@article { author = {Zahiri, Javad and Kashefipour, Seyed Mahmood}, title = {Predicting maximum scour depth around bridge abutment using M5 model}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {1-16}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13543}, abstract = {Scour around piers and abutments leads to a lot of bridge failures. Scouring around the bridge piers and abutments is one of the most important factors in bridge failure which happens over time and increases during floods, probably causing general damage to the bridge. Accordingly, the accurate estimation of scouring around the bridge piers and abutments can help engineers to take steps to deal with bridge destructions. Recently, data-driven models have been used widely to estimate the scour depth around bridge piers and abutments. Najafzadeh, Barani and Hessami-Kermani (2015) used a set of data-driven models such as the gravitational search algorithm and the particle swarm optimization algorithm to estimate the scour around bridge abutments. Sediment particles size, geometric characteristics of bridge abutment and approach flow conditions were considered as effective parameters on scouring mechanism. The results of this research showed that data-driven models can estimate the scour depth with high accuracy. In the present study, M5 tree model has been used to predict maximum scour depth around bridge abutment. High accuracy, simplicity and understandability are considered the advantages of this algorithm. A huge amount of data from credible references have been used to build and validate the tree model.}, keywords = {bridge abutment,M5 model,Pruning,Flow depth-abutment length,Sensitivity analysis}, title_fa = {بررسی کارآیی الگوریتم M5 در محاسبه حداکثر عمق چاله آبشستگی اطراف تکیهگاه پل}, abstract_fa = {آبشستگی صورت گرفته در اطراف تکیهگاهها و پایهها پدیدهای است که منجر به تخریب تعداد زیادی از پلها گردیده است. در این تحقیق برای شبیهسازی حداکثر عمق چاله آبشستگی اطراف تکیه­گاه پل از الگوریتم درختی M5 استفاده شده است. از مزایای این الگوریتم دقت بالا، سادگی و قابل فهم بودن آن است. برای ساخت و آموزش مدل از اطلاعات آزمایشگاهی منابع معتبر استفاده شد. پارامترهای مورد استفاده برای برآورد عمق آبشستگی اطراف تکیهگاه شامل فاکتور شکل و طول تکیهگاه، عمق و سرعت جریان و اندازه متوسط رسوبات بستر بوده است که به­صورت عدد فرود ذره، ضریب شکل تکیهگاه، ضریب عمق– طول تکیهگاه و ضریب شدت جریان به مدل درختی معرفی شدند. در مدل ساخته شده توسط الگوریتم M5 و پس از عملیات هرس کردن، ضریب عمق– طول تکیهگاه و ضریب شدت جریان بیشترین کاربرد را در ساختار درختی داشته و باعث تقسیم فضای مسأله به سه زیردامنه متمایز و ارائه رابطه رگرسیونی برای هر زیردامنه گشته است. برای بررسی کارآیی مدل درختی از تحلیل­های آماری متفاوت و مقایسه آن با معادلات ارائه شده توسط محققین مختلف استفاده شد. نتیجه این مقایسه نشاندهنده کارآیی بالای الگوریتم M5 در محاسبه عمق آبشستگی میباشد. برای بررسی اهمیت هر کدام از پارامترهای ورودی بر میزان آبشستگی از تحلیل حساسیت استفاده گردید. بر این اساس ضریب عمق– طول تکیهگاه بیشترین تأثیر را بر میزان آبشستگی داشته و حذف این پارامتر از مدل درختی باعث افزایش مجموع مربعات خطا از 37/4 به 41/19 گشته است.}, keywords_fa = {تکیهگاه پل,الگوریتم M5,هرس کردن,ضریب عمق-طول تکیهگاه,تحلیل حساسیت}, url = {https://jise.scu.ac.ir/article_13543.html}, eprint = {https://jise.scu.ac.ir/article_13543_70e5b7b9c44915ca2db43dae1deb59b6.pdf} } @article { author = {Gholami, Zeynab and Ebrahimian, Hamed and Noory, Hamideh}, title = {Prioritization of Major Agricultural Crops Cultivation Considering the Energy and Water Costs in Qazvin Plain}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {17-30}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13447}, abstract = {Limited water resources and energy, low yield utilization of irrigation networks, increasing population and a growing need for these vital resources reveal the necessity of proper planning for optimum use of water resources. The cropping pattern has a major role in the design of irrigation and drainage networks. Ziaei et al. (2015) compared energy productivity of different crops (wheat and barley) in Sistan and Baluchestan province in Iran. Results showed that the amount of energy productivity for wheat and barley fields were 0.056 and 0.066, respectively. Barley production was more efficient from various aspects of energy consumption rather than wheat in the studied region. Adhikary et al. (2015) prioritized the commonly grown crops based on rainwater use efficiency and their comparative performance during water stress condition in India. Results showed that vegetable crops have higher rainwater use efficiency than cereals and pulses. Among the cereals, maize and finger millet performed better in upland areas while they did better in paddies in low lands.  Igwe et al. (2015) examined optimum cropping patterns for selected root and tuber crop based production and resource allocation of smallholder farmers in Abia State, Nigeria, using the linear programming approach. They reported that farmers’ purchasing power would be enhanced given optimal crop production activity combination and land resource allocation. Singh et al. (2001) and Garg and Dadhich (2014) also studied on optimal cropping pattern in Pakistan and China, respectively.  The present study was performed to determine the prioritization of cultivating major agricultural crops (wheat, maize, alfalfa and barley) in sprinkler irrigation systems under both subsidized and non-subsidized conditions with respect to energy and water costs using numerical taxonomy method.}, keywords = {Sprinkler irrigation,Culture prioritizing,Energy,Numerical taxonomy,Qazvin}, title_fa = {اولویت بندی کشت محصولات عمده زراعی دشت قزوین با توجه به هزینه های انرژی و آب}, abstract_fa = {محدودیتمنابعآب و انرژی،عملکردپایینبهره­برداریازشبکه­هایآبیاری،افزایشجمعیتونیازروزافزونبهاینمنابعحیاتی،لزومبرنامه­ریزیمناسببه‌منظوراستفادهبهینهازمنابعآبرانمایانمی‌سازد.الگوی کشت نقش اساسی در طراحیشبکه­های آبیاری دارد. مطالعه حاضر با هدف تعیین اولویت­بندی کشت محصولات عمده زراعی (گندم، ذرت، یونجه و جو) در آبیاری بارانی با توجه به هزینه­های انرژی و آب در دو حالت یارانه­ای و غیر یارانه‌ای با استفاده از مدل تاکسنومی عددی انجام شد. در این راستا از اطلاعات و داده­های تفصیلی سیستم‌های آبیاری بارانی و عملکرد محصولات تحت کشت این سیستم­ها در سال 1390 در دشت قزوین استفاده شد. طبق نتایج به‌دست‌آمده، گندم و یونجه به ترتیب برای کشت‌های پاییزه و بهاره دارای بالاترین نسبت درآمد به هزینه بود. اما بر اساس نتایج مدل، گندم و ذرت در هر دو حالت یارانه­ای و غیر یارانه‌ای، به ترتیب برای کشت‌های پاییزه و بهاره در اولویت هستند.}, keywords_fa = {آبیاری بارانی,اولویت‌بندی کشت,انرژی,تاکسنومی عددی,قزوین}, url = {https://jise.scu.ac.ir/article_13447.html}, eprint = {https://jise.scu.ac.ir/article_13447_3ae03547b7b8a6e12dfc24dcdfd3246f.pdf} } @article { author = {Shirshahi, Fahimeh and babazadeh, Hossain and Ebrahimipak, Niazali and Zeraatkish, Yaghob}, title = {Calibration and assessment of AquaCrop Model for Managing the quantity and time of applying wheat deficit irrigation}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {31-44}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13451}, abstract = {When water resources are limited, the type of plant, growth stage and soil type should be considered for optimal water consumption. Also, it is necessary to calculate the reliable values ​​of soil moisture content, moisture stress and yield function in order to apply deficit irrigation. Management of water consumption in agricultural sector, regardless of water, soil and plant relationships, requires time and cost. Therefore, models of water, soil and plant relationships have been developed due to the limitations of these experiments regarding farm conditions, the short duration of the experiment and the limited number of scenarios examined in the experiment. Optimal irrigation planning is one of the main factors in promoting water productivity and yield. Models such as the AquaCrop which simulate the effects of water levels on yield are useful tools for on-farm water use optimization. Alizadeh et al. (2010), with irrigation on wheat in Karaj on five treatments with 100, 80, 60, 40 and 20% water requirement as well as a single-irrigation treatment and evaluation of the Aquacrop model for these treatments, concluded that the model was efficient for predicting the amount of seed yield, plant evapotranspiration and water use for 7-day irrigation intervals. The model was, however, less efficient for 14-day irrigation intervals. Babazadeh and Saraei Tabrizi (2012) in their research on soybean plant in Karaj showed that this model had a good performance in simulating product yield, evapotranspiration and water productivity, and that it could simulate the amount of evapotranspiration with an error of less than 4%. Although some studies have been conducted to evaluate the performance of the model in simulating the effects of irrigation on different products since the development of Version 4 of the Aquacrop model, there have been no comprehensive studies on how the model reacts to water stress in different growth stages. Therefore, the main objective of this study was to calibrate and evaluate the Aquacrop model in simulating the response of wheat under deficit irrigation conditions in different periods of plant growth in Shahrekord climate by comparing the results of field experiments to verify its accuracy in predicting different parameters such as grain yield and total dry matter in wheat.}, keywords = {AquaCrop,Deficit İrrigation,Optimization,Shahrekord,Yield}, title_fa = {واسنجی و ارزیابی عملکرد مدل آکواکراپ در مدیریت مقدار و زمان اعمال کم‌آبیاری در گندم}, abstract_fa = {برنامه‌ریزی بهینه آبیاری از مولفه‌های اصلی ارتقای کارایی مصرف آب و عملکرد محصول است. مدل­هایی مثل  آکواکراپ که اثرات مقادیر آب بر روی عملکرد محصول را شبیه­سازی می­کنند، ابزارهای مفیدی در بهینه‌سازی مصرف آب در مزرعه می­باشند. برای بررسی این ویژگی، آزمایشی با 5 تیمار آبیاری به­ترتیب با عمق آبیاری برابر 100، 85، 70، 55 درصد تبخیر-تعرق حاصل از لایسیمتر و بدون آبیاری در قالب طرح بلوک­های کامل تصادفی در شهرکرد اعمال شد. به­منظور ارزیابی تنش آبی در گندم، دوران رشد آن به شش دوره جوانه­زنی، پنجه­زنی، ساقه­دهی، گلدهی، شیری و خمیری و رسیدن گیاه تقسیم شد. مقدار RMSEn در شبیه­سازی عملکرد دانه کمتر از10 % یعنی در واسنجی 2/6 و 7/7 و اعتباریابی در جوانه­زنی، پنجه­دهی، رشد شیری-خمیری و رسیدگی به ترتیب 1/2، 9/4، 7/9 و 8/9 درصد محاسبه شد که نشان­دهنده ایده­آل بودن مدل­سازی می­باشد. نهایتاً مدل به عنوان ابزاری قدرتمند در مدیریت بهینه آبیاری توصیه می­شود.}, keywords_fa = {آکواکراپ,مراحل رشد,عملکرد,کم آبیاری}, url = {https://jise.scu.ac.ir/article_13451.html}, eprint = {https://jise.scu.ac.ir/article_13451_4d389748a6f87f80807aab051ee99498.pdf} } @article { author = {Shahvali Kohshori, Sahar and Ghazanfari Moghadam, mohammad sadegh and khanjani, mohammad javad}, title = {Optimal Management of Water Resources Using Application of Various Scenarios of Water Allocation (case study: Dez basin))}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {45-55}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13452}, abstract = {Introduction Water allocation in arid and semi-arid regions is considered a human challenge all around the world. The need for optimum utilization of water resources, especially in agricultural use, is very important. Agriculture, which uses the greatest percentage of most water resources, has also penetrated in human life and culture.  The aim of this study is to provide an approach to allocate and optimize water use in Dez basin using WEAP model.   Methodology The date regarding the users of water resources in Dez basin including the agricultural, domestic and industrial water demands, the precipitation, and the flow of rivers were collected from 2009 to 2014. All data were averaged monthly. The conceptual model was defined in WEAP. In term of model calibration, 60 percent of runoff data were used. The other 30 percent of remaining data were employed for the validation part. The optimum utilization policy of water resources in various scenarios were defined in WEAP. The scenarios were tested based on cropping pattern changes, reducing agricultural area, and the changes in irrigated and rain-fed ratio. All scenarios were compared by the reference scenario. In this scenario, the lowest percentage of need was related to the Western Dose. In this scenario, the course was 100 percent selected for drinking and industrial purposes in cities (Dezful, Andimeshk, Shoosh, Safi Abad, Dezab, Mardrood, Hor, Hamza and Saleh Shahr) and the entire villages of the region and some small industries due to the priority of providing higher, water use efficiency. On the other hand, due to the water withdrawal, regardless of the needs of the downstream and the transition to Karkheh, the percentage of providing low consumption needs as well as the percentage of the environmental need was not satisfactory. In order to improve the status of the reference scenario and the basin, two scenarios were defined. Considering that the agricultural sector is the largest water consumer in the region, it would be possible to significantly balance the supply-demand balance between water supply and demand by reducing the consumption in this sector. The scenarios were designed to reduce water consumption in agriculture and increase its economic efficiency in the basin. In all scenarios, the objective function was to optimize the benefit by cost ratio. In the scenarios implemented, the confidence level of other water uses, including the needs of the plain, downstream, environmental requirements, and energy requirements, was calculated to be 100%. In the second scenario, the water consumption of each product was studied in each plain. Regarding the diversity of products, in each plain, the products with high crop yields were considered and given the amount of water consumed by each plant. Moreover, the performance and the guaranteed price of purchasing those high-value products were identified and replaced with low-cost products. Finally, in the third scenario, by varying the percentage of irrigated and rain-fed products, the study of the amount of water saved versus the decline in the production of products was studied. Then, by evaluating the price of water versus crop products, the efficiency of this scenario was examined. Also, for each plain, the optimal percentage of irrigated and rain-fed area was determined. The optimal water and dry crop percentage was estimated based on the performance of these products and the amount of water consumed.  }, keywords = {Allocation,Dez basin,WEAP,Optimization}, title_fa = {بهینه سازی مدیریت منابع آب با اعمال سناریوهای مختلف تخصیص (مطالعه موردی: حوضه آبریز دز)}, abstract_fa = {آب به­عنوان یک نهاده با ارزش، می­بایست مورد استفاده بهینه قرار گیرد. مدیریت صحیح و بهینه آب، نیاز به تخصیص بهینه و اولویت بندی آن بین بخش­ها، مناطق و مصارف مختلف دارد.  هدف این تحقیق، ارائه الگویی برای بهینه کردن تخصیص و مصارف آب در دشت دز با استفاده از مدل WEAPاست. برای این منظور اطلاعات سامانه­های آب حوضه آبریز دز طی سال­های آبی 88-87 تا 93-92 جمع‌آوری و مدل مفهومی حوضه تعریف گردید. سپس سیاست­های بهره­برداری از منابع آب تحت سناریو­های مختلف مدل WEAPاجرا گردید. در این تحقیق دو سناریو مورد ارزیابی قرار گرفت که شامل سناریو­های تغییر الگوی کشت و  تغییر درصد کشت آبی و دیم بود که دو سناریو با سناریو مرجع مقایسه گردید. در سناریوهای مطرح شده تابع هدف؛ بهینه‌سازی سود به هزینه مبنا قرار گرفت. نتایج نشان داد اجرای سناریو تغییر الگوی کشت، مقدار درصد عدم تأمین نیاز محصولات، 15 درصد کاهش یافت. . در سناریو تغییر درصد کشت آبی و دیم آب مصرفی، 48 درصد کاهش یافت.}, keywords_fa = {تخصیص,حوضه آبریز دز,سناریو,ویپ,بهینه‌سازی}, url = {https://jise.scu.ac.ir/article_13452.html}, eprint = {https://jise.scu.ac.ir/article_13452_de4e9260719f78fa2405c86859fefe58.pdf} } @article { author = {\amiri, Ebrahim and Khorsand, Afshin and Daneshian, Jahanfar and Yousefi, Mohsen}, title = {Predicting Biomass and Grain Yield in Canola Under Different Water Regimes and Fertilizers Using AquaCrop Model}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {57-72}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13449}, abstract = {The AquaCrop model improves farm management practices, including plant density, planting time, and chemical fertilizers. It also simulates crop yield, soil water content, soil salinity, and water productivity. One of the applications of this model is the assessment of rainfed production during the long term, the effect of low fertilization, the productivity of real water on the farm, and the analysis of future climate scenarios. The disadvantages of this model include the lack of calibration of the amount and time of fertilization and the lack of consideration of plant diseases and weeds (Raes et al., 2009). The AquaCrop model is suitable for simulating different water and nitrogen managements on yield (Khoshravesh et al., 2012). Ebrahimi, Rezaverdinejad and Majnooni Heris (2015) evaluated the AquaCrop model under different irrigation and nitrogen fertilizer managements for estimating maize grain yield and biomass in Shiraz. This model predicted the grain yield of maize with high precision and biomass obtained in all treatments was more than the estimated values. Alishiri, Paknejad and Aghayari (2014) in simulating sugarbeet growth under different irrigation regimes and nitrogen fertilizer concluded that the highest error in performance simulation was in the treatment that had the highest fertilizer stress. The purpose of this study was to calibrate and validate the AquaCrop model for estimating the crop grain yield (GY) and biomass (B) of Canola under different irrigation regimes and pure nitrogen fertilizer levels in loamy soils in Gazvin, Iran, for two years.}, keywords = {Biomass,canola,Gazvin,Nitrogen}, title_fa = {پیش بینی ماده خشک و عملکرد کلزا تحت مدیریت های مختلف آبیاری و کود با استفاده از مدل AquaCrop}, abstract_fa = {تحقیق حاضر برای بررسی مدل آکوکراپ جهت پیش­بینی عملکرد و ماده خشک کلزا در قزوین، به مدت دو سال اجرا گردید. طرح آزمایشی به­صورت فاکتوریل در قالب بلوک­های کامل تصادفی با سه تکرار اجرا شد. سه سطح آبیاری نرمال، قطع آبیاری در مرحله ساقه­رفتن و قطع آبیاری در مرحله گل­دهی به­عنوان تیمار اصلی و سطح 0، 40، 80، 120 و 160 کیلوگرم در هکتار کود نیتروژن به عنوان عامل فرعی انتخاب شدند. برای مقایسه مقادیر شبیه­سازی و اندازه­گیری­شده عملکرد و بیوماس از شاخص­های آماری شامل ضریب تعیین (R2) و خطای نرمال­شده (NRMSE) استفاده شد. بر­اساس نتایج، خطای نرمال­شده پیش­بینی عملکرد دانه در مرحله واسنجی و ارزیابی به­ترتیب، 95/8 و 78/11 درصد و برای بیوماس به­ترتیب، 87/12 و 08/12 درصد محاسبه گردید. همچنین، مقدار ضریب تعیین در مراحل واسنجی و ارزیابی برای عملکرد کلزا توسط مدل به­ترتیب، 89/0 و 87/0 و برای بیوماس به­ترتیب، 79/0 و 84/0 به­دست آمد. نتایج نشان داد که این مدل در پیش­بینی عملکرد دانه و بیوماس کلزا، دارای دقت مناسب می­باشد و در تعیین استراتژی­های بهینه­سازی برای بهبود بهره­وری آب و مصرف کود نیتروژن در کشت کلزا در استان قزوین مورد قابل استفاده است.}, keywords_fa = {شبیه‌سازی مدل,عملکرد بیولوژیک,قزوین,کلزا,نیتروژن}, url = {https://jise.scu.ac.ir/article_13449.html}, eprint = {https://jise.scu.ac.ir/article_13449_f852cb9082be8dc1a04b02da7d66cd34.pdf} } @article { author = {khorramian, Mohammad and Zarifeenia, Naser}, title = {The Effect of Tape Irrigation Levels and Scheduled Surface Irrigation on Yield and Irrigation Water use Productivity of two Watermelon Varieties in Khuzestan}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {73-84}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.17185.1244}, abstract = {Watermelon is one of the most important profitable vegetables in Khuzestan. A mild water stress helps watermelon to develop the root system. Water stress has a negative effect on the yield of watermelon but it increases the quality of the fruit. Watermelon is usually planted in mid-June and is irrigated in a furrow irrigation which, generally, has low application efficiency. The high amount of water consumption, especially in the early stages of growth, requires considering the drip irrigation method. Recently, using drip (tape) irrigation has become more common in Khuzestan. However, there is not enough information regarding the impact of pressurized irrigation systems on the performance of watermelon varieties. Therefore, the current research was conducted with the aim of evaluating tape irrigation levels on watermelon varieties in Northern Khouzestan.   }, keywords = {Tape irrigation,Irrigation water productivity,watermelon,Khuzestan}, title_fa = {اثر مقادیر آبیاری قطره‌ای تیپ و آبیاری سطحی برنامه ریزی شده بر عملکرد و بهره‌وری مصرف آب دو رقم هندوانه در خوزستان}, abstract_fa = {یکی از راه‌های بهبود مدیریت مصرف آب آبیاری استفاده از روش‌ آبیاری قطره‌ای نواری در صیفی‌جات است. از این‌رو مطالعه حاضر با هدف بررسی سطوح مختلف نیاز خالص آبی به روش قطره‌ای بر عملکرد هندوانه و مقایسه آن با آبیاری جویچه‌ای، در سال‌های زراعی 1389و 1390 در منطقه خوزستان انجام شد. در این مطالعه سطوح مختلف 50، 75 ، 100 و 125درصد تأمین نیاز آبی به روش قطره‌ای (T50، T75، T100، T125) و آبیاری جویچه‌ای با تامین 100 درصد نیاز آبی (F100) روی دو رقم هندوانه به صورت کرت‌های یک‌بار خرد شده در قالب طرح بلوک‌های کامل تصادفی در سه تکرار مقایسه شدند. نتایج نشان داد که تیمار T125با 5/52 تن در هکتار بیشترین و تیمار T50 با 5/42 تن در هکتار کمترین عملکرد را داشت. بهره‌وری مصرف آب (WP) در روش و سطوح آبیاری قطره‌ای‌ اختلاف معنی‌داری در سطح 1% نشان داد. به طوری‌که WP در تیمارهایT50 و T75با مقادیر به ترتیب 1/17 و 7/13 بالاتر از تیمارهای T100 و T125با مقادیر 7/10 و 3/9 کیلوگرم بر مترمکعببود. حال آنکه اختلاف معنی‌داری بین عملکرد و WP دو رقم مشاهده نشد. نتایج کلی این مطالعه نشان داد که آبیاری قطره‌ای‌ با تامین 125درصد نیاز آبی برای کشت هندوانه در شرایط بدون محدودیت آب و 75 درصد نیاز آبی در شرایط محدودیت آب برای اراضی با بافت نیمه سنگین و شرایط اقلیمی مشابه با محل انجام این تحقیق قابل توصیه است.}, keywords_fa = {آبیاری قطره‌ای‌ تیپ,بهره‌وری آب آبیاری,هندوانه,خوزستان}, url = {https://jise.scu.ac.ir/article_13453.html}, eprint = {https://jise.scu.ac.ir/article_13453_bfad1f1e1ad81e40ce88acd725f0a365.pdf} } @article { author = {Armaghani, Akbar and Lashkarara, Babak and Akhond - Ali, ALi Mohammad}, title = {Investigating the Scouring Rate in Plunge Pools Resulting from Impinging Jets With and Without Aeration}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {85-97}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.22716.1619}, abstract = {draining the flood of enormous dams and transmitting the procedure to the downstream is one of the important issues regarding hydraulic structures. Plunge pools are the main structures to dissipate the high rate of energy. The amount of energy at an outlet jet depends on various parameters such as the dropping height, the thickness of the jet, and other environmental conditions. Local erosion in plunge pools with alluvial beds is a complex phenomenon and determining the geometric features of the scour hole is really difficult. The outlet flow mixes with the turbulence factor and hits the bed of the plunge pools with a semi-perpendicular condition. Therefore, the present study was conducted to determine the scour which was caused by inlet air along the middle water jet on the bottom of the plunge pools. Xu et al. (2004) tested the aeration effects on the scouring caused by the falling jet and obtained a small relationship between the percentage of air jet density and the relative scour depth. The results informed that aeration affects the shape of the scour hole and essentially reduces the scour depth. Manso et al. (2004) investigated the interaction of the geometric shape of the submerged pond with rocky bedding on the rate of diffusion of the falling jet. They tested various diameters of jets,5.5, 11 and 16.5 times the diameter of falling jet, on the smooth and rough beds to investigate the dynamic pressures with frequencies between 1 to 2 KHZ. Their findings showed that the geometric shape of the pond has a direct impact on the jet diffusion rate. Duarte et al. (2015) studied the effects of air inlet to jet on the dynamical pressure on the floor of the submerged pond. They increased the jet's velocity to 22 m/s. The final results showed that the air inlet to the jet led to a decline in the total pressure on the floor of the pond.}, keywords = {Scour,Pre-aeration,Tail water,Mixing,Energy dissipater,Spillway}, title_fa = {بررسی میزان آبشستگی در حوضچه استغراق ناشی از جت قائم برخوردی هوادهی شده و هوادهی نشده}, abstract_fa = {     در این مقاله بررسی اثر میزان اختلاط هوای ورودی به مغزه­ی جت قائم برخوردی بر الگوی آبشستگی در حوضچه استغراق ارائه شده است. در این مطالعه­ی آزمایشگاهی، الگوهای مختلف ورود هوا به ازای عمق­های مختلف پایاب در مقابل شرایط بدون هوای ورودی به جت مورد مقایسه قرار گرفت. طرح آزمایش­ها بگونه­ای تدوین گردید که درصد غلظت هوای ورودی به جت مقادیر صفر، 5، 10، 15 و 20 درصد را تجربه نماید. نتایج نشان داد که درصد غلظت هوا در میزان ابعاد حفره آبشستگی تأثیر به­سزایی دارد و ورود هوا منجر به کاهش میزان فرسایش در کف حوضچه­ی استغراق خواهد شد. نتایج حاکی از آن بود که با افزایش درصد غلظت هوای وارده به جت، میزان حداکثر عمق و طول نسبی سطح فرسایش یافته در کف بستر حوضچه­ی استغراق کاهش می‌‌یابند. این میزان تغییرات در ابعاد حفره‌ی ایجاد شده در کف حوضچه ابتدا بدون تأثیر و با گذر عدد فرود جت از حد بحرانی خود شروع به فرسایش بستر می‌نماید. نتایج نشان داد که علاوه بر عدد فرود جت، میزان هوای ورودی به جت نیز از یک حد آستانه بر­خوردار است و با کم شدن از حد مرزی پنج درصد در افزایش تنش­برشی مازاد وارده بر کف حوضچه بی تأثیر خواهد بود.}, keywords_fa = {آبشستگی,پیش هوادهی,پایاب,اختلاط,استهلاک انرژی,سرریز}, url = {https://jise.scu.ac.ir/article_13462.html}, eprint = {https://jise.scu.ac.ir/article_13462_ce6550ec04b248943493076d6ecaa3b9.pdf} } @article { author = {Piri, Halimeh and Ansari, Hossain and Parsa, Mehdi}, title = {The Interaction Effect of Salinity, Drought and Harvesting Dates on Yield, Quality and Efficiency of Forage Sorghum in Subsurface Drip Irrigation (Case Study: Sistan Plain)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {99-114}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13454}, abstract = {Forage sorghum is one of the tolerant salinity plants that can provide a good source of forage under irrigated conditions with saline water. Considering the quality of the products, their value is estimated with regard to their quality. Therefore, similar to many crops, the quality of forage plants should be considered. The quality of forage can be a function of forage consumption and its digestibility(Paterson et al., 1994). Forage plants in livestock trapping as a result of livestock production are undeniable in the supply of human needs. Unfortunately, in Iran, less attention is paid to the production and management of forage compared to other crops. As a result, lack of attention to the quantitative and qualitative increase of forage has led to a shortage of meat and dairy products and a decrease in their quality. Therefore, paying attention to the cultivation of forage plants with a scientific method in a country that is faced with the excessive growth of population and the shortage of rich meadows is very important (Noroozi et al., 2015). Sorghum is one of the important forage crops that is widely cultivated as summer forage in most of the dry and semi-arid countries of the world. Forage sorghum is used as green, dry, silage, or even for direct grazing of livestock (Rezvani moghaddam and Nasir mahallati, 2004). In thecurrent research, the effect of drought stress on sorghum was investigated. The results showed that the yield components including the number of seeds per plant and weight of 100 seeds decreased compared to the control (Innes and Black, 2001). Therefore, in this study, the effect of different levels of salinity and irrigation water and harvest on the yield of forage sorghum was investigated in order to use the results for proper planning to increase agricultural production in specific conditions, i.e., salinity and water restriction.}, keywords = {sorghum,cellulose-free,cellulose cell wall,total digestible nutrients}, title_fa = {تأثیر برهمکنش شوری، خشکی و چین برداشت بر عملکرد کمی و کیفی و کارایی سورگوم علوفه ای در آبیاری قطره‌ای زیرسطحی(مطالعه موردی: دشت سیستان}, abstract_fa = {      بهره‌برداریازمنابعآبوخاکباکیفیتکممی‌تواندبهعنوانیکگزینهمناسببرایتولیددرکشورهایدرحالتوسعهموردنظرقرارگیرد به همین منظور در این تحقیق اثر سطوح مختلف شوری (2، 5 و 8 دسی زیمنس بر متر)، سطوح مختلف آب آبیاری(120، 100، 75 و50 درصد نیاز آبی گیاه) و چین برداشت بر برخی پارامترهای کمی و کیفی گیاه سورگوم علوفه­ای در منطقه سیستان مورد بررسی قرار گرفت. آزمایش در قالب طرح فاکتوریل ‌اسپلیت ‌پلات در زمان با 12 تیمار و سه تکرار در سه مرحله چین برداشت انجام گرفت. نتایج نشان داد با افزایش شوری و کاهش عمق آب آبیاری عملکرد و کارایی علوفه ­تر و خشک کاهش یافت اما از این نظر بین تیمار آبیاری کامل و تیمار 75 درصد نیاز آبی گیاه تفاوت معنی‌دار مشاهده نشد. هم‌چنین بین تیمارهای آب با شوری دو و پنج دسی زیمنس بر متر تفاوت معنی­داری از نظر تولید علوفه مشاهده نشد. نتایج مربوط به اثر چین برداشت نشان داد مقدار عملکرد علوفه ­تر و خشک در چین دوم بهتر از چین اول و سوم بود. با افزایش شوری و کاهش عمق آب آبیاری مقدار غلظت دیواره سلولی عاری از سلولز(ADF) گیاه کاهش و مقدار غلظت دیواره سلولی همی سلولز (NDF) و کل مواد مغذی قابل هضم(TDN) افزایش یافت. بنابراین با توجه به نتایج به‌دست آمده و با توجه به کمبود آب در منطقه می‌توان آبیاری این گیاه را با 75 درصد نیاز آبی گیاه و با شوری پنج دسی زیمنس بر متر انجام داد بدون آن که تأثیر معنی­دار در میزان علوفه تولید شده داشته باشد و از آب ذخیره شده در جای دیگر استفاده نمود. هم­چنین بهترین برداشت علوفه از نظر کیفیت جهت مصرف دام  برداشت دوم بود.}, keywords_fa = {سورگوم,غلظت دیواره سلولی همی سلولز و عاری از سلولز و کل مواد مغذی قابل هضم}, url = {https://jise.scu.ac.ir/article_13454.html}, eprint = {https://jise.scu.ac.ir/article_13454_ef2b5c9af1d3b26b05a57f8f20102358.pdf} } @article { author = {sadeghi hardangi, ebrahim and ahadiyan, javad}, title = {Hydraulically Failure Mechanism of non-Cohesive Homogenous Protective Embankments by Overtopping}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {115-131}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13575}, abstract = {Introduction  flood control is one of the important requirements in development projects of major water resources. In this regard, the main purpose is to reduce or eliminate the economic, social and environmental damages that are caused by floods. On the other hand, many irrigation and drainage networks are in the vicinity of the rivers and, therefore, the occurrence of floods can cause irreparable damage to the land and network structure. Embankment failure due to water overtopping during floods is a common phenomenon which brings great financial losses, human casualties and environmental damages. Therefore, this research was aimed at investigating the mechanism as well as the effective variables on embankment failures.}, keywords = {homogenous levee,breach discharge,non-cohesive,lateral erosion,Protective River}, title_fa = {فرآیند شکست هیدرولیکی خاکر‌یزهای غیر چسبنده‌ی حفاظتی ساحلی در اثر جریان روگذر}, abstract_fa = {شکست خاک­ریزهایی که برای حفاظت از سیل در اطراف شبکه‌های آبیاری و زهکشی احداث می‌شوند، بر اثر عبور جریان سیل از روی آن­ها می‌تواند خسارات مالی، جانی و زیست‌محیطی را به همراه داشته باشد. بنابراین ضروری است فرآیند شکست و عوامل مؤثر بر آن مطالعه شود. از این رو در این تحقیق از چهار نمونه خاک غیرچسبنده با اندازه متوسط 44/0، 7/0، 7/1 و 4/2 میلی‌متر برای احداث خاکریز استفاده گردید. مشخصات هندسی خاک­ریز شامل طول کف 35/1 متر، ارتفاع 25/0 متر، طول تاج 1/0 متر، شیب بدنه 5/1:2 و عرض 35/0 متر است. دبی ورودی به فلوم فرعی ثابت و برابر با 4/1 لیتر بر ثانیه در نظر گرفته شد. نتایج نشان داد در نمونه‌های خاک با اندازه‌ی متوسط 44/0 و 7/0 میلی­متر تغییرات عرضی شکاف ایجاد شده به­صورت پلکانی بوده و در نمونه‌های با اندازه متوسط 7/1 و 4/2 میلی‌متر از ابتدا فرسایش عرضی شدید‌تر است. از طرفی میزان دبی عبوری از شکاف به دلیل تغییرات غیر یکنواخت تراز سطح آب پشت خاک­ریز به­صورت نوسانی تغییر نموده و زمانی که دبی عبوری از شکاف به حداکثر مقدار خود برسد، زمان شکست تعریف می‌گردد. نتایج نشان داد با افزایش اندازه متوسط ذرات از 44/0 به 7/1 میلی­متر مقدار حداکثر دبی خروجی 12 درصد افزایش می‌یابد و در نمونه‌های 3 و 4 علی­رغم افزایش اندازه متوسط ذرات از 7/1 به 4/2 میلی­متر، مقدار حداکثر دبی شکاف تقریباً برابر است. به­طور کلی با افزایش اندازه متوسط ذرات و زاویه اصطکاک داخلی نمونه‌ها، زمان شکست کاهش می­یابد و دبی حداکثر عبوری از شکاف تغییر چندانی نمی­کند. علاوه بر این پارامترهای بی‌بعد حاکم بر تحقیق استخراج گردید و به تفصیل مورد بحث قرار گرفت.