@article { author = {Ramezani Etedali, H. and Ebrahimian, H. and Abbasi, F. and Liaghat, A. M.}, title = {Evaluation of EVALUE, SIPAR_ID and INFILT Models for Estimating of Kostiakov infiltration parameters in Furrow Irrigation}, journal = {Irrigation Sciences and Engineering}, volume = {35}, number = {1}, pages = {1-10}, year = {2012}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {}, abstract = {Estimationof infiltration parameters is very difficult in furrow irrigation while theyhave very important effect in design and evaluation of surface irrigationsystems. There are different methods for estimating infiltration parametersbased on mathematicalmodels such as EVALUE, SIPAR_ID and INFILT. EVALUE model uses direct solutionwhereas two other models are based on inverse solution. The objective of thisstudy is to evaluate these models to estimate infiltration parameters in furrowirrigation. Twelve data sets of experimental blocked-ended and free drainingfurrows were used in this assessment. The data sets were under different conditions, e.g. length, slope, andflow regime. Using the estimatedinfiltration parameters, the total infiltrated volume was predicted to evaluatethe accuracy of the mathematical models. The results indicated that EVALUE andSIPAR_ID provided the lowest errors for estimating the infiltrated volume withRMSE 1.86 and 1.78 m3 at blocked furrows, respectively. At freedraining furrows, SIPAR­­_ID with RMSE 1.11 m3 has the best result.The models specifically INFILT with RMSE, 1.63 m3 provided loweraccuracies in cutback flow regime relative to continuous flow.}, keywords = {Infiltration parameters,Furrow irrigation,EVALUE,SIPAR_ID,INFILT}, title_fa = {ارزیابی سه مدل EVALUE، SIPAR_ID و INFILT برای تخمین ضرایب معادله نفوذ کوستیاکف در آبیاری جویچه ای}, abstract_fa = {     تخمین ضرایب نفوذ در آبیاری جویچه ای بسیار دشوار بوده و تأثیر زیادی در طراحی و ارزیابی سامانه های آبیاری سطحی دارد. روش‌های متعددی برای تخمین ضرایب نفوذ وجود داشته و بسته به روش آبیاری متفاوت است. هدف از این تحقیق تخمین ضرایب معادله نفوذ کوستیاکف در آبیاری جویچه ای با استفاده از سه مدل EVALUE، SIPAR _ID و INFILT است. اساس کار مدل اول حل مستقیم و دو مدل دیگر حل معکوس می باشد. در این راستا از اطلاعات شش سری جویچه ی انتها بسته و شش سری جویچه ی انتها باز با شرایط مختلف مزرعه‌ای از جمله طول، شیب و رژیم جریان استفاده گردید. ارزیابی نتایج ضرایب معادله نفوذ از طریق مقایسه حجم آب نفوذ یافته محاسبه و اندازه‌گیری شده انجام گردید. نتایج نشان داد که در برآورد میزان آب نفوذیافته در خاک و ضرایب نفوذ، