@article { author = {Salehi, Seyedeh Marziyeh and Radmanesh, Feridon and Zarei, Heidar and Mansouri, Behzad and Solgi, Abazar}, title = {A combined Time Series – Wavelet Model For Prediction of Ground Water Level (Case Study: Firuzabad Plain)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {1-16}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.14057}, abstract = {Recently, the phenomenon of climate change, drought, the exploitation of the ground water has caused a sharp decline in groundwater levels, which has also led to groundwater related subsidence and desertification. Therefore, reliable prediction of groundwater level for managing these resources is of prime importance. Nowadays wavelet transforms through signal decomposition to time and frequency has created an exceptional method for signal processing, with the help of the transformation of the wavelet that has the ability to split the time series into a multi-dimensional substrate with different scales. One of the useful characteristics of wavelet transforms is the filtering algorithm, which divids the data into two groups of approximation and details by passing them through the wavelet filter. In this study, monthly groundwater surface, rainfall, and temperature data were used. Using the program code written in MATLAB software, it is necessary to analyze the time series data of all three parameters of temperature, precipitation, and water level. The values ​​of the parameters were selected as inputs and placed in the wavelet function. For analyzing all the parameters, according to various mother-wavelet experiments, and considering the above mentioned point, five mother-wavelets (Haar, Coif, Symlet, Db, Db4) were selected. For this purpose, the program was first implemented for each of the following wavelets with 4 different decomposition levels. After several software runs under specific conditions and scenarios and then comparing them with each other, results were obtained.}, keywords = {Wavelet,Time series,ARIMA,Ground water,Firuzabad}, title_fa = {پیش بینی سطح آب زیرزمینی با استفاده از مدل ترکیبی سری زمانی-موجک (مطالعه موردی: دشت فیروزآباد)}, abstract_fa = {در سال­های اخیر، پدیده تغییراقلیم، خشک­سالی، برداشت بی­رویه آب­های زیرزمینی،... باعث افت شدید سطح آب­های زیرزمینی شده است؛ که خطراتی هم­چون نشست زمین و افزایش کویری شدن را در پی داشته است. لذا پیش­بینی قابل اطمینان سطح آب­های زیرزمینی برای مدیریت این منابع، حائز اهمیت است. امروزه تبدیل موجک از طریق تجزیه سیگنال­ها به زمان و فرکانس شیوه نوینی را برای پردازش سیگنال ارائه می­دهد. در پژوهش حاضر، به بررسی کاربرد استفاده از مدل­های سری زمانی و مدل ترکیبی سری زمانی-موجک برای پیش­بینی سطح آب زیرزمینی دشت فیروزآباد اقدام گردید. برای این منظور سری زمانی با استفاده از تبدیل موجک، توابع مختلف موجک (هار، سیملت، کویفلت، دی بی و دی بی4)، در سطوح متفاوت تجزیه، به زیرسری­هایی تبدیل شد. سپس به­عنوان ورودی مدل سری زمانی آریما درنظرگرفته شد. سپس نتایج آن با نتایج مدل سری زمانی مقایسه شد. نتایج نشان­دهنده کارایی بهتر و خطای کمتر مدل ترکیبی سری زمانی-موجک بود.}, keywords_fa = {Wavelet,Time series,ARIMA,Ground water,Firuzabad}, url = {https://jise.scu.ac.ir/article_14057.html}, eprint = {https://jise.scu.ac.ir/article_14057_0a9ef12232eea5705406aeb2b1db5fc1.pdf} } @article { author = {Rashki Ghaleno, Mohammad and Azhdary Moghadam, Mehdi and Azizyan, Gholam Reza and Khalifehei, Kamran}, title = {Numerical Simulation of Chute Energy Dissipation with Submerged Cylindrical Obstacle using Flow 3D Model}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {17-28}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.13748}, abstract = {In general, the energy dissipating structures are used in order to prevent the destructive effects of high flow velocities through the spillways. Among these structures, the most commonly used structures are chutes in water conveyance systems in dams, irrigation and drainage networks, alluvial rivers and wastewater collecting and disposal systems. The energy dissipating structures are used at the downstream of this systems. The advantage of this method to the previous methods such as stepped spillway is that the risk ‎of ‎cavitation is less and it is more economical. ‎One of the ways to reduce the size or eliminate low energy dissipating structures is to use methods for reducing the flow energy over the chutes. One of these techniques, which has been used so far, is to create steps over the spillway. Another method is the application of obstruction or roughness on the spillway’s bottom. Baffled chute is a type of the dissipaters that is used extensively in open drainage networks and where the tailwater level has large fluctuations. The significance of this type of energy loss becomes more evident where the tailwater has obvious fluctuations. The purpose of this study is to numerically simulate the effect of cylindrical baffles over the chutes on the energy dissipation magnitude. In particular, the purpose of this study is to determine whether the cylindrical baffles can effectively reduce the kinetic energy and reduce the dimensions of the stilling basin.}, keywords = {Chute,Energy dissipation,Submerged Obstacle,Numerical simulation,Flow 3D}, title_fa = {شبیه سازی عددی استهلاک انرژی در تندآب با موانع استوانه ای مستغرق با مدل Flow 3D}, abstract_fa = {در این تحقیق به قابلیت استهلاک انرژی تندآب با موانع مستغرق استوانه­ای پرداخته شد. از مزیت­های این روش بر روش­های قبلی مانند سرریز پلکانی، خطر کاویتاسیون کمتر و اقتصادی­تر بودن آن می­باشد. در این تحقیق برای تحلیل عددی از نرم­افزار FLOW-3D استفاده شده است. این نرم­افزار با استفاده از روش حجم محدود معادلات جریان را حل می­کند. در این تحقیق جریان از نوع دائمی و اغتشاشی و سیال تراکم­ناپذیر در نظر گرفته شده است. مدل آشفتگی مورد استفاده در این تحقیقمی­باشد. بررسی افت انرژی در همه مدل­ها­ی شاهد نشان می­دهد، مقدار افت انرژی در همه­ی شیب­ها با افزایش نسبت YC/H(Yc عمق بحرانی و H ارتفاع تندآب) دارای روند نزولی با شیب نسبتاً تند می­باشد. به­طور کلی می­توان گفت استهلاک انرژی در مدل­های شاهد نسبت به انرژی بالادست در محدوده دبی­های این تحقیق  بین 10 درصد برای مدل با شیب 1 به 4 تا 64 درصد برای مدل با شیب 1 به 5 متغیر است. نتایج مقایسه افت در مدل­های با بستر دارای موانع نشان می­دهد در همه مدل­ها روند نزولی با شیب نسبتاً تند و نرخ کاهش به صورت تقریباً خطی می­باشد.  در مقایسه افت انرژی در شیب­های مختلف، مقدار نسبی افت انرژی در شیب 1 به 4 دارای بیشترین و در شیب 1 به 5 دارای کمترین مقدار می­باشد. به­طور کلی می­توان گفت استهلاک انرژی در این مدل­ها نسبت به انرژی بالادست از 81 درصد برای مدل با شیب 1 به 4 تا مقدار 43 درصد در مدل با موانع استوانه­ای و شیب 1 به 6 و 1 به 8 متغیر است. هم­چنین در مدل­های با موانع بستر، میزان استهلاک انرژی از 16 تا 39 درصد نسبت به مدل شاهد افزایش داشته است. در پایان نیز با استفاده از رگرسیون چند متغیره روابطی برای پیش­بینی افت انرژی در این نوع تندآب در حالت بستر صاف و با وجود موانع استخراج شد.}, keywords_fa = {Chute,Energy dissipation,Submerged Obstacle,Numerical simulation,Flow 3D}, url = {https://jise.scu.ac.ir/article_13748.html}, eprint = {https://jise.scu.ac.ir/article_13748_62b6227a5625c27a72d7ab5abf495ff2.pdf} } @article { author = {Mirzad, Mohamad and Shafai Bejestan, Mahmood}, title = {Investigating the Effect of Coastal Triangular Boundaries on the Topography of the 180-Degree of the Jangiye Bend of the Karoon River using a Physical Model}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {29-43}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2018.14058}, abstract = {Meandering river bend migration is a common phenomenon which destroys agricultural lands and civil infrastructures around the river.  The main cause of such migration is due to developing a secondary flow within the bend in which a helicoidally circulation is developed and as a results the scour hole at the outer bank toe is created which causes collapse of the outer bank and its migration.  Over the last decade many countermeasures against such scour have been developed. These measures modify the flow within the bend redistribute the local bed shear stress for the purpose of reducing the toe bank scour. Triangular vanes are one of such structures that help stabilize the outer bank by modifying the flow pattern in the river bend to prevent the scouring of the outer bank.  Triangular vanes have been studied successfully by Bhuiyan et al. (2010) in a sinuosity river path and in a 90 degree flume bend by Bahrami-Yarahmadi and  Shafai Bejestan (2016). Based on these studies this measure, if designed properly, not only can shift the scour from the outer bank toe to the middle of the river, it transport sediment to the downstream of the vane and deposited in between the vanes which create a new bank. The structure has been defined environment friendly since it create an environment suitable for aquatic animals. The aim of the present study is to investigate the application of triangular vanes in a 180 degrees of Jangiyeh bend in Karoon River south of Ahvaz and to determine the bets distance for installing the vanes.}, keywords = {Environmental Structures,Triangular Vanes,River Bend,Bank erosion,Distorted River Model}, title_fa = {بررسی تأثیر فاصله قرارگیری صفحات مثلثی متصل به ساحل بر توپوگرافی بستر قوس 180 درجه جنگیه رودخانه کارون با استفاده از مدل فیزیکی}, abstract_fa = {صفحات مثلثی از جمله سازه­هایی هستند که با اصلاح الگوی جریان در قوس رودخانه ضمن جلوگیری از آبشستگی ساحل بیرونی باعث تثبیت ساحل نیز می­شوند. این پژوهش به­منظور بررسی تأثیر فاصله قرارگیری صفحات مثلثی بر توپوگرافی بستر قوس جنگیه رودخانه کارون با استفاده از مدل فیزیکی قوس در فواصل 4، 5، 6 و 8 برابر طول مؤثر صفحات صورت گرفت. آزمایش­ها در شرایط مختلف جریان (اعداد فرود23/0، 26/0 و 29/0 در بازه­ی مستقیم پایین­دست قوس) صورت گرفت. در این پژوهش زاویه صفحات نسبت به ساحل بالادست 30 درجه بوده و کلیه آزمایشات در شرایط آب زلال انجام شد. نتایج نشان داد که صفحات مثلثی باعث انحراف لایه­های فوقانی جریان از ساحل بیرونی به طرف میانه مجرا شده و لایه­های پایینی به سمت قوس بیرونی حرکت می­کند که در اثر این رسوبات به سمت ساحل بیرونی هدایت شده و بین صفحات رسوب گذاری مشاهده می شود. مقایسه توپوگرافی بستر نشان داد که خط القعر از ساحل خارجی به سمت پنچه صفحات منتقل می­شود که باعث کاهش عمق آبشستگی پنجه ساحل خارجی می گردد. در شرایط مختلف جریان حداکثر عمق آبشتگی در فاصله نصب ۵ برابر طول مؤثر کمترین مقدار را داشت به­طوری­که در مقایسه با فاصله نصب ۴ برابر طول مؤثر ۴۵ درصد و نسبت به فاصله نصب ۸ برابر طول مؤثر ۵۶ درصد کمتر است از این رو فاصله بین صفحات ۵ برابر طول مؤثر صفحه توصیه می گردد.}, keywords_fa = {Environmental Structures,Triangular Vanes,River Bend,Bank erosion,Distorted River Model}, url = {https://jise.scu.ac.ir/article_14058.html}, eprint = {https://jise.scu.ac.ir/article_14058_fa139599dee8af3b14866e78167a6e68.pdf} } @article { author = {Gazabizadeh, Mahshid and Sabzghabaei, Gholam Reza and Dashti, Soolmaz}, title = {Analysis and Evaluation of Hour-Al-Azim Wetland Conservation Strategies Using SWOT and QSPM Matrix}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {45-59}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.18614.1345}, abstract = {     Wetlands are the intermediate lands between drought and aquatic ecosystems and are the most fertile and most productive ecosystems on earth (Germandy et al., 2008). Management of wetlands for conservation includes the conservation of wetlands from direct human pressures and the maintenance of natural processes in the vicinity of wetland. Monitoring the changes in wetlands and their surrounding lands can be useful for managing these valuable ecosystems (Sabzghabaei et al., 2015). In order to better protect the sustainable development, the necessity of differentiation and recognition of the characteristics of wetlands makes it possible to determine the resources, source of origin, location and factors of their destruction, so that they can be managed with a proper understanding of them. (Lambin and Gist, 2006). If society wants sustainable development in the first stage, we must acquire a complete knowledge of our environment, and in the second stage we must work with strategic planning to maintain it (Jafari, 2015). Strategic planning models are unlimited, but almost all of them are inspired by the SWOT analytical model (Chang and Huang, 2006). From the perspective of this model, an effective strategy will maximize strengths and opportunities and minimize the weaknesses and threats (Ganjali et al., 2014). Hour_ Al_ Azim wetland is located in the common border region of Iran and Iraq in the southwest of Iran and in the county of Dashte Azadegan of Khuzestan province (Behroozirad, 2008). Over the past decade, due to the intensification of human activities, in particular the development of the Azadegan oilfield and the pressures of human societies on the studied wetland, there have been profound changes in the region. This research was conducted with the aim of developing appropriate conservation strategies for Hour_ Al_ Azim wetland.