}, keywords_fa = {خاک ریز همگن,دبی شکاف,مصالح غیرچسبنده,فرسایش عرضی,حفاظت رودخانه}, url = {https://jise.scu.ac.ir/article_13575.html}, eprint = {https://jise.scu.ac.ir/article_13575_2d586696a5d300e97ff172e1c5b4e070.pdf} } @article { author = {Ekhtiari khajeh, shiva and Dinpashoh, Yagob}, title = {Application of Effective Drought Index (EDI) in Characterizing Drought Periods (Case study: Tabriz, Bandar Anzali, and Zahedan)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {133-145}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13455}, abstract = {Drought refers to a period of time when water shortage occurs and, therefore, the environment and human life are disrupted. Of course, depending on the regional considerations and the objectives of any research, drought can have different definitions since the lack of water in different regions is defined differently. Drought forecasting is almost impossible and is usually a phenomenon that progresses slowly. As a result, well-timed detection in the early stages makes it possible to reduce the adverse effects on different parts of the environment, agriculture, water resources, etc. Drought characteristics such as duration and severity can be determined by drought indices. Scientists have proposed various indexes to assess this phenomenon. Drought index is a useful tool to assess drought characteristics. Effective Drought Index (EDI) is a new methodwhich is based on the cumulative daily precipitation and uses a weighting method.}, keywords = {Tabriz,Bandar Anzali,Zahedan,Drought,Effective Drought Index}, title_fa = {کاربرد شاخص خشکسالی مؤثر (EDI) برای بررسی دوره های خشکی (مطالعه موردی: ایستگاه های تبریز، بندر انزلی و زاهدان)}, abstract_fa = {در این مطالعه، مشخصات خشکسالی ایستگاه­های تبریز، بندرانزلی و زاهدان طی دوره­ی آماری از سال آبی 31-1330 تا 91-1390 با استفاده از شاخص خشکسالی مؤثر (EDI) مورد بررسی قرار گرفت. در این مطالعه شاخص بارش مؤثر روزانه، با محاسبه­ی شاخص­های دیگر از قبیل میانگین بارش مؤثر روزانه (MEP) برای هر روز سال، مقدار تفاضل بارش مؤثر روزانه از میانگین بارش مؤثر (DEP)، مقادیر استاندارد شده­ی DEP (که با SEP نشان داده می­شود) و بارندگی مورد نیاز برای برگشت به شرایط نرمال (که با PRN نمایش داده می­شود)، به­دست آمد و در نهایت شاخص خشکسالی مؤثر (EDI) برای ایستگاه مورد مطالعه در کل دوره­ی آماری به­دست آمد. همچنین نمودار سری زمانی مربوط به پارامترهای محاسبه شده نیز رسم گردید.طبق نتایج به­دست آمده معلوم شد که سال­های آبی 87-1386، 87-1386 و 81-1380 به­ترتیب برای ایستگاه­های تبریز، بندر انزلی و زاهدان خشک­ترین سال آبی در طول دوره­ی آماری 60 ساله می­باشد. براساس تعداد روزهایی که در هر ایستگاه خشکسالی رخ داده است، می­توان نتیجه گرفت که ایستگاه­های بندرانزلی، تبریز و زاهدان به­ترتیب با 2407، 1517 و 1338روز خشک از کل دوره­ی آماری به­ترتیب تعداد در رتبه­های اول تا سوم جای گرفته­اند.}, keywords_fa = {تبریز,بندر انزلی,زاهدان,خشکسالی,شاخص خشکسالی مؤثر}, url = {https://jise.scu.ac.ir/article_13455.html}, eprint = {https://jise.scu.ac.ir/article_13455_7e6bc9866c481e2cb0535f36f54c8b54.pdf} } @article { author = {ghobadian, rasool and Basiri, Mahsa and Seyedi Tabar, Zahra}, title = {Investigating the Effect of Circular Bridge Piers on Local Scouring at 60° Channel Junctions Using SSIIM1 3D Numerical Model}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {147-163}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13576}, abstract = {Insertion of different water structures such as bridge piers in the flow path contracts the flow cross section and causes backwater at upstream sections. The velocity and turbulence of flow increases around these structures and bed scouring will occur. To discover the effect of different structures in the vicinity of channel junctions on flow and sediment patterns, precise studies should be conducted. The effects of bridge pier on flow and sediment patterns in stright and curve open channels have been investigated (Salaheldin et al., 2004, Tabib zadeh et al., 2005). However, its effect on flow and sediment patterns at open channel confluences has rarely been studied.}, keywords = {Local Scouring,Bridge pier,Open channel junction,Relative radius,SSIIM1}, title_fa = {تأثیر پایه پل دایره ای بر آبشستگی موضعی در محدوده تلاقی 60 درجه با استفاده از مدل سه بعدی SSIIM1}, abstract_fa = {     وقوعآبشستگیدراطراف پایه‌هایپلیکیازعمده‌تریندلایلتخریبپل‌هااست. این پدیده عموماً در آبراهه‌های مستقیم مورد بررسی قرار گرفته است و کمتر به مطالعه پایه پل در محل تلاقی رودخانه‌ها پرداخته شده است. به همین دلیل در این تحقیق با استفاده از مدل عددی SSIIM1 ابتدا الگوی جریان و رسوب­گذاری در یک تلاقی 60 درجه شبیه‌سازی ومدل با داده‌های اندازه‌گیری صحت‌سنجی شد. سپس به بررسی تأثیر وجود پایه پل با شعاع نسبی (r/w؛ r=شعاع پایه، w=عرض کانال اصلی) 05/0 ، 1/0 ، 15/0 و 2/0 در محدوده تلاقی بر الگوی فرسایش و رسوبگذاری پرداخته شد. نتایج نشان داد تطابق خوبی بین سرعت‌های افقی محاسبه شده توسط مدل عددی با داده‌های آزمایشگاهی وجود دارد. همچنین مدل توانایی نسبتاً خوبی، را در پیش‌بینی موقعیت و مقدار حداکثر عمق فرسایش دارد (خطایی کمتر از 10 درصد) ولی ارتفاع رسوب­گذاری را بیشتر از مقدار آزمایشگاهی برآورد می‌‌کند. علاوه بر این نتایج نشان داد که وقتی پایه پل کوچک است (1/0 و 05/0=r/w) به دلیل کاهش اختلاف سطح‌آب بالادست و پایین‌دست کانال‌اصلی نسبت به حالت بدون پایه، وجود پایه پل باعث کاهش عمق آبشستگی در محدوده تلاقی می‌گردد. این کاهش برایشعاع‌های نسبی 05/0 و 1/0 به ترتیب 38 و 6 درصد به­دست آمد. در حالی­که وقتی شعاع پایه‌پل بزرگ است (15/0 و 2/0=r/w) کاهش عرض موثر عبور جریان باعث تشدید آبشستگی در محدوده تلاقی و اطراف پایه می‌گردد. این افزایش برای  شعاع های نسبی 15/0 و 2/0 به ترتیب 17 و 68 درصد به­دست آمد.}, keywords_fa = {آبشستگی موضعی,پایه پل,تلاقی کانال‌های روباز,شعاع نسبی,SSIIM1}, url = {https://jise.scu.ac.ir/article_13576.html}, eprint = {https://jise.scu.ac.ir/article_13576_cfd5b632bc3b6a613426b389a3d449b7.pdf} } @article { author = {Eskandari, ALi and Solgi, Abazar and Zarei, Heidar}, title = {Simulating Fluctuations of Groundwater Level Using a Combination of Support Vector Machine and Wavelet Transform}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {165-180}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13577}, abstract = {Groundwater resources are known as one of the most important water resources. Proper knowledge and exploitation of groundwater, particularly in arid and semi-arid regions, plays an important role in sustainable development in different fields such as agricultural, social, and economic activities. Many models have been used in order to predict groundwater level including empirical time series models and physical models (Bierkens, 1998). It is true that these models have been widely used, but when the dynamic behavior of a hydrological system is changed during the time, the mentioned models may not be able to predict water resource parameters, therefore making them unsuitable (Nayak et al. 2006). On the other hand, physical models need a great deal data to simulate groundwater fluctuations and, since the relations among effective parameters may be nonlinear, the mentioned models are not practical enough to show the existing relations.}, keywords = {Support vector machine,Wavelet Transform,Groundwater tevel,Simulation}, title_fa = {شبیه سازی نوسانات سطح آب زیرزمینی با استفاده از ترکیب ماشین بردار پشتیبان و تبدیل موجک}, abstract_fa = {امروزه در بسیاری از کشورهای جهان، به ویژه در مناطقی که با کمبود آب‌های سطحی مواجه هستند، بهره­برداری از منابع آب زیرزمینی بیش از پیش مورد توجه قرار گرفته است. بهره­برداری بی­رویه از این منابع، بدون بهره­گیری از مطالعات منابع آب زیرزمینی می­تواند مشکلات و پیامدهای جبران‌ناپذیری را به­بار آورد. مدیریت صحیح این منابع با شناخت کامل و آگاهی از این منابع امکان­پذیر است. در این تحقیق از مدل ماشین بردار پشتیبان (SVM) برای پیش­بینی ماهانه سطح آب زیرزمینی دشتبرازجان در استان بوشهر در یک دوره 12 ساله (1392-1381) استفاده شد. به منظور بهبود نتایج این مدل، ابتدا داده­های ورودی با استفاده از تبدیل موجک به زیر سیگنال‌هایی تبدیل شدند. سپس زیرسیگنال‌های مزبور، به­عنوان ورودی به مدل SVM به­عنوان مدل ترکیبی ماشین بردار پشتیبان-موجک (WSVM) استفاده شدند. برای پیش­بینی سطح آب زیرزمینی از پنج حلقه چاه مشاهده­ای به­همراه متغیرهای سطح آب زیرزمینی،بارش، تبخیر و دما، استفاده شد.نتایج نشان داد مدل ترکیبی WSVM دارای عملکرد بهتری نسبت به مدل SVM می­باشد. به­طوری که عملکرد مدل ترکیبی در شبیه­سازی ماهانه سطح آب زیرزمینی 8 درصد نسبت به مدل SVM بهتر بود. این روش ایده­ای جدید برای افزایش دقت مدل­ها و کاربرد آن‌ها در مسائل هیدروژئولوژی می­باشد. در پایان سطح آب زیرزمینی برای یک سال آینده با مدل ترکیبی برآورد گردید.}, keywords_fa = {ماشین بردار پشتیبان,تبدیل موجک,سطح آب زیرزمینی,شبیه سازی}, url = {https://jise.scu.ac.ir/article_13577.html}, eprint = {https://jise.scu.ac.ir/article_13577_9254caedd369b8e711575b5307734061.pdf} } @article { author = {Taghdisi, Babak and Kesmaeili, Kazem and Khodashenas, Saeid Reza}, title = {The Effect of Adding Resistance Supplementary Materials to Gypsum Soils for Lining Water Conveyance Channels}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {181-194}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.13288}, abstract = {Using some additive materials to gypsum soil can increase its compressive strength and erosion and make it fit for civil  projects in irrigation networks. In this study, (Journal No. 268., 2003) five levels of cement (5, 8, 10, 12 and 15 % to dry soil) and three levels of micro silica (0, 5 and 10 % cement) were added to the local soil. The processing of soil samples were conducted in two temperature (27 and 400C) and their compressive strength was studied and analyzed via SAS statistical software. In the present research, the best combination, with the minimum addition and a high compressive strength, was reached by adding 10% cement and 10% micro silica to the soil.  In order to evaluate the sample’s erosion potential, it was exposed to water jet plane in four angles (Ө = 0,30,60, 90), five speeds (V = 2, 4, 6, 8 and 8.64 m/s) and three times (T =4,8 and 12 hr) and the highest weight loss erosion (dw) was observed between the speed of 4 to 8 m/s and the time of 8 hours later in a horizontal state (0 Ө =). .}, keywords = {Soil stabilization,Silica,Cement,Lining water conveyance channels}, title_fa = {بررسی تأثیر افزودن مواد مکمل مقاومتی به خاک‌های گچی برای پوشش کانال‌های انتقال آب}, abstract_fa = {استفاده از یکسری افزودنی­ها به خاک‌های گچی می‌تواند سبب افزایش مقاومت فشاری و فرسایشی و مناسب شدن آن‌ها برای اجرای پروژه‌های عمرانی در شبکه‌های آبیاری گردد. در این مقاله، با افزودن پنج سطح سیمان (5، 8، 10، 12 و 15 درصد نسبت به خاک خشک)، سه سطح میکروسیلیس (0، 5 و 10 درصد نسبت به سیمان) به خاک منطقه و عمل‌آوری نمونه‌ها در دو دمای (27 و 40 درجه سانتی‌گراد )،مقاومت فشاری آن‌ها بررسی و با نرم افزار آماری SAS تجزیه و تحلیل گردید. در این تحقیق بهترین ترکیب با در نظر گرفتن حداقل مواد افزودنی به خاک منطقه، برای رسیدن به مقاومت فشاری بالا با افزودن 10% سیمان و 10% میکروسیلیس تشخیص داده شد. در همین راستا به‌منظور بررسی توان فرسایشی، این نمونه تحت تأثیر جت آب صفحه‌ای در چهار زاویه (درجه90،60،30، 0 Ө =)، پنج سرعت (متر بر ثانیه 64/8 و 8 ،6،4، 2 V =) و سه زمان (ساعت 12،8، 4 T =) قرار گرفت و بیشترین افت وزنی فرسایشی (dw) در حد فاصل سرعت 4 تا 8 متر بر ثانیه و زمان 8 ساعت به بعد و در حالت افقی (0 Ө =)  مشاهده گردید.}, keywords_fa = {تثبیت خاک‌های گچی,میکروسیلیس,سیمان,پوشش کانال‌های انتقال آب}, url = {https://jise.scu.ac.ir/article_13288.html}, eprint = {https://jise.scu.ac.ir/article_13288_72e0468523bb5a0c53e8268efccd00e8.pdf} } @article { author = {Behrahi, Kianoush and sayyad, Gholam Abbas and Landi, Ahmad and peyrowan, Hamid reza}, title = {The Effect of Land use Type and Slope Degree on Phosphorous and Potassium Losses in Runoff Using Rainfall Simulators (Case study: Kakasharaf Watershed Basin, Lorestan)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {195-209}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.21459.1543}, abstract = {Water erosion causes serious damage to all natural ecosystems, including the soil and nutrients loss (Collman et al., 2010). Nutrients loss and soil fertility reduction are the most important effects of soil erosion, which increase the fertility of soils in downward of the basin and cause contamination of surface and underground water (Telles et al., 2013). Soil loss is a serious problem in developing countries and has been a source of concern (Wolancho, 2012). Phosphorus and potassium are important elements in agricultural products. Each of the mentioned elements has especial behavior in transferring by runoff. Potassium is very mobile in comparison with phosphorus, so it is easily displaced by water from the runoff process. Despite numerous studies done in the world regarding the loss of elements in runoff and sediment, there is no accurate information in this regard in Iran. In Lorestan Province, due to the lack of attention to land suitability in land uses, basins are severely subject to erosion and soil degradation. Therefore, the present study was conducted to investigate the effects of slope and type of land use on the loss of potassium and phosphorus in runoff in Kakasharaf Basin in Lorestan province.