/article_12112_53656770675355ca8d4b78ef93601250.pdf} } @article { author = {Ashiri, Moustafa and Hooshmand, AbdolRahim and Broomand nasab, Saeid}, title = {Technical Evaluation of Drip Irrigation Systems (Case Study: Shahid Rajaayi Agro-Industry – Dezful)}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {79-88}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12113}, abstract = {     Correct and essential design is one of the important factors in development and improvement of pressurized irrigation systems. This research was performed using Miriam-keller method in order to investigate drip irrigation system implemented in Shahid Rajaayi Agro-Industry, Dezful. To do this, five systems were selected as a drip irrigation system. These systems were different in terms of lateral pipe layout and nominal discharge of drippers. Drippers used in these systems were compensating emitters with 2.2, 4 and 8 liters/hour flow rates and had parallel and pig-tail configurations. To evaluate irrigation systems, Christiansen uniformity coefficient, emission uniformity, potential efficiency of low quarter and actual efficiency of low quarter parameters were used. Mean values of the above parameters in the evaluated systems were obtained 95.12%, 91.68%, 82.91% and 91.2%, respectively. Among systems evaluated, system D from plot 110, with pig-tail lateral layout and 8 liter/hour drippers was selected as the best system in terms of measured parameters. values of uniformity coefficient, emission uniformity, potential efficiency of low quarter and actual efficiency of low quarter for this system were 98, 95.8, 86.22 and 95.8 percent, respectively. Values of emission uniformity obtained for the evaluated five systems were in "Perfect" class. Low difference of values of Potential Efficiency of Low Quarter and Actual Efficiency of Low Quarter indicates good management of these systems and suitable design of them.}, keywords = {Evaluation of drip irrigation,Emission uniformity,Uniformity coefficient,Dezful}, title_fa = {ارزیابی فنی سامانه‌های آبیاری قطره‌ای ( مطالعه موردی: کشت و صنعت شهید رجایی دزفول)}, abstract_fa = {     طراحی صحیح و اصولی یکی از عوامل مهم در توسعه و بهبود سامانه‌های آبیاری تحت ‌فشار است. این پژوهش با هدف ارزیابی سامانه آبیاری قطره‌ای اجرا شده در کشت و صنعت شهید رجایی شهرستان دزفول، با استفاده از روش مریام‌-‌کلر انجام گردید. برای این منظور تعداد پنج سامانه تحت پوشش سامانه آبیاری قطره‌ای انتخاب شد. این سامانه‌ها از نظر آرایش لوله فرعی و دبی اسمی قطره‌چکان‌ها باهم متفاوت بودند. قطره‌چکان‌های به‌کار رفته در این سامانه‌ها خودتنظیم‌کننده فشار با دبی2/2، 4 و 8 لیتر در ساعت با آرایش‌های دم‌خوکی و موازی بودند. برای ارزیابی سامانه‌های آبیاری، از پارامترهای ضریب یکنواختی کریستیانسن، راندمان یکنواختی پخش، راندمان پتانسیل کاربرد ربع پایین وراندمان واقعی کاربرد ربع پایین استفاده گردید. مقادیر متوسط پارامترهای فوق در سامانه‌های ارزیابی شده به ترتیب 12/95، 68/91، 91/82 و 2/91 درصد به‌دست آمد. از بین سامانه‌های ارزیابی شده، سامانه با آرایش دم‌خوکی و قطره‌چکان‌های 8 لیتر در ساعت به عنوان بهترین سامانه از لحاظ پارامترهای اندازه‌گیری شده، انتخاب شد. مقادیر ضریب یکنواختی کریستیانسن، راندمان یکنواختی پخش، راندمان پتانسیل کاربرد ربع پایین، راندمان واقعی کاربرد ربع پایین برای سامانه مذکور به ترتیب 98، 8/95، 22/86 و 8/95 درصد به‌دست آمد. مقادیر راندمان یکنواختی پخش به‌دست آمده برای هر پنج سامانه ارزیابی شده در رده "عالی" قرار داشتند. اختلاف کم مقادیر راندمان پتانسیل کاربرد ربع پایین و راندمان واقعی کاربرد ربع پایین نشان‌دهنده مدیریت خوب این سامانه‌ها و طراحی مناسب آن‌ها می‌باشد.}, keywords_fa = {ارزیابی آبیاری قطره‌ای,ضریب یکنواختی پخش,یکنواختی پخش,دزفول}, url = {https://jise.scu.ac.ir/article_12113.html}, eprint = {https://jise.scu.ac.ir/article_12113_2a3c49a84b7c6ce1cd57f9d2513a40b7.pdf} } @article { author = {Ahmadian far, Iman and Adib, Arash and Tghian, Mehrdad and haghighi, Ali}, title = {Optimization Operation from Storage Dams Using Non-Dominated Sorting Genetic Algorithm}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {89-100}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12114}, abstract = {     To derive optimal operation policies from multi-reservoir systems, applying the conflict multiple goals simultaneously is very important. In order to, this paper presents a multi-objective optimization-simulation model, which is consist of agriculture and minimum flow goals in a three dam water resources system. For this purpose, a discrete hedging rule with a non-dominated sorting genetic algorithm has been coupled to minimize the modified shortage index over a series of hydrological record of 48 years. The evaluation metrics are diversity metric and standard deviation, which obtained values of each are equal to 0.357 and 0.0111 respectively. The results show the efficient performance of this algorithm to obtain Pareto frontier. Also, multi-objective algorithms present a set of optimum solutions for users instead of a solution, thus it helps to make decision in supplying the conflict goals of agriculture and minimum flow in different and complicate operation conditions such as drought periods easily.}, keywords = {Multi-reservoir and multi-purpose,Non-dominated sorting genetic algorithm,Rule curve}, title_fa = {بهینه سازی بهره برداری از سدهای مخزنی با استفاده از الگوریتم ژنتیک چند هدفه با رویکرد مرتب سازی نامغلوب}, abstract_fa = {برای استخراجسیاست­هایبهینهبهرهبرداری ازسیستم­های چند مخزنه،اعمال اهدافچندگانهمتضاد بهصورتهمزمان،از اهمیتبسیاربالاییبرخورداراست.دراینراستا، بهارائهیکمدلبهینه­سازیچندهدفهشاملاهدافکشاورزی و زیست محیطیدر یک سیستم  سه سدی منابع آب پرداخته شده است. بدین منظور از تلفیق مدل شبیه ساز سیاست بهره برداری جیره بندی گسسته ومدلبهینه­سازیالگوریتم ﮊنتیک چند هدفه با رویکرد مرتب سازی نامغلوب، استفاده شده است تا شاخص کمبود آب برای تامین اهداف مورد نظر را در طول دوره آماری 48 ساله آبدهی کاهش دهد. معیارهای ارزیابی الگوریتم بهینه ساز شامل شاخص متوسط فاصله بین نقاط و انحراف معیار نقاط جبهه نامغلوب می باشند که با توجه به محاسبات انجام شده مقادیر هر یک به ترتیب معادل 357/0 و 0111/0 به دست آمد. این نتایج بیانگر کارایی مؤثر این الگوریتم در به دست آوردن جبهه جواب نامغلوب می باشد. همچنین الگوریتم­های چند هدفه، مجموعه­ای از جواب های بهینه را به جای یک جواب در اختیار کاربر قرار می­دهند، بنابراین به سهولت تصمیم گیری در مورد نحوه تأمین آب اهداف متضاد کشاورزی و زیست محیطی در شرایط مختلف و پیچیده بهره برداری از جمله شرایط خشکسالی کمک می نماید.}, keywords_fa = {سیستم چند مخزنه و چند منظوره,الگوریتم بهینه ساز ژنتیک چند هدفه,منحنی فرمان}, url = {https://jise.scu.ac.ir/article_12114.html}, eprint = {https://jise.scu.ac.ir/article_12114_3dc494f9957444d08f20fde2fc218131.pdf} } @article { author = {Shokouhi far, Marzieh and Broomand nasab, Saeid and Soltani Mohammadi, Amir and Hooshmand, Abdol rahim}, title = {The Effect of Salinity of Irrigation Water and Super Absorbent Polymer on Some Hydraulic and Physical Properties of Sandy Loam Soil}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {101-113}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12115}, abstract = {     Since the agriculture field is the main water consumer, using techniques in order to increasing water use efficiency is necessary. Applying super absorbent polymer (SAP) could be a method to reduce consuming water in Iran.  Another method to counter water crisis is using unconventional water in agriculture, which in this terms the study of physical and chemical changes of soil properties is important. This study with the aims of the effects of super absorbent polymer and salinity of irrigation water on available water, soil porosity and saturation hydraulic conductivity was done at the Water Engineering Faculty of Shahid Chamran University of Ahvaz. This research performed in two independent experiments with three replications according to a randomized complete block design with factorial layout in three levels of salinity irrigation water, two kinds of SAP, Iranian and French, each with three levels in winter and spring of 2014. The levels of using SAP included 0, 3 and 6 g SAP per kilogram soil (0, 0.3, 0.6 weight percentage) and treatment of salinity of irrigation included 2.6, 4, 6 dS/m. After two months irrigation under salinity water treatment, sampling to determine available water, soil porosity and saturation hydraulic conductivity was done. The results showed that increasing SAP increased available water and soil porosity and decreased saturation hydraulic conductivity significantly. Increasing of water salinity decreased available water and soil porosity at 5% significantly. The iranian polymer and the french polymer lead to raise water ability 1.45 and 1.96 times and increased porosity 33.61 and 40.75 percent more than the sample without polymer.}, keywords = {Porosity,Water holding capacity,Super absorbent,Salinity,Saturation hydraulic conductivity}, title_fa = {بررسی اثر شوری آب آبیاری و سوپر جاذب بر بعضی خصوصیات هیدرولیکی و فیزیکی خاک لوم شنی}, abstract_fa = {     از آنجایی که بخش کشاورزی عمده‌ترین مصرف‌کننده‌ی منابع محدود آبی کشور است، به کارگیری روش‌هایی به منظور افزایش راندمان کاربرد آب در این بخش امری ضروری است. استفاده از پلیمرهای سوپر جاذب می‌تواند راهکاری مناسب برای صرفه‌جویی در مصرف آب در شرایط کنونی کشور باشد. از دیگر راهکارهای مقابله با بحران آب استفاده از آب‌های نامتعارف در کشاورزی می‌باشد که در این شرایط بررسی تغییرات خواص فیزیکی و شیمیایی خاک حائز اهمیت است. پژوهش حاضر با هدف بررسی اثر کاربرد توأمان شوری آب آبیاری و سوپر جاذب و بر ظرفیت نگهداشت آب در خاک، تخلخل و هدایت هیدرولیکی اشباع در دانشکده مهندسی علوم آب دانشگاه شهید چمران اهواز انجام شد. مدل آماری طرح به‌صورت فاکتوریل در قالب طرح بلوک‌ کامل تصادفی بود که در سه تکرار، سه تیمار شوری آب آبیاری، دو نوع سوپر جاذب ایرانی و فرانسوی هر کدام در سه سطح و به‌صورت دو آزمایش مستقل در زمستان 1392 و بهار 1393 اجرا شد. سطح استفاده از پلیمرها شامل سه سطح 0، 3 و 6 گرم پلیمر در هر کیلوگرم خاک (0، 3/0 و 6/0 درصد وزنی) و تیمارهای شوری آب آبیاری شامل 6/2، 4 و 6 دسی زیمنس بر متر بود. پس از دو ماه آبیاری تحت تیمارهای کیفیت آب، نمونه‌ برداری به منظور انجام آزمایش‌ها صورت گرفت. نتایج نشان داد افزایش سطح کاربرد سوپر جاذب موجب افزایش معنی‌دار آب قابل استفاده گیاه و تخلخل شد در حالی که هدایت هیدرولیکی کاهش یافت. همچنین افزایش شوری موجب کاهش تخلخل خاک، آب قابل استفاده گیاه و هدایت هیدرولیکی اشباع شد. پلیمر سوپر جاذب ایرانی و فرانسوی آب قابل استفاده را 45/1 و 96/1 برابر و تخلخل را  61/33 درصد و 75/40 درصد نسبت به نمونه بدون پلیمر افزایش داد.}, keywords_fa = {تخلخل,ظرفیت نگهداشت,سوپر جاذب,شوری,هدایت هیدرولیکی اشباع}, url = {https://jise.scu.ac.ir/article_12115.html}, eprint = {https://jise.scu.ac.ir/article_12115_db825f4a6570de7b1e6d7474022f9a8c.pdf} } @article { author = {Nakhaee, Mahmoud and Hashemi, Reza and Khashee Sivaki, Abbas and Ahmadi, Mohsen}, title = {Optimization of Crop Pattern Using Analytical Hierarchy Process and Linear Programming (Case Study: Plain Birjand)}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {115-124}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12116}, abstract = {     It is necessary to optimize the use of water resources in arid and semi-arid of world because of limited water resources, low performance efficiency, increasing population and demand for water. Suitable cropping patterns are very effective and efficient method for use of water. Due to limited water resources in Birjand plain, this research was conducted to optimization of crop pattern in the plain. For this purpose, crop pattern in Birjand plain (A) and 8 common crop patterns were studied. The method of multi-criteria decision analytic hierarchy process and LINGO programming model used to determine the best cropping pattern. Economic and social measures used to maximize net income, employment and labor and minimizing water consumption, cost and virtual water in both model. Results showed that profit and water is factor that is more important other than to determine crop pattern. Results show that saffron, cumin, barley, wheat, summer crops, vegetables, sugar beet, forage plant and cotton are the highest priority for cultivation. AHP results showed that 8, 2 and 4 models were determined the best cropping patterns so that in these models the forage plant (21.12%), wheat (36.74%) and wheat (46.76%) had the highest cultivation area, respectively. Model 8 due to had a low coefficient of determination (R2) in LINGO so this model is inappropriate. The cultivated wheat and vegetable in models 2 and 4 increased than cropping patterns prevalent in the region. Cucurbit plants, saffron, cotton and barley in Model 2 increased compared to the current model, while Model 4 decreased. Cumin decreased in model 2 but increased in model 4. Cultivation of forage plant and sugar beet in both models reduced compared to the current crop pattern.  }, keywords = {Optimization,Crop pattern,Birjand Plain,Linear programming}, title_fa = {بهینه‌سازی الگوی کشت با استفاده از فرآیند تحلیل سلسله مراتبی و برنامه‌ریزی خطی(مطالعه موردی: دشت بیرجند)}, abstract_fa = {     محدودیت منابع آب، عملکرد پایین بهره­وری، افزایش جمعیت و نیاز روزافزون به این منبع حیاتی لزوم برنامه­ریزی مناسب به منظور استفاده بهینه از منابع آب را در مناطق خشک و نیمه خشک جهان نمایان می­سازد. الگوهای کشت مناسب، روشی بسیار مؤثر و اساسی برای استفاده بهینه از آب است. با توجه به محدودیت منابع آبی در دشت بیرجند، این تحقیق برای بهینه‌‌سازی الگوی کشت در این دشت انجام شد. بدین منظور، الگوی کشت رایج در دشت بیرجند (A) و هشت الگوی کشت رایج در سایر دشت‌های خراسان به عنوان الگوهای پایه مورد بررسی قرار گرفتند. در این تحقیق از روش تصمیم‌گیری چند معیاره‌ی فرایند تحلیل سلسله مراتبی و مدل برنامه‌ریزی لینگو برای تعیین بهترین الگوی کشت استفاده شد. در هر دو مدل از معیارهای اقتصادی و اجتماعی برای حداکثر کردن درآمد خالص، اشتغال و نیروی کار و حداقل کردن آب مصرفی، هزینه، و مقدارآب مجازی صادراتی استفاده شد. نتایج نشان داد که معیارهای سود و آب مصرفی نسبت به سایر عوامل از اهمیت بیشتری در تعیین رتبه‌بندی محصولات و نوع­کشت برخوردار می­باشند. نتایج نشان داد که گیاهان زعفران، زیره، جو، گندم، صیفی‌جات، سبزیجات، چغندرقند، نباتات علوفه‌ای و پنبه به ترتیب بیشترین اولویت را برای کشت داشتند. با توجه به این نتایج و براساس الگوهای کشت رایج در منطقه، هشت الگوی کشت پیشنهاد شد. نتایج مدل تحلیل سلسله مراتبی نشان داد که الگوهای هشت، دو و چهار به عنوان الگوهای مناسبی می‌باشند که در این الگوها به ترتیب نباتات علوفه‌ای (12/21 درصد)، گندم (74/36 درصد) و گندم (76/46 درصد) بیشترین سطح زیر کشت را داشتند. با توجه به بهینه‌یابی در مدل LINGO مدل 8 به علت دارا بودن پایین‌ترین ضریب تعیین (R2) نامناسب می‌باشد. در الگوهای 2 و 4 سطح زیر کشت گندم و سبزیجات نسبت به الگوی کشت رایج در منطقه افزایش نشان داد. گیاهان جالیزی، زعفران، پنبه و جو در الگوی دو نسبت به الگوی رایج منطقه افزایش داشت در حالی که در الگوی چهار کاهش یافت. زیره در الگوی دوم کاهش نشان داد ولی در الگوی چهار افزایش یافت. سطح زیر کشت نباتات علوفه‌ای و چغندرقند در هر دو الگوی کشت نسبت به وضعیت فعلی منطقه کاهش نشان داد.}, keywords_fa = {بهینه‌یابی,الگوی کشت,دشت بیرجند,برنامه‌ریزی خطی}, url = {https://jise.scu.ac.ir/article_12116.html}, eprint = {https://jise.scu.ac.ir/article_12116_b6514b200991a3ce0cea0c3cdac20108.pdf} } @article { author = {Ghorbani, Mohammad Ali and Dehghani, Reza}, title = {Application of Bayesian Neural Networks, Support Vector Machines and Gene Expression Programming Analysis of Rainfall - Runoff Monthly (Case Study: Kakarza River)}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {125-138}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12117}, abstract = {Simulation of rainfall - runoff process is one of the most important tasks in water resources management and flood control studies. In this study, the rainfall – runoff process over Kakarza river located at Lorestan province, was simulated using the Bayesian neural network and the results were compared with the gene expression and support vector machine models.  In this case, different combinations of monthly rainfall and runoff data in period of 1969-2013 were considered as the input data of the models. Four performance criteria namely, correlation coefficient, root mean square error, Nash-Sutcliff coefficient and bias were used to evaluate and compare the performance of the models. The results showed that the performance of the models were satisfactory. Results showed that, the Bayesian neural network model is more efficient than the other models in estimation of minimum, mean and peak of runoff .