}, keywords = {strategy,Conservation,Hour-Al-Azim Wetland,SWOT,QSPM}, title_fa = {تحلیل و ارزیابی راهبردهای حفاظتی تالاب هورالعظیم با استفاده از ماتریس های SWOT و QSPM}, abstract_fa = {      زیست­بوم­های تالابی، کالاها و خدمات زیست­محیطی متعددی را فراهم می­کنند. امروزه این­گونه سیستم­ها به­دلیل فشار فوق­العاده­ای به­دلیل فشارهای انسانی، افزایش شهرنشینی، صنعتی شدن و رشد بی­رویه کشاورزی و گردشگری نابخردانه و بهره­برداری بیش از حد از منابع طبیعی، با کاهش عملکرد هیدرولوژیکی، اقتصادی و زیست­محیطی مواجه شده­اند. تالاب هورالعظیم به­عنوان یکی از پناهگاه­های حیات وحش و زیست­بوم­های آبی ایران، بدلیل فشارهای وارده بر آن در چند دهه اخیر، با صدمات زیادی مواجه شده است. این تالاب در مرز مشترک ایران و عراق، در جنوب­غربی ایران و در شهرستان دشت­آزادگان از استان خوزستان، واقع شده است. به­منظور حفاظت از تالاب هورالعظیم، مدیریت بهینه منابع و سیاست­های مناسب محیط­زیستی ضرورت دارد. پژوهش حاضر با هدف تدوین برنامه راهبردی حفاظتی در تالاب هورالعظیم در سال 1394 انجام شده است. برای این منظور، در نخستین گام، به شناسایی عوامل داخلی و عوامل خارجی پرداخته شد. سپس عوامل داخلی و خارجی در قالب جداول ارزیابی عوامل داخلی (IFE) و ارزیابی عوامل خارجی (EFE) نمره‌دهی و وزن‌دهی شدند. برای وزن‌دهی عوامل داخلی و خارجی، از فرایند (AHP) و نرم‌افزار Expert choice استفاده گردید. ماتریس عوامل داخلی با امتیاز 58/1، بیانگر این بود که تالاب هورالعظیم دارای نقاط ضعف بیشتری نسبت به قوت­های موجود و عوامل خارجی با امتیاز 82/1، بیانگر وجود تهدیدهای بیشتری نسبت به فرصت­ها بود. نتایج نشان داد در ﻣﺤﺪﻭﺩﻩ مورد ﺑﺮﺭﺳﯽ، به منظور تدوین راهبردی حفاظتی، بر اساس ماتریس SWOT، ﺩﺭ ﺷﺮﺍﯾﻂ تدافعی (ﺍﺳﺘﺮﺍﺗﮋﯼ WT)، و براساس تحلیل QSPM، راهبرد تهیه بانک اطلاعات از میزان و نوع آلاینده‌ها (WT2)، دارای بالاترین اولویت به­دست آمد. بدون تردید شناخت درست و دقیق عوامل تهدیدکننده تالاب­ها، می­تواند زمینه را برای جلوگیری و مقابله اصولی­تر با این عوامل و نیز تهیه و اجرای دقیق طرح­های حفاظتی و مدیریتی زیست­محیطی فراهم آورد.}, keywords_fa = {strategy,Conservation,Hour-Al-Azim Wetland,SWOT,QSPM}, url = {https://jise.scu.ac.ir/article_13914.html}, eprint = {https://jise.scu.ac.ir/article_13914_0cea7699454078cb4deffc8b2b07d4b3.pdf} } @article { author = {Joorabloo, Sanaz and Azhdary, Khalil and Ganji, Zahra and Delghandi, Mehdi}, title = {Climate Change Impact on Reference Evapotranspiration and Precipitation Deficit in Semnan Region}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {61-75}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.19991.1428}, abstract = {In recent years, human activities induced increases in atmospheric carbon dioxide (CO2) which caused global warming and climate change. Climate change is anticipated to cause negative and adverse impacts on water systems throughout the world. Higher temperatures are expected to lead to a host of problems. These include melting snowpack, altering both the intensity and frequency of precipitation, increasing evapotranspiration and else. (Delghandi, 2016). Reference evapotranspiration (ETo) is a key hydrological variable quantifying a major water loss from catchments and basins, which can be used to calculate actual evapotranspiration (ETa), scheduled irrigation and prepare input data for hydrological models. The irrigation water requirement basically represents the difference between the crop water requirement and effective precipitation. The only factors affecting ETo are climatic parameters as water is abundantly available at the reference evapotranspiring surface (Allen et al., 1998). The first of climatic parameters is air temperature. As temperature increases, evapotranspiration also goes up. Some study conducted to indicate climate change impact on ET (e.g, Behmanesh et al., 2015; Sheidaeian et al., 2015; Babaeian and Kouhi, 2012). In this study, climate change impacts on reference evapotranspiration (ETo) and precipitation deficit (PD) were studied from 2010 to 2099 in Semnan region. The objective of this study was to examine the climate change impact on the ETo regarding the uncertainty of Atmosphere-Ocean General Circulation Models (AOGCM) and Greenhouse Gases Emission (GHG) scenarios.}, keywords = {climate change,AOGCM Models,Uncertainty,Reference Evapotranspiration,Precipitation Deficit}, title_fa = {تأثیر تغییر اقلیم بر تبخیر و تعرق گیاه مرجع و کمبود بارندگی در منطقه سمنان}, abstract_fa = {افزایش انتشارگازهایگلخانه­ایدر دهه­های اخیر بر اثر فعالیت­های انسانی، منجر به گرم شدن زمین و تغییرات اقلیم گردیده است. پیش­بینی می­شود، افزایش دمای ناشی از تغییر اقلیم منجر به افزایش تبخیر و تعرق گردد. در این تحقیق، اثر تغییر اقلیم بر تبخیر و تعرق مرجع (ETo) و کمبود بارندگی (PD) در بازه زمانی 2010 تا 2099 در منطقه سمنان بررسی گردید. بدین منظور، برای در نظر گرفتن عدم قطعیت مدل­های AOGCM و سناریوهای انتشار گازهای گلخانه­ای، سناریوهای تغییر اقلیم با استفاده از 14 مدل AOGCM تحت سه سناریوی انتشار گازهای گلخانه­ای (A2، A1B و B1) تولید شد. مقادیر ETo و PD در سه سطح ریسک (25/0، 50/0 و 75/0)، برای سه دوره آینده (2039-2010، 2069-2040 و 2099-2070) و دوره پایه (2000-1971) محاسبه شد و با یکدیگر مقایسه گردید.  نتایج نشان داد، در دوره آتی سوم، بارش­های بهاره کاهش و بارش­های پاییزه و زمستانه افزایش خواهند یافت. هم­چنین مشخص شد که متوسط دما، تبخیر و تعرق پتانسیل گیاه مرجع و کمبود بارندگی تا انتهای قرن روند افزایشی خواهند داشت، که افزایش این پارامترها، در طول ماه های گرم، در مقایسه با ماه های سرد، بیشتر خواهد بود. هم­چنین مشخص گردید، در دوره 2099-2070، متوسط سالانه ETo برای سناریوی A2، A1B و B1 به ترتیب حدود 2/9، 0/8 و 8/5 درصد افزایش می­یابد.}, keywords_fa = {climate change,AOGCM Models,Uncertainty,Reference Evapotranspiration,Precipitation Deficit}, url = {https://jise.scu.ac.ir/article_13753.html}, eprint = {https://jise.scu.ac.ir/article_13753_247a544e34795a4a7d0cd5917d0ac9c6.pdf} } @article { author = {Shams, Shideh and Mousavi, Mohammad and Ali Zadeh, Amin and Shoor, Mahmood and Kamgar-Haghighi, Ali Akbar}, title = {Effects of Elevated Carbon Dioxide and Deficit Irrigation Regimes on Morphological and Physiological Characteristics of Lentil (Variety Kimia)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {77-90}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.19056.1372}, abstract = {Studies have shown that the global climate has been dramatically changed during last decades. The results of the investigations have shown that enhancement of greenhouse gases due to human activities is one of the main factors of climate change in the present century. CO2 is one of the most important greenhouse gases, which has begun to increase rapidly since the mid-19th century. Studies have shown that carbon dioxide concentrations have risen by about 43% from 277-280 ppm since the late 1700s and now the concentration of this gas is close to 400 ppm (Samenow, 2013). According to scientists, carbon dioxide is responsible for 61% of the total global warming. In addition to the harmful effects of increasing the carbon dioxide concentration and global warming, this gas has a positive effect on agriculture, which increases its importance. The results of the research indicate that increasing CO2 concentration causes photosynthesis enhancement also by increasing the photosynthesis dry matter weight increase, and consequently the amount of production increases (Semenow et al., 2012‎). Rogers et al., (1994), indicated that doubling carbon dioxide concentration has led to an increase in plants’ yield approximately by 33%. In addition, environmental conditions such as light, temperature, water and available nutrients, moisture, etc., and the interaction between them, overwhelms the effect of plants on changes in carbon dioxide concentration.