}, keywords = {Soil loss,phosphorus,Potassium,Forest,Pasture,Agriculture}, title_fa = {بررسی تاثیر کاربری اراضی و طبقات شیب بر هدررفت عناصر غذایی در رواناب تولیدی با استفاده از باران‌ساز مصنوعی (مطالعه موردی در حوضه آبخیز کاکاشرف- لرستان)}, abstract_fa = {هدررفت عناصر غذایی و کاهش حاصل­خیزی خاک از مهم­ترین اثرات تخریب خاک است. بنابراین نیاز است که عوامل مؤثر بر آن در حوضه­های مختلف مورد بررسی قرار گیرد. حوضه آبخیز کاکاشرف در استان لرستان از جمله حوضه­هایی است که در معرض تخریب قرار دارد. لذا در این حوضه، تأثیر نوع کاربری اراضی (مرتع، جنگل و زراعت) و طبقات شیب (10، 20 و 30 درصد) بر هدررفت فسفر و پتاسیم در رواناب تولید شده ، بررسی شد. در این تحقیق با استفاده از دستگاه شبیه­ساز باران، از شش زیر حوضه، تعداد 93 واقعه باران با شدت 36 میلی­متر در ساعت و با تداوم 30 دقیقه ایجاد و میزان تلفات عناصر فسفر و پتاسیم ناشی از هر بارش در سه کاربری و سه سطح شیب اندازه­گیری شد. نتایج نشان داد که میانگین هدررفت فسفر در رواناب در سه کاربری جنگل، مرتع و زراعت به­ترتیب 22/0، 26/0 و 21/0 میلی­گرم بر کیلوگرم خاک و در سه شیب 10، 20 و 30 درصد 22/0، 21/0 و 25/0 میلی­گرم برکیلوگرم بود. همچنین میانگین هدررفت پتاسیم در کاربری جنگل، مرتع و زراعت به­ترتیب 38/18، 32/22 و 71/18 میلی­گرم برکیلوگرم و در سه شیب 10، 20 و 30 درصد به­ترتیب 74/20، 71/18 و 96/19 میلی­گرم بر کیلوگرم برآورد گردید. تجزیه واریانس اثر کاربری بر هدررفت فسفر و پتاسیم نشان داد که هدررفت فسفر در رواناب در شیب­های 10، 20 و 30 درصد و هدررفت پتاسیم در رواناب در شیب 30 درصد معنی­دار نبود. ولی اثر کاربری بر مقدار هدررفت پتاسیم در شیب 10درصد در سطح پنج درصد و در شیب 20 درصد در سطح یک درصد معنی­دار بود. همچنین اثر شیب بر هدررفت فسفر در کاربری جنگل در سطح یک درصد و زراعت در سطح پنج درصد معنی­دار ولی در کاربری مرتع معنی­دار نشد.  اثر شیب بر هدررفت پتاسیم در کاربری­های مرتع و جنگل معنی­دار نبود و تنها در کاربری زراعت معنی­دار شد. با افزایش شیب غلظت هدرفت فسفر روند افزایشی و غلظت هدررفت پتاسیم روند کاهشی نشان داد.}, keywords_fa = {تلفات خاک,فسفر,پتاسیم,جنگل,مرتع,کشاورزی}, url = {https://jise.scu.ac.ir/article_13504.html}, eprint = {https://jise.scu.ac.ir/article_13504_9732f18506ee712d596dc9b30c46d371.pdf} } @article { author = {shahi, zahra and Sharifi, Mohammad Reza}, title = {An Algorithm for Selecting the Effective Distance of the Wind Shelter to Verify the Wind Shelter Status at the Lake Level of Dams (Case Study: Lake of Dez Reservoir Dam)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {1}, pages = {211-223}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.23774.1697}, abstract = {To calculate the wind shelter index (Sx) for points in a region, the wind shelter index values are calculated for each set of points in different lengths and directions. Among these lengths, the length of the Sx corresponding to it has the highest wind shelter and is known as an effective length. Winstral et al. (2002), Winstral and Marks (2002), Erickson et al. (2005), Molotch et al. (2005), Molotch and Bales (2006), Sharifi et al. (2007), Litaor et al. (2008), Tabari et al. (2009) and Maroufi el al. (2010) in order to determine the effective length in snowy areas inevitably used the correlation of Sx values for each desired length and depth of snow. Winstral et al. (2009) in study of wind speed distribution methods  determined the effective length by establishing the relationship between the difference in the values of the Sx and the difference in the velocity of the wind. Farokhzadeh et al. (2014) also succeeded in determining the effective length by examining the correlation between a parameter named average wind shelter slope and Sx, provided that the selected points were in wind conditions. Therefore, due to the limitation in the method proposed by Farokhzadeh et al. (2014) for calculating the Sx in non-snow areas such as lake levels, the use of a specific type of algorithm for determining the effective wind shelter length seems necessary (Shahi, 2017). Therefore, in this study, according to the existing conditions, a method was proposed for selecting the effective length of the shelter.}, keywords = {Wind,Free water level,Wind shelter index,Effective distance wind shelter,Dez Dam Reservoir}, title_fa = {الگوریتم انتخاب طول مؤثر بادپناهی به منظور بررسی وضعیت بادپناهی در سطح دریاچه سدها (مطالعه موردی : سطح دریاچه سد مخزنی دز)}, abstract_fa = {باد به­عنوان پدیده­ای طبیعی، نقش به­سزایی در بسیاری از فرایندهای هیدرولوژیکی ایفا می­کند. کمیتی تحت عنوان شاخص بادپناهی قادر به بررسی تأثیر باد در حوزه­های مختلف هیدرولوژی می­باشد. محاسبه شاخص بادپناهی در نقاط جغرافیایی مختلف، مستلزم تعیین طول مؤثر در محدوده مورد مطالعه می­باشد. تعیین روش انتخاب طول مؤثر در مطالعات قبلی، بسته به نوع کاربرد شاخص بادپناهی، هر یک با محدودیتی مواجه است. به­عنوان نمونه، در مناطق برفی که از روشی تحت عنوان همبستگی برای انتخاب طول مؤثر استفاده می­گردد، لزوما نیاز به داشتن عمق برف در نقاط مورد مطالعه می­باشد. همچنین، روشی موسوم به شیب میانگین بادپناهی، برای انتخاب طول مؤثر در شرایط غیر برفی با این محدودیت که، نقاط مورد مطالعه، لزوما در شرایط با بادپناهی قرار داشته باشند، مواجه است.در تحقیق حاضر، به­منظور محاسبه شاخص بادپناهی در نقاط مختلف واقع بر سطوح افقی، نظیر دریاچه سد مخزنی دز، نسبت به ارائه روشی متفاوت و متناسب با نوع کاربرد شاخص بادپناهی، برای تعیین طول مؤثر اقدام گردیده است. برای این منظور، از روشی تحت عنوان تفاضل طول­های حداکثر متوالی، اقدام به انتخاب طول مؤثر بادپناهی گردید. لذا نتیجه تحقیق ضمن تاکید بر ضرورت متناسب بودن روش انتخاب طول مؤثر با نوع کاربرد شاخص بادپناهی، شامل معرفی روشی جدید برای انتخاب طول مؤثر در شرایطی نظیر دریاچه سد مخزنی می­باشد. طول مؤثر در محدوده دریاچه مورد مطالعه، برابر با 1000 متر به­دست آمد.}, keywords_fa = {باد,سطح آزاد آب,شاخص بادپناهی,طول مؤثر بادپناهی,مخزن سد دز}, url = {https://jise.scu.ac.ir/article_13578.html}, eprint = {https://jise.scu.ac.ir/article_13578_c8b8804d4ac6e0e58ea4e18b26da25c7.pdf} }