}, keywords = {Rainfall-Runoff,Bayesian neural network,Gene Expression programming,Support vector machine}, title_fa = {کاربرد شبکه‌های عصبی بیزین، ماشین بردار پشتیبان و برنامه‌ریزی بیان ژنی در تحلیل بارش – رواناب ماهانه (مطالعه موردی:رودخانه کاکارضا)}, abstract_fa = {     شبیه‌سازی فرآیند بارش - رواناب اولین و مهمترین گام برای کنترل سیلاب در مدیریت منابع آب می‌باشد. در این تحقیق  فرآیند بارش – رواناب  ماهانه رودخانه کاکارضا واقع در استان لرستان، با استفاده از شبکه عصبی بیزین موردبررسی قرار گرفت و نتایج آن با روش‌های برنامه‌ریزی بیان ژن و ماشین بردار پشتیبان مقایسه گردید. بر این اساس ترکیب‌های مختلفیبا استفاده از پارامترهای بارندگی و رواناب، طی دوره آماری (1392-1348) به‌عنوان ورودی برای تخمین روانابدر مقیاس زمانی ماهانه مورد ارزیابی قرار گرفت. معیارهای ضریب همبستگی، ریشه میانگین مربعات خطا، ضریب نش ساتکلیف و بایاس برای ارزیابی و نیز مقایسه عملکرد روش‌ها مورداستفاده قرار گرفت. نتایج حاصله نشان داد ساختارهای ترکیبی با استفاده از روش‌هایهوشمند موردبررسی، در شبیه‌سازی فرآیند بارش – رواناب نتایج قابل قبولی ارائه می‌نماید. مقایسه مدل‌ها نشان داد شبکه عصبی بیزین عملکرد بهتری نسبت به سایر مدل‌ها در شبیه‌سازی فرآیند بارش-رواناب دارد. درمجموع روش شبکه عصبی بیزین توانایی بالایی در تخمین مقادیر کمینه، میانی و مقادیر بیشینه رواناب از خود نشان داده است.}, keywords_fa = {بارش - رواناب,شبکه عصبی بیزین,برنامه‌ریزی بیان ژن,ماشین بردار پشتیبان}, url = {https://jise.scu.ac.ir/article_12117.html}, eprint = {https://jise.scu.ac.ir/article_12117_6535b2716c557a30e6df7879c8ef491b.pdf} } @article { author = {Malki, Abbas and Alinezhadian Bidabadi, Afsaneh}, title = {The Effect of Different Levels of Municipal Effluent Irrigation on Maize Water Use Efficiency and Yield}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {139-148}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12118}, abstract = {     The main challenge facing the agriculture sector is producing more food while using less water so it is needed to increase water use efficiency and optimal use of water resources, especially in arid areas. The main goal of this research is to study the effect of irrigation with municipal wastewater effluent and water use efficiency of maize in farms located in south- west of Shahr-e-kord. All of treatments were used in randomized complete block design with split plots and three applications with five factors including 100% well water (M1), 25% wastewater + 75% well water (M2), 50% wastewater + 50% well water (M3), 75% wastewater + 25% well water and 100 % wastewater (M5) and four sub treatment factors according to the different amounts of water, wastewater and mixture of water and wastewater on the basis of water requirements (50% (L1), 65% (L2), 85% (L3) and 100% (L4)). In the different treatment types of water, M4 (25%well water and 75% wastewater) had dry matter yield. Regarding to total dry matter, the yield of biomass, grain and water use efficiency were more in M4 treatment and the less water use efficiency was determined in 100% wastewater treatment (M5). In different amounts of water treatments on the basis of total dry matter, the most total dry matter yield, biomass, grain and water use efficiency were determined in 100% crop water requirement treatment (L4). On the basis of biomass yield, 85% crop water requirement treatment (L3) had more water use efficiency. The results show that for total dry matter, biomass and grain yield 75% wastewater + 25% well water was the best treatment in irrigation of considered area. On the other hand, wastewater contains nutrients and can be used without fertilizer consumption in this area, so it is useful in saving water and fertilizer.}, keywords = {Municipal,Wastewater,Maize yield,Maize water use efficiency,Total dry matter}, title_fa = {اثر آبیاری با سطوح مختلف پساب شهری بر کارآیی مصرف آب و عملکرد ذرت}, abstract_fa = {     از آنجا که چالش بزرگ بخش کشاورزی تولید غذای بیشتر از آب کمتر است که با افزایش کارآیی مصرف آب دست یافتنی است، نیاز به افزایش کارآیی مصرف آب و استفاده‌ی صحیح از منابع آبی مخصوصاً در نواحی خشک ضروری می‌باشد. تحقیق حاضر با هدف تأثیرآبیاری با پساب شهری بر عملکرد و کارآیی مصرف آب ذرت، در اراضی کشاورزی جنوب غرب شهرکرد در قالب کرت‌های خرد شده با طرح پایه بلوک‌های کامل تصادفی با پنج فاکتور اصلی (100 درصد آب چاه (M1)، 25 درصد پساب + 75 درصد آب چاه (M2)، 50 درصد آب چاه + 50 درصد پساب (M3)، 75 درصد پساب و 25 درصد آب چاه (M4) و 100 درصد پساب (M5)) و چهار فاکتور فرعی (سطوح مختلف کاربرد آب، پساب و یا نسبت‌های اختلاط آب و پساب با نیاز آبی مختلف (50 (L1)، 65 (L2)، 85 (L3) و 100 (L4) درصد نیاز آبی در سه تکرار اجرا گردید.در تیمارهای نوع آب، تیمار 25 درصد آب چاه + 75 درصد پساب (M4) بیشترین عملکرد کل ماده خشک را نشان داد.عملکرد بیوماس، دانه و کارآیی مصرف آب بر اساس کل ماده‌ی خشک نیز در تیمار M4 (تیمار 25 درصد آب چاه + 75 درصد پساب) بیشترین مقدار را داشت و کمترین کارآیی مصرف آب بر اساس کل ماده خشک در تیمار 100 درصد پساب (M5) به دست آمد. در تیمارهای مقادیر مختلف آب، بیشترین عملکرد ماده خشک، بیوماس، دانه و کارآیی مصرف آب بر اساس عملکرد کل ماده خشک در تیمار 100 درصد نیاز آبی گیاه (L4) بدست آمد و تیمار 85 درصد نیاز آبی گیاه (L3) بیشترین کارآیی مصرف آب را بر اساس عملکرد بیوماس نشان داد. با توجه به نتایج، از نظر میزان کل ماده خشک، بیوماس و عملکرد دانه، تیمار 75 درصد پساب با 25 درصد آب چاه مناسب‌ترین اختلاط آب معمول آبیاری و پساب شهری برای آبیاری در منطقه‌ی مورد مطالعه را نشان داد. ازطرفی به علت دارا بودن عناصر غذایی در پساب و در شرایط کنونی کم آبی حاکم در کشور حتی بدون مصرف کود می‌توان از پساب در این منطقه استفاده و در مصرف آب و کود صرفه‌جویی نمود.}, keywords_fa = {پساب شهری,عملکرد ذرت,کارآیی مصرف آب ذرت,کل ماده خشک}, url = {https://jise.scu.ac.ir/article_12118.html}, eprint = {https://jise.scu.ac.ir/article_12118_4fd51d2a5db709866c09b6202113922d.pdf} } @article { author = {Ahmadi Moghadam, Zeynab and Ghorbani, Behzad and Nouri Emamzadei, Mohammad Reza}, title = {The Effects of Different Mulches on Temporal Changes on The Some Soil Physical Properties}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {149-158}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12119}, abstract = {     Application of mulches not only affects the physical and chemical properties of soil, but improves infiltration maintenance. In this study, evaluated during four month, the effects of wheat straw, maize straw, sawdust, leaves and superab A200 on the soil physical properties including soil bulk density, capacity water in the soil and cumulative infiltration. The effects of mulch compared in both cases tillage  and no tillage, under modle complete block randomized design experiment with split plot in time. Results showed  Mulch reduces bulk density but over time, bulk density in all mulchs except of superab A200, were increasing. Use mulch experiments increased water-holding capacity of the soil. In case tillage treatments, wheat straw and in case no tillage treatments superab A200 increasing water-holding capacity. After time increase cumulative infiltration  in the wheat straw, maize straw and superab A200 significantly, compared to sawdust and leave mulches.}, keywords = {bulk density,Tillage,Water holding capacity,Mulch,Infiltration}, title_fa = {تأثیر زمانی‌چند مالچ‌‌ روی خصوصیات فیزیکی خاک}, abstract_fa = {مالچ‌ها‌ نه تنها بر خصوصیات فیزیکی و شیمیایی خاک تأثیر‌گذار می‌باشند بلکه میزان نفوذپذیری‌ را نیز بهبود می‌بخشند. در این تحقیق تأثیر بقایای گندم، ذرت، خاک اره، برگ و سوپرجاذب A200 بر خصوصیات فیزیکی خاک شامل جرم مخصوص ظاهری، ظرفیت نگهداری آب و نفوذ آب به خاک در مدت چهار‌ ماه بررسی شد. تأثیر مالچ‌ها در حالت خاک‌ورزی و بدون خاک‌ورزی در قالب طرح بلوک‌های تصادفی و آزمون اسپلیت پلات در زمان مطالعه گردید. نتایج تحقیق نشان داد مالچ‌ها سبب کاهش جرم مخصوص ظاهری خاک ‌می‌شوند و با گذر زمان مقدار آن به جز در تیمار سوپرجاذب  A200روند افزایشی دارد. مالچ‌ها سبب افزایش ظرفیت نگهداری آب خاک گردیدند، بیشترین میزان آن در حالت بدون خاک‌ورزی در تیمار کاه وکلش‌گندم و در حالت خاک‌ورزی در تیمار سوپرجاذب گردید. کاه و کلش گندم، ذرت، و سوپرجاذب A200موجب افزایش معنی‌دار نفوذ با گذر زمان نسبت به مالچ‌‌های خاک‌اره و برگ‌درخت شدند.}, keywords_fa = {جرم مخصوص ظاهری خاک,خاک‌ورزی,ظرفیت نگهداری آب خاک,مالچ,نفوذ}, url = {https://jise.scu.ac.ir/article_12119.html}, eprint = {https://jise.scu.ac.ir/article_12119_eb4e05e7fb5402a3eeaa8a26f697ddb9.pdf} } @article { author = {Aghebati, Behrooz and Bazargan, Jalal}, title = {Numerical Simulation of Roll Waves in Chutes}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {159-166}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12120}, abstract = {     Chutes are one type of the many hydraulic structures that cause in the formation of the waves and turbulence in the free surface of flow through super critical flow. In this study by the fluent software and by using volume of fluid model and PISO algorithm, the formation of the rolling waves in the physical model of azad damweirand numerical models have been considered. For this purpose, flow depth and weave heightare calculated along the chutes length for different discharges, widths and longitudinal slopes of the chute.The results indicate that roughness of the bed and walls impede the formation of the rolling wave, also the rolling waves are expected to be generated for sections of the chute whenweave height tohydraulic depth ratio in that section is above 0.57.}, keywords = {Roll wave,PISO algorithm,Chute,Fluent,Volume of fluid model}, title_fa = {شبیه‌سازی عددی امواج غلتان در تنداب‌ها}, abstract_fa = {تنداب­ها یکی از انواع سازه­های هیدرولیکی می­باشند که به واسطه جریان فوق­بحرانی باعث ایجاد امواج غلتان و آشفتگی در سطح آزاد جریان می­شود. در این تحقیق به وسیله نرم­افزار فلوئنت و با استفاده از مدل حجم سیال و الگوریتم­ پیزو، شکل­گیری امواج غلتان در مدل فیزیکی سرریز سد آزادو مدل­های عددی بررسی شده است. برای این منظور عمق جریان و ارتفاع موج در نقاط متفاوتی از طول تنداب­ها به ازای دبی­های ورودی مختلف و عرض­ها و شیب­های طولی مختلف به­دست آمد.نتایج حاصل نشان داد که زبری کف و دیواره­ها نقش به سزایی در جلوگیری از تشکیل امواج غلتان دارد، همچنین برای مقاطعی از تنداب که نسبت ارتفاع موج  به عمق جریاندر آن مقطع بیشتر از 57/0 باشد، باید انتظار تشکیل امواج غلتان را داشت.}, keywords_fa = {امواج غلتان,الگوریتم پیزو,تنداب,فلوئنت,مدل حجم سیال}, url = {https://jise.scu.ac.ir/article_12120.html}, eprint = {https://jise.scu.ac.ir/article_12120_8a26f76e431b0954cca86320ac2ba312.pdf} } @article { author = {Asadi, Mojtaba and Zomorodian, Seyed Mohammad Ali}, title = {Numerical Simulation of Turbulent Flow and Local Scouring Around of Spur Dike Straight and Angles by FLOW-3D}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {167-179}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2016.12121}, abstract = {     Examining the properties and behavior of the flow in the rivers and its associated structures is one of complex phenomena that make the use of software inevitable. First, the results of laboratory test carried out by Duan et al. (2009) in Minnesota university, are used verification and comparison of numerical simulations of FLOW-3D(version 9.3). The vertical spur dike was first simulated to verify the model results and the inclined spur dike with 60° and 30° to the flow direction was then considered. The simulation performed with FLOW-3D, for 650 seconds using turbulence models (k-ɛ, RNG, LES). By comparing different turbulence models with experimental results, the maximum scour depth at the tip of the spur dike was 8.82 cm. Then the maximum scour depth calculated by FLOW-3D in the turbulence models of (k-ɛ, RNG, LES) was 9.1, 8.9, 9.1 cm. So the error in RNG turbulence model is about 9 %, compare to the turbulence model k-ɛ, and of LES shows more agreement. In the simulation, the maximum scour depth at the tip of the spur dike 60° and 30° was 8.75 and 6.5 cm respectively.}, keywords = {Spur Dike,Scouring,Turbulence model,Flow-3D}, title_fa = {شبیه‌سازی عددی الگوی جریان متلاطم و آبشستگی موضعی بستر در اطراف آبشکن‌ قائم و زاویه دار با مدل عددیFLOW-3D}, abstract_fa = {بررسیخصوصیاتورفتارجریاندررودخانههاوسازههایمرتبطباآنازپدیدههایپیچیدهاستکهاستفادهاز نرمافزارراامریاجتنابناپذیرمینماید. در ابتدا از نتایج مدل آزمایشگاهی ارائه شده توسط دوان و همکاران (2009) در آزمایشگاه مینیسوتا آمریکا برای صحت سنجی نرم افزار FLOW-3D نسخه 9.3 و مقایسه نتایج عددی شبیه سازی شده استفاده شده، در ادامه آبشکن مایل با زوایای 60 و 30 درجه نسبت به جهت جریان مورد بررسی قرار گرفت. شبیه سازی ها با نرم افزارFLOW-3D، به مدت650 ثانیه و با استفاده از مدل های آشفتگی دو معادله ای استاندارد،گروه نرمال شده و شبیه سازی گردابه های بزرگ انجام شد.