}, keywords = {CO2,Stem,Shoot,Root,Seeds Yields,Evapotranspiration}, title_fa = {اثر افزایش دی‌اکسیدکربن و رژیم کم‌آبیاری بر صفات مورفولوژیک و فیزیولوژیک گیاه عدس رقم کیمیا}, abstract_fa = {افزایش غلظت دی‌اکسیدکربن اتمسفری اثر مستقیمی بر فعالیت‌های گیاهی دارد. از سوی دیگر این افزایش می‌تواند اثرات منفی کم آبیاری را تا اندازه‌ای جبران نماید. در این تحقیق به بررسی آثار افزایش غلظت دی‌اکسیدکربن از 400 به 800 و ppm1200 بر رشد و عملکرد گیاه عدس رقم کیمیا تحت چهار تیمار آبیاری (WR (کل نیاز آبی گیاه)، WR125درصد، WR75درصد و WR50درصد) تحت یک آزمایش بلوک کامل تصادفی پرداخته شد. نتایج حاصله نشان داد که افزایش غلظت دی‌اکسیدکربن، افزایش طول ساقه و در نتیجه افزایش جرم خشک ساقه را به همراه دارد. افزایش جرم خشک ریشه نیز از دیگر اثرات افزایش غلظت دی‌اکسیدکربن محیطی می‌باشد. افزایش غلظت دی‌اکسیدکربن افزایش تعداد غلاف‌ها و دانه‌ها در بوته را موجب می‌شود. همچنین جرم خشک 1000 دانه نیز افزایش می‌یابد. در نتیجه عملکرد دانه در هر بوته گیاه عدس افزایش می‌یابد، به‌نحوی که دو و سه برابر شدن غلظت دی‌اکسیدکربن موجب افزایش 17 و 32 درصدی عملکرد دانه می‌شود. از سوی دیگر افزایش غلظت دی‌اکسیدکربن موجب کاهش میزان تبخیر-تعرق می‌شود، لذا از نیاز آبی گیاه کاسته شده و در نتیجه از اثرات منفی کم آبیاری بر رشد و عملکرد گیاه می‌کاهد.}, keywords_fa = {CO2,Stem,Shoot,Root,Seeds Yields,Evapotranspiration}, url = {https://jise.scu.ac.ir/article_13910.html}, eprint = {https://jise.scu.ac.ir/article_13910_3f4d91d42b571ec0e0bcd98129ab3434.pdf} } @article { author = {Gheisouri, Morteza and Soltani-Gerdefaramarzi, Somayeh and Ghasemi, Mohsen}, title = {Assessment of Meteorological and Hydrological Drought and its Effect on Water Quality: (Case Study: Godarkhosh River)}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {91-105}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.20927.1499}, abstract = {Drought is a natural phenomenon that causes water resources shortage in various sectors such as drinking water, industry and agriculture. Drought is one of the climatic phenomena that can be observed not only in arid and semi-arid regions, but also alternately in wet areas. It should be noted that aridity and drought are different, aridity is a climatic trait specific to arid and semi-arid regions and is a permanent feature of the climate of the dry region (Eslamian et al, 2012). Liu et al (2011) with the study of meteorological and hydrological droughts in Oklahoma State discovered the two-day drought incidence of 2 months and the correlation coefficient between SPI and SDI profiles in an optimal state was 0.63. Eskandari-Damaneh (2015) investigated temporal and spatial relationships between meteorological and hydrological droughts in Tehran province. The results showed a correlation of 99% between meteorological and hydrological droughts and the increasing trend of drought in Tehran province. Mahmoudi et al. (2015) assessed the drought of meteorology in Sistan and Baluchestan Province using a standard score index and its impact on water quality in the province. Delpla et al (2009) examined the impact of climate change on the quality of surface waters in relation to drinking water production and concluded that climate change has reduced the quality of drinking water that has potential health impacts. Also, Mosley (2015) indicated that drought increased salinity, algae and soluble ions, which greatly reduced the quality of freshwater. According to drought studies, the main objective of this study is to study the drought of meteorology and hydrology, as well as to determine the probable delay between the occurrence of these two types of drought and their impact on river water quality, for water resources management in Godarkhosh basin which is one of the most important basins in Ilam province.}, keywords = {Drought,İndexes,Hydrological,Delay,water quality}, title_fa = {ارزیابی خشکسالی هواشناسی و هیدرولوژیک و تأثیر آن بر کیفیت آب (مطالعه موردی: رودخانه گدارخوش)}, abstract_fa = {خشکسالی یک پدیده طبیعی است که باعث کمبود منابع آب در بخش­های مختلف شرب، صنعت و کشاورزی می­شود. این پدیده در مقایسه با سایر بلایای طبیعی از نظر شدت وقوع و هم از نظر میزان خساراتی که به بار می­آورد، از اهمیت بیشتری برخوردار است. تحقیق حاضر به‌منظور بررسی خشکسالی هواشناسی و هیدرولوژیکی و تأثیر آن بر کیفیت آب رودخانه گدارخوش واقع در استان ایلام در طول بازه­ی زمانی 1365 تا1391، صورت پذیرفته است. بدین منظور از آمار 26 ساله دما و بارش دو ایستگاه هواشناسی، داده دبی و کیفیت آب یک ایستگاه آب­سنجی در خروجی حوضه گدارخوش استفاده شد. هم­چنین شاخص جریان کمQ90  و شاخص هواشناسی SPI، شاخص خشکسالی هیدرولوژیک SDI در 5 بازه زمانی (3، 6، 12، 24، 48 ماهه) محاسبه گردید. نتایج بررسی خشکسالی هواشناسی و هیدرولوژیک حاکی از افزایش شدت و تداوم خشکسالی‌ها به ویژه خشکسالی هیدرولوژیک در سال­های اخیر و وجود تأخیر زمانی 12 ماهه بین وقوع خشکسالی هواشناسی و هیدرولوژیک بوده است. مقایسه دوره­های خشکسالی هواشناسی و هیدرولوژیک بر اساس شاخص­های SPI و SDI نشان می­دهد که حدود 55 درصد خشکسالی­های هیدرولوژیک در زمان خشکسالی­های هواشناسی که بارندگی­ها شرایط نرمالی را نداشته­اند، اتفاق افتاده است. هم­چنین بر اساس شاخص­های SPI و Q90 دوره­های مشترک خشکسالی هواشناسی و هیدرولوژیک 11 ماه می­باشد. در بررسی تغییرات فوق بر کیفیت آب رودخانه نتایج نشان داد که کاهش دبی رودخانه در اثر خشکسالی و افزایش دما باعث افزایش مقدار آنیون‌ها شامل سولفات، کلر و بیکربنات در سال­های خشک نسبت به میانگین دوره آماری، به میزان 09/4 درصد و میزان کاتیون‌ها شامل سدیم، کلسیم و منیزیم به میزان 04/8 درصد شده است. در سایر پارامترهای کیفی ازجمله هدایت الکتریکی، املاح محلول و نسبت جذب سدیم به ترتیب 24/0، 17/0 و 88/5 درصد افزایش مشاهده گردید ولی براساس نمودار شولر کیفیت آب تقریباً در محدوده قابل قبول می­باشد.}, keywords_fa = {Drought,İndexes,Hydrological,Delay,water quality}, url = {https://jise.scu.ac.ir/article_13921.html}, eprint = {https://jise.scu.ac.ir/article_13921_bfe6f87da77b7804fd2dfa478fdf3c1a.pdf} } @article { author = {Akbarzadeh, Ali and Shahnazari, Ali and Ziatabar Ahmadi, Mir Khalegh and Akbarzadeh, Mohammad}, title = {Effect of Different İrrigation Regimes on Quantitative and Qualititative Characteristics of Peppermint Medicinal Plant}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {107-118}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.21315.1532}, abstract = {Regulated Deficit Irrigation (RDI) is the strategy of reducing irrigation rates, during a specific period of growth and development, with the objective of conserving water and managing plant growth while maintaining or improving yield and quality. Partial root zone drying (PRD) is a possible irrigation technique that deliberately exposes the plant to water deficits to induce physiological responses that can improve the efficiency of water use. It involves irrigating only one part of the root zone in each irrigation event, leaving another part to dry to certain soil water content before rewetting by shifting irrigation to the dry side. Various plants are different in economic efficiency of irrigation water used. Medicinal plants, as a collection of plants with high economic value, can produce more capital than other plants in terms of water scarcity. The objective of this study was to determine the response of peppermint yield components, oil yield, and water use efficiency to regulated deficit irrigation and partial root-zone drying in field condition.}, keywords = {Drought stress,Irrigation management,Field Capacity,Harvest index,Essential oil yield}, title_fa = {اثر سطوح مختلف آبیاری بر صفات کمی و کیفی گیاه دارویی نعناع فلفلی}, abstract_fa = {به‌منظور بررسی اثر اعمال کم‌آبیاری تنظیم‌شده و آبیاری ناقص ریشه بر صفات کمی و کیفی گیاه دارویی نعناع فلفلی (Mentha piperita L.)، آزمایشی در طی یک فصل زراعی و در دو چین اجرا شد. تیمارهای آزمایش شامل کم‌آبیاری تنظیم‌شده در پنج سطح 100 (شاهد)، 85، 70، 55 و 40 درصد رطوبت قابل استفاده گیاه و آبیاری ناقص ریشه در سه سطح 70، 55 و 40 درصد رطوبت قابل استفاده گیاه، در نظر گرفته شد. میزان آب آبیاری از طریق تفاوت رطوبت قبل آبیاری و ظرفیت زراعی در تیمار آبیاری شاهد محاسبه شد. رطوبت خاک با استفاده از دستگاه TDR اندازه‌گیری شد. بیشترین عملکرد خشک بوته و عملکرد اسانس، در چین اول به‌ترتیب در تیمار شاهد و 70 درصد آبیاری ناقص ریشه، به‌میزان 1942 و 67/23 کیلوگرم در هکتار به‌دست آمد. در چین دوم، عملکرد تر و خشک بوته تحت‌تاثیر اعمال تیمارهای کم‌آبیاری قرار نگرفت، در‌حالی‌که عملکرد اسانس و شاخص برداشت اسانس در تیمارهای آبیاری ناقص ریشه به‌صورت معنی‌داری افزایش یافت.}, keywords_fa = {Drought stress,Irrigation management,Field Capacity,Harvest index,Essential oil yield}, url = {https://jise.scu.ac.ir/article_13931.html}, eprint = {https://jise.scu.ac.ir/article_13931_bcf405dc84edd9be876ed7e3fcffe95d.pdf} } @article { author = {Azad, Nasrin and Rezaei Abajelu, Elnaz and Behmanesh, Javad}, title = {Locating the Potential Areas for executing Surface and Pressurized Irrigation Systems Using Fuzzy Analytical Hierarchy Process Method in Myandoab Plain}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {119-132}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.17257.1253}, abstract = {Feasibility and evaluation of the most appropriate regions for executing different irrigation systems according to water quantity and quality is of great importance, and prevents energy, credits and resources losses. In this research, using the fuzzy analytical hierarchy process method (FAHP), the possibility of execution of different irrigation systems (surface, sprinkler and drip systems) was evaluated based on the quantity and quality of groundwater in Miandoab plain. In this order, the effective qualitative and quantitative criteria which is needed to execute each of the three irrigation systems were determined and point values for each effective parameter in the decision were interpolated and zoned by geo statistical method. Then by turning of raster data layers into fuzzy mode using fuzzy membership functions and calculating relative importance weights of the criteria using Analytical Hierarchy Process (AHP) method, the above-mentioned layers were combined and the final layer of suitable areas for water harvesting at the three irrigation systems were identified. The zoning maps of Miandoab plain restrictions in different surface and pressurized irrigation systems execution showed that 32.32, 19.02 and 51.89 percent of the total areas of the plain has serious and very high restriction in surface, sprinkler and drip irrigation systems respectively.}, keywords = {Fuzzy Analytical Hierarchy Process method (FAHP),Surface irrigation,Pressurized irrigation,Locating,Myandoab}, title_fa = {مکان یابی مناطق مستعد اجرای سیستم‌های آبیاری سطحی و تحت فشار با استفاده از فرایند تحلیل سلسله مراتبی فازی در دشت میاندوآب}, abstract_fa = {امکان­سنجی و بررسی مناسب­ترین مناطق اجرای سیستم­های مختلف آبیاری، با توجه به کمیت و کیفیت آب، دارای اهمیت زیادی بوده و از اتلاف انرژی، سرمایه و هدر رفت منابع جلوگیری می­کند. در این پژوهش با استفاده از فرایند تحلیل سلسله مراتبی فازی (FAHP)، امکان اجرای سیستم­های مختلف آبیاری (سطحی، بارانی و قطره­ای) در دشت میاندوآب با توجه به کمیت و کیفیت آب زیرزمینی مورد بررسی قرار گرفت. بدین منظور معیارهای کمی و کیفی تأثیرگذار در اجرای هر یک از روش­های آبیاری تعیین و توسط روش­های زمین­آماری پهنه­بندی شدند. سپس با فازی نمودن لایه­های رستری معیارها و محاسبه وزن اهمیت نسبی آن­ها با استفاده از روش AHP، در نهایت این لایه­ها پس از تأثیر وزن­ها با هم ترکیب شده و لایه نهایی مناطق مستعد استحصال آب تهیه گردید. نتایج بررسی نقشه­ها نشان داد که در روش­های آبیاری سطحی، بارانی و قطره­ای به­ترتیب 32/32، 02/19 و 89/51 درصد از محدوده دشت دارای محدودیت جدی و خیلی زیاد جهت اجرای سیستم آبیاری مربوطه می­باشند.}, keywords_fa = {Fuzzy Analytical Hierarchy Process method (FAHP),Surface irrigation,Pressurized irrigation,Locating,Myandoab}, url = {https://jise.scu.ac.ir/article_13911.html}, eprint = {https://jise.scu.ac.ir/article_13911_72f1aca5c79bb0b45fcaac6a83b0fe2a.pdf} } @article { author = {Nikpour, Mohammad Reza and Sanikhani, Hadi and Mahmodi Babelan, Sajad and Nastarani Amuqin, Saeid}, title = {Daily Rainfall – Runoff Modeling of Darreh-Rud River in Ardabil Province, Iran}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {133-146}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.21053.1508}, abstract = {Rainfall- runoff is one of the most complicated hydrological processes that is affected by various physical and hydrological variables. Therefore, understanding and predicting runoff formation processes and their transfer to the outlet point of the watershed is one of the most important issues of hydrological sciences (Salajegheh et al., 2009). Botsis et al., (2011) simulated daily rainfall-runoff of a catchment in the California, USA. They compared the performance of SVM with three types of kernel function with ANN. Finally, the SVM had a more accurate simulation of rainfall-runoff. Nourani et al., (2009) applied the hybrid of wavelet-ANN to model rainfall-runoff of Lighvan-Chay basin in Iran. The results showed that the proposed model is capable to predict long-term and short-term rainfall events due to the use of the time series with multiple scales as input layer of ANN. Darreh-rud river as the most important branch of Aras border region in Iran, is one of the main rivers of Ardabil province and the main source of water supply in different parts of the province. On the other hand, the Emarat reservoir dam is under construction on the river. Therefore, ANN, WNN, GEP and LS-SVM models were evaluated for estimating the inflow of Emarat dam (located on Darreh-rud river, Ardabil province).}, keywords = {Gene Expression programming,Estimation of Streamflow,Least-squared Support Vector Machines,Artificial Neural Networks,Hybrid of Wavelet-ANN}, title_fa = {مدل سازی بارش – رواناب روزانه رودخانه دره رود واقع در استان اردبیل}, abstract_fa = {مدل‌سازی بارش- رواناب یکی از پراهمیت‌ترین موضوعات در مدیریت منابع آب‌های سطحی برای اتخاذ تدابیر مناسب در مواقع سیلاب و بروز خشک‌سالی‌ها است. در این تحقیق از مدل‌های شبکه­های عصبی مصنوعی، برنامه­ریزی بیان ژن، موجک- عصبی و حداقل مربعات ماشین بردار پشتیبان به­منظور تخمین جریان روزانه رودخانه دره­رود استفاده شد. داده‌های دبی و بارش روزانه ایستگاه مشیران واقع بر رودخانه مذکور و در بالادست سد عمارت به­کار گرفته شد. نتایج نشان داد که الگوی تعریف شده بر اساس دبی روز قبل و بارش همان روز می­تواند بهترین برآورد را از رواناب روزانه داشته باشد. هم­چنین نتایج بیانگر عملکرد قابل قبول مدل­ها و برتری مدل موجک- عصبی با بیشترین ضریب همبستگی (952/0=R)، کمترین ریشه میانگین مربعات خطا (589/1=RMSE) و ضریب نش ساتکلیف برابر 905/0 در مرحله صحت­سنجی بود. در برآورد دبی بیشینه نیز مدل مذکور با میانگین خطای نسبی 97/25 درصد، از خطای کمتری نسبت به سایر مدل­ها برخوردار بود.}, keywords_fa = {Gene Expression programming,Estimation of Streamflow,Least-squared Support Vector Machines,Artificial Neural Networks,Hybrid of Wavelet-ANN}, url = {https://jise.scu.ac.ir/article_13922.html}, eprint = {https://jise.scu.ac.ir/article_13922_cde1fce58524dc774576b43c6db55e58.pdf} } @article { author = {Farajzadeh, Fateme and Fathi, Ahmad}, title = {Examination of the Effect of Cubic Artificial Roughness Density inInclined Channel on Downstream Scour Depth}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {147-159}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.20367.1462}, abstract = {Water passage from  steep slopes in river engineering issues and the design of water transfer structures is inevitable. Because of the steep slope of the surface, the surface velocity and surface erosion rates are high. Energy control in high-speed flows is one of the challenges of designing hydraulic structures. These flows, for example, occur in places such as dam overhead structures, drainage systems of urban areas and Mountain Rivers with a steep slope. One of the ways to reduce dimensions or eliminate energy depreciating structures is to use methods to reduce the kinetic energy of flow over the weir, including using of stairs or blocks on the overflow. The use of large-sized stairs or blocks will cause the passing jets of flow to be separated and as a result turbulent, which can effectively deplete the kinetic energy of the current. The problem with using a staircase or block is a huge cost of built and a high risk of cavitation. Another method of energy depreciation is to apply roughness at the overflow bed, which may be an efficient way to reduce energy. Roughness can dramatically reduce the flow turbulence, and thus reduces the risk of cavitation. Also, roughness can reduce the flow power over the overflow and reduce the depth of the lower erosion pit by removing or reducing the dimensions of the relaxation basin. Most studies in this field have investigated the effect of these roughs on the amount of energy depletion, which in addition to energy depletion is also important for lowering the erosion of the structure. However, for the economic design of hydraulic structures, designers need to have full knowledge of the particle mechanics and the dimensions of the scour hole, so that they can consider the requirements for the stability of the structure, which has so far been  investigated insufficiently. Therefore, the present study aimed to investigate the effect of roughness density on sloped bed surface on its downstream scour depth.}, keywords = {Artificial Roughness,Scour,Energy Depreciation,Inclined Channel}, title_fa = {بررسی تأثیرتراکم زبری های مصنوعی مکعبی برآب‌راهه شیبدار روی عمق آبشستگی پایین دست آن}, abstract_fa = {عبور آب از شیب­های تند در مسائل مهندسی رودخانه و طرح سازه­های انتقال آب امری اجتناب ناپذیر است. به دلیل شیب تند بستر عمدتاً سرعت جریان ونرخ فرسایش سطحی بالا می­باشد. لذا توسعه حفره آبشستگی در پایین دست سازه­های انتقال آب که منجر به تخریب خود سازه می­گردد از دیر باز مورد توجه محققین بوده است.در این تحقیق، یک مدل آزمایشگاهی شامل سرریز با ارتفاع 60 سانتی‌متر وطول 180 سانتی مترساخته شد. سطح بستر سرریز پوشیده از زبری­های مصنوعی مکعبی در سه تراکم 5، 10 و15 درصد و آبشستگی داخل حوضچه در4 عدد آبشار مختلف از 0008/0 تا 003/0 بررسی شد. نتایج حاکی از آن است که در یک عدد آبشار ثابت با افزایش تراکم زبری­ها قدرت جریان عبوری از آبراهه شیبدار به دلیل مقاومت برشی تضعیف می­گردد. از این رو با تاثیرگذاری زبری بر کاهش قدرت گردابه­های بوجود آمده در جریان پرش هیدرولیکی پایین­دست آبراهه شیبدار از میزان عمق آبشستگی کاسته می­شود. در صورت افزایش تراکم به میزان 15 درصد عمق آبشستگی در عدد آبشار حداکثر 30 درصد کاهش می­یابد که این میزان کاهش در تراکم 5 درصد به حداکثر 10 درصد می­رسد.}, keywords_fa = {Artificial Roughness,Scour,Energy Depreciation,Inclined Channel}, url = {https://jise.scu.ac.ir/article_13930.html}, eprint = {https://jise.scu.ac.ir/article_13930_51ddc8ccdf027a22fbdb51f0c0954e0a.pdf} } @article { author = {Ramezani, Masoumeh and Babazadeh, Hossein and Sarai Tabrizi, Mehdi}, title = {Simulating Barley Yield under Different Irrigation Levels by using AquaCrop Model}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {161-172}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.20215.1452}, abstract = {As the population grows and people's living standards rise, the global demand for freshwater is constantly increasing. Agriculture is not only the largest consumer of water in the world, but also one of the cheapest and least efficient consumers with the highest subsidy rates. Nowadays, optimal management of irrigation water is very essential issue and valuable tools calls irrigation management models to improve for this optimizing and Facilitating. For this purpose, the two-year 2004-2005 & 2005-2006 experiment to determine the accuracy of the simulation AquaCrop model calibration and AquaCrop indices barley crop was in Darab-IRAN. Many countries, especially those located in arid and semi-arid areas, need water to produce agricultural products, and many of our country's crops and gardens are also cultivated in the water.}, keywords = {Aquacrop model,Dry Matter,Evapotranspiration,Soil Moisture,Water productivity}, title_fa = {شبیه‌سازی عملکرد جو در سطوح مختلف آبیاری با مدل AquaCrop}, abstract_fa = {امروزه مدیریت بهینه آب آبیاری بسیار ضروری می­باشد و ابزارهای ارزشمندی به نام مدل‌های مدیریتی آبیاری این بهینه‌سازی را تسهیل کرده و بهبود بخشیدند. بدین‌منظور، در آزمایشی دو ساله 84-1383 و 85-1384به واسنجی مدل  AquaCropو بررسی دقت آن در شبیه­سازی شاخص‌های محصول جو در منطقه داراب پرداخته شد. واسنجی مدل از طریق مقایسه­ی نتایج حاصل از مطالعات صحرایی و شبیه‌سازی انجام شد. داده­های اندازه­گیری شده در سال اول برای واسنجی مدل و در سال دوم برای اعتبارسنجی مورد استفاده قرار گرفتند. مقادیر ماده خشک قسمت هوایی گیاه شبیه‌سازی شده توسط مدل با شاخص­های آماریd و NRMSEدر سال اول کشت به‌ترتیب برابر 982/0 و 094/0 و در سال دوم 935/0 و 198/0 و مقدار عملکرد دانه برآورد شده توسط مدل در سال اول کشت به‌ترتیب برابر 981/0 و 172/0 و در سال دوم برابر 992/0 و 103/0 بود. نتایج آزمون‌های آماری نشان دادند که مدل AquaCropاز دقت بالایی برخوردار بوده است.}, keywords_fa = {Aquacrop model,Dry Matter,Evapotranspiration,Soil Moisture,Water productivity}, url = {https://jise.scu.ac.ir/article_13923.html}, eprint = {https://jise.scu.ac.ir/article_13923_ea43280cfd15c7b09cdb20109815b15b.pdf} } @article { author = {Moradi, Sobhan and Esmaili, Kazem and Khodashenas, Saeid Reza}, title = {Evaluation of the Time Development of Scour Around Pipelines With Optimization the Mounting Position of Piggyback-Line}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {173-187}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.18834.1361}, abstract = {Protection of water pipelines - wastewater or fuel materials - on the bed of erosion of the sea and rivers against such factors as bending, slipping and even fracture are important and costly issues in ocean engineering. In order to protect the potential destruction and fracture of these pipelines due to hydrodynamic forces of flow-waves or human activities. It is necessary to be covered with a concrete-coat or buried at an appropriate depth of bed with trenching.Objective observations showed that the pipelines that are located on the erosion bed of the sea and the rivers have the potential to produce a natural burial (self-burial pipe) in a bed of sediment, due to localized scouring.But in natural conditions, the burial process takes place with little speed. Therefore, by installing the spoiler on the pipelines, it is attempting to increase the Perpendicular cross-section of the flow (making changes in the pattern of flow around the pipeline) and, finally, the occurrence of erosion and self-burial inlower environmental velocities, but more intense. Therefore, it is necessary to first investigate the factors affecting for erosion sediment bed and estimate the dimensions of scour hole under pipelines, to study the accelerating factors and its effects on ocean engineering. Themost of researchers considered the local scouring around the pipelines relatede to be rapid, the depth of the flow, the pipe diameter and the particle size of the bed. Moncada-M and Aguirre-Pe (1999) describe that, the scour depth below the pipeline as a function of the flow loss number and the dimensionless distance between the pipe and the intact bed. Cheng and Chew (2003) and Zhao and Wang (2009), by simulating the flow area around the pipeline with the mounted fin on it, found that the lifting force and shear stress in the bed and the scour depth increased with the fin. (2012), by using laboratory results, showed that the flow loss number and the height of the fin had a significant effect on the depth of scouring under the horizontal pipelines. Shan et al. (2015) with numerical evaluation of self-burial of tube with the fin mounted on it, and in displacement mode, with Fluent software, found that increasing the flow loss number in near of the bed would help to increase the burial speed of the tube. recently studies showed that the mounting of the fins on the pipeline lead to increasing the amount of erosion around the tube. The application of mounted Piggyback line with cross sectional and different angles on the main pipelines can be a major difference with previous research.}, keywords = {Tunnel erosion,Scour,Piggyback-line,pipeline}, title_fa = {بررسی توسعه زمانی آبشستگی اطراف خطوط لوله با بهینه‎یابی موقعیت نصب پیگیبک‎لاین}, abstract_fa = {حفاظت از خطوط لوله انتقال َآب- فاضلاب و یا مواد سوختی، روی بستر فرسایشی دریا و رودخانه‎ها در برابر عواملی چون خمش، لغزش و حتی شکستگی از مسائل مهم و پرهزینه در مهندسی دریا بحساب می‎آید. مشاهدات عینی نشان داد، خطوط لوله که بر بستر فرسایشی دریا و رودخانه‎ها قرار گرفته، در اثر آبشستگی موضعی ایجاد شده، دچار دفن طبیعی(خوددفنی لوله) در بستر رسوبی می‎شود. اما در شرایط طبیعی فرآیند دفن با سرعت کمی اتفاق می‎افتد. از اینرو با نصب زائده‎ای روی خطوط لوله، سعی در افزایش سطح مقطع عمود بر جریان(ایجاد تغییرات الگوی جریان در اطراف خط لوله) و نهایتاً وقوع فرسایش در سرعت‎های محیطی کمتر و با شدت بیشتر می‎باشد. مطالعات پیشین نشان می‎دهد که نصب باله در بالای خط لوله، سبب افزایش مقدار فرسایش در اطراف لوله می‎شود. کاربرد پیگیبک‎لاین(Piggyback line) نصب شده با شکل مقطع و زوایای‎ متفاوت، روی خطوط لوله اصلی می‎تواند تفاوت عمده‎ای با تحقیقات انجام شده قبلی داشته باشد. در پژوهش حاضر، به روش پای-باکینگهام(Pi-Bukingham) تمامی متغیرهای تأثیرگذار بر ابعاد آبشستگی موضعی زیر خطوط لوله، تحلیل ابعادی شده است. و تأثیر پارامترهای بدون بعد بدست آمده مورد بررسی و تحلیل قرار گرفته است. نتایج آزمایشگاهی حاکی از آن است که، آبشستگی لوله به همراه پبگببک‎لاین تا 2 برابر نسبت به لوله ساده افزایش یافته است. پیگیبک‎لاین با شکل مقطع مثلثی، برای افزایش مقدار عمق حداکثر آبشستگی در زاویه نصب منفی 135 درجه، دارای بهترین عملکرد بوده است. و در بستر ریزدانه بطور میانگین تا 4 برابر و در بستر درشت‎دانه بطور میانگین تا 6 برابر عمق آبشستگی را نسبت به حالت لوله ساده افزایش می‎دهد.}, keywords_fa = {Tunnel erosion,Scour,Piggyback-line,pipeline}, url = {https://jise.scu.ac.ir/article_13912.html}, eprint = {https://jise.scu.ac.ir/article_13912_ea190e26d8b254507a9968f23695b5fb.pdf} } @article { author = {Karimi-Naghoni, Saber and Lashkarara, Babak and Najafi, Leila}, title = {Canal Seepage Control by Soil Combined With Sodium Carbonate and Molasses}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {189-200}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.20418.1469}, abstract = {Seepage reduction in earth canals is a practical way for maintaining available water resources. The use of proper and inexpensive materials is a practical way for decreasing seepage losses in canals. Experiments showed that seepage in small channels and field canals is usually more than conveyance canals. One of the most important factors for determining seepage rate is permeability of constituent materials of bed and sidewall of canal, which depends on porosity size. Smaller porosity size results in less permeability, which is proportion to squared diameter of the porosity USBR (1963). Garg and Chawla (1970) showed the seepage rate is high in unlined canals. Aylward and Newton (2006) determined water losses rate to be 25% in an earth canal with 82 km length and found water losses volume to be 11.9 million cubic meter along a period of 210 days of irrigation season. The results showed that water losses decreased by 30% through 45% by controlling seepage and also water losses in the canal are directly proportional to permeability. The purpose of this research is to introduce an economic lining in order to reduce seepage losses of four-degree irrigation canals and increase their water conveyance efficiency. Hence, it is recommended to use sodium carbonate and sugarcane and sugar beet factory waste instead of use of heavy machinery for compacting of soil.}, keywords = {Canal Lining,Soil Hydraulic Conductivity,Clay Dispersion,Sodic Soils}, title_fa = {کنترل نشتِ کانال با ترکیب خاک-کربنات دوسود و ملاس}, abstract_fa = {در این پژوهش به­منظور افزایش راندمان انتقال آب در کانال‌های خاکی، یک پوشش ارزان قیمت معرفی شده است. برای این منظور آستردهی کانال‌های خاکی با استفاده از کربنات دوسود و ملاس نیشکر مورد بررسی قرار گرفته است. ترکیب نمک دوسود با خاک منجر به واگرائی ذرات رس، کاهش خلل و فرج و در نهایت کاهش نفوذپذیری در آن می‌شود. در این تحقیق با توجه به میزان درصد رس در نمونه‌های خاک، اثر میزان به‌کارگیری درصدهای مختلف (2 الی10) کربنات دوسود بر میزان نشت مورد بررسی قرار گرفت. نتایج نشان داد که حداقل میزان نفوذپذیری از ترکیب کربنات دو سود با نمونه‌ی خاکِ با بافت سیلت-لومی (با 10 درصد رس) از ترکیب 8 درصد وزنی کربنات دو سود محقق می‌گردد. مشاهدات نظیر نشان داد که درصد مورد نیاز کربنات دوسود برای دستیابی به حداقل نفوذپذیری در خاک‌های با بافت لومی (با 15 و 20 درصد رس) و در خاک با بافت سیلت- رسی- لومی (با 30 درصد رس) به 10 درصد افزایش می‌یابد. آزمایش‌ها نشان داد که با کاهش میزان رس در نمونه‌های مورد بررسی، عوارض ناشی از به‌کارگیری کربنات دوسود و متلاشی شدن ساختمان خاک، باید خاک از نقطه‌نظر پایداری و فرسایش آبی اصلاح شود. به منظور تثبیت ذرات متلاشی شده خاک و افزایش زاویه اصطکاک داخلی ذرات از ملاس نیشکر استفاده شده است. بررسی نتایج نشان داد که روند تغییرات میزان ملاس مصرفی در نمونه‌های اشباع مورد آزمون، تحت شرایط بهینه 6 الی 10 درصد وزنی، بسته به­میزان رس نمونه تغییر می‌یابد. به­منظور کنترل فرسایش آبی، سطوح نمونه پس از ترکیب با گوگرد، به وسیله غلطک داغ اتوکشی گردید. تجربه‌های ناشی از آزمون‌های مختلف در این پژوهش نشان داد که اتو زدن سطوح جداره کانال با غلطک داغ پس از ترکیب با حداقل 2 درصد گوگرد منجر به ایجاد یک لایه جوشنی در سطوح نمونه شده و این امر منجر به افزایش مقاومت خاک در مقابل فرسایش آبی خواهد شد. علاوه بر آن به‌کارگیری گوگرد منجر به دفع حشرات و جانوران موزی شده و در صورت انحلال با جریان و انتقال به درون مزرعه می‌تواند به‌عنوان یک ماده ساده مغذی نقش مفیدی را ایفاء نماید.}, keywords_fa = {Canal Lining,Soil Hydraulic Conductivity,Clay Dispersion,Sodic Soils}, url = {https://jise.scu.ac.ir/article_13913.html}, eprint = {https://jise.scu.ac.ir/article_13913_6a7615888dd25fe4fdc00e3d96ffd81b.pdf} } @article { author = {Rahmanshahi, Mostafa and Fathi-Moghadam, Manoochehr and Haghighi, Ali}, title = {Numerical Simulation of Dynamic Phenomena of Unsteady Friction and Viscoelastic Effects in Pipeline under the Transient Flow}, journal = {Irrigation Sciences and Engineering}, volume = {41}, number = {4}, pages = {201-216}, year = {2018}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.22737.1623}, abstract = {     Plastic pipes are widely used in pressurized water systems. The analysis of transient flow and estimation of maximum and minimum pressure wave propagation in pipeline and pipe networks is required for design and practice of piping systems, pumping stations, and dam water conveyance tunnels. The viscoelastic properties of the polyethylene pipes have significant effect on the estimation of pressure wave speed and attenuation in transient flow. The use of polymeric pipes such as polyethylene and polyvinyl chloride has recently increased due to their technical and economic advantages over steel and concrete pipes. Due to viscoelastic behavior, polymeric pipes have a significant impact on transient flows (Pezzinga, 2002). In a fast transient flow event like water hammer, viscoelastic properties of polymeric materials cause a residual stress in the pipe wall. These deformations will not return to their original state immediately after unloading (Covas, 2003). This viscoelastic behavior also affects the intensity, shape, and dampening of pressure oscillation in transient flows. Covas (2003) developed a numerical model to simulate the viscoelastic behavior of the pipe wall in transient flow events. In this study, the results of a linear viscoelastic model were compared with experimental results in the presence and absence of unsteady friction loss. Soares et al., (2008) also considered transient flow in PVC pipes, and their results were in good agreement with those obtained by Ramos et al. (2004). Evangelista et al., (2015) studied water hammer phenomenon in a Y-shaped system both experimentally and numerically. According to their results, the linear viscoelastic model was able to simulate the water hammer phenomenon in this system. The present research deals with the introduction and simulation of dynamic effects, including unsteady friction and pipe-wall viscoelastic in transient flows in polymeric pipes that widely used in water works. Accordingly, the governing equations are rewritten and manipulated for considering the unsteady friction and viscoelastic properties. The equations are then solved using the method of characteristics coupled with the finite difference method. Appling the inverse transient analysis method and with the aid of a genetic algorithm, the unknown parameters are determined. Steady state friction coefficients have to be estimated based on steady state data and other unknown parameters were calibrated based on the transient flow.}, keywords = {Transient flow,Viscoelastic pipeline,Unsteady friction,Numerical model,Invers solution}, title_fa = {مدل‏سازی عددی پدیده های دینامیکی افت غیرماندگار و اثرات ویسکوالاستیک در خطوط لوله تحت جریان گذرا}, abstract_fa = {رفتار ویسکوالاستیک لوله­های پلیمری در مرحله طراحی و هم‏چنین برای تحلیل سیگنال ضربه­قوچ با اهداف تشخیصی، باید در نظر گرفته شود. تحقیق حاضر به معرفی و مدل­سازی اثرات دینامیکی افت غیرماندگار و ویسکوالاستیک دیواره لوله­های پلیمری رایج در کارهای آبرسانی، در جریان­های گذرا می­پردازد. بر این اساس معادله‏های سازگاری بر اساس افت غیرماندگار و خواص ویسکوالاستیک دیواره لوله بازنویسی شده و با به­کارگیری روش خطوط مشخصه در ترکیب با تفاضل محدود تحلیل می­شوند. برای واسنجی پارامترهای مجهول نظیر ضرایب افت و خزش و صحت­سنجی مدل عددی توسعه یافته، از داده­های یک مدل آزمایشگاهی استفاده شد. با به­ کارگیری روش تحلیل معکوس جریان گذرا و استفاده از الگوریتم ژنتیک، پارامترهای مجهول مسئله محاسبه می­شوند. نتایج نشان می­دهد که مدل­های کلاسیک ضربه قوچ قادر به شبیه­سازی نوسانات فشار در لوله­های پلیمری نمی­باشند. هم‏چنین اثرات ویسکوالاستیک نقش بسیار مهم­تری نسبت به افت غیرماندگار در شکل­گیری سیگنال­های ضربه قوچ بازی می­کنند، تاجایی که در نظر گرفتن آن به­تنهایی می­تواند به پاسخ­های قابل قبولی منتج شود.}, keywords_fa = {Transient flow,Viscoelastic pipeline,Unsteady friction,Numerical model,Invers solution}, url = {https://jise.scu.ac.ir/article_14062.html}, eprint = {https://jise.scu.ac.ir/article_14062_fd53388ad876af09f08944523b00c4a1.pdf} }