با مقایسه مدل­های مختلف آشفتگی و نتایج آزمایشگاهی، حداکثر عمق آبشستگی در نوک آبشکن با زاویه 90 درجه در شرایط آزمایشگاه 82/8 سانتی متر و با استفاده از نرم افزار FLOW-3D ، حداکثر عمق آبشستگی در مدل های آشفتگی دو معادله ای استاندارد،گروه نرمال شده و شبیه سازی گردابه های بزرگ به ترتیب 1/9 ، 9/8 و 1/9 سانتی متر حاصل گردید که مدل آشفتگی دومعادله ای  گروه نرمال شده  تقریبا با 9 درصد خطا، نسبت به دو مدل آشفتگی دو معادله ای استاندارد وشبیه سازی گردابه های بزرگمطابقت بهتری را نشان داد. همچنین در شبیه سازی  مربوط به آبشکن 60 و 30 درجه حداکثر عمق آبشستگی در نوک آبشکن ها به ترتیب 75/8 و 5/6 سانتی متر بود.}, keywords_fa = {آبشکن,آبشستگی,مدل آشفتگی,Flow-3D}, url = {https://jise.scu.ac.ir/article_12121.html}, eprint = {https://jise.scu.ac.ir/article_12121_13f8f7251fc2f8afbb457cb9b3f2bafa.pdf} } @article { author = {Lashkar-Ara, Babak and دهقانی, ایراندخت and ذاکرمشفق, محمد}, title = {Interaction of Erosion Parameter and Scour Pattern in the Plunge Pool}, journal = {Irrigation Sciences and Engineering}, volume = {39}, number = {2}, pages = {181-193}, year = {2016}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2015.14376}, abstract = {Experimental results of determining scour hole dimensions resulted from submerged circular jet in a plunge pool containing non-cohesive materials are presented in this paper. The effect of nozzle flow velocity, the height of nozzle installation and the bed particle diameters, are evaluated toward this end. Non-cohesive materials with average diameter of 4.06, 7.14, and 8.73 mm are used in this study. The elevation of jet installation toward the surface of plunge pool bed is changed with the values of 24, 35.5 and 44 cm. The nozzle flow velocity was differentiated between 2 and 10 meter per second. The comparison of observed results with previous studies show that the erosion parameter absolutely unable to normalized the effect of particle diameters, jet installation effect and nozzle flow velocity on the relative scour dimensions. The sensitive analysis on general introduced relations in this paper indicates that the variations of flow velocity and jet installation elevations has a double effect on estimating scour hole dimension in comparison to the material size and grading variations. The results also showed that armoring of the plunge bed has an important role in estimating relative parameters of scouring.}, keywords = {Submerged circular jet,Material diameters,Jet depth,Erosion parameter,Scour hole dimensions}, title_fa = {اندرکنش پارامتر فرسایش و الگوی آبشستگی در حوضچه استغراق}, abstract_fa = {در این مقاله نتایج مطالعه آزمایشگاهی تعیین ابعاد حفره آبشستگی حاصل از جت دایره‌ای مستغرق در حوضچه‌های استغراق با مصالح غیر چسبنده ارائه شده است. برای این منظور اثر پارامترهای سرعت جریان خروجی از نازل، ارتفاع نصب نازل و اندازه قطر ذرات بستر مورد ارزیابی قرار گرفته است. در این تحقیق از مصالح غیر چسبنده با متوسط قطر 4/06، 7/14 و 8/73 میلی متر استفاده شده است. رقوم نصب جت نسبت به سطح تسطیح شده مصالح کف حوضچه استغراق، ارتفاع‌های 24 ، 35/5و 44 سانتی‌متر را تجربه نموده است. سرعت جریان خروجی از نازل حدودا بین دو الی ده متر بر ثانیه تغییر یافته است. مقایسه نتایج مشاهداتی این تحقیق با محققین پیشین گویای این مطلب است که پارامتر فرسایش به‌طور مطلق قادر به نرمال سازی اثر قطر مصالح، رقوم نصب جت و سرعت جت خروجی از نازل بر ابعاد نسبی حفره آبشستگی نمی‌باشد. تحلیل حساسیت صورت گرفته بر روابط عمومی معرفی شده در این تحقیق حاکی از آن است که تغییرات سرعت جریان و رقوم نصب جت در مقابل تغییر دانه بندی مصالح در تخمین ابعاد حفره آبشستگی از اثری دوچندان برخوردار است. همچنین نتایج نشان داد که جوشنی شدن بستر حوضچه استغراق نقش به سزایی در تخمین پارامترهای نسبی آبشستگی ایفا می‌نماید.}, keywords_fa = {جت دایره‌ای مستغرق,قطر مصالح,عمق جت,پارامتر فرسایش,ابعاد چاله آبشستگی}, url = {https://jise.scu.ac.ir/article_14376.html}, eprint = {https://jise.scu.ac.ir/article_14376_ea3b1a8c640b8971e55ed02531b43b96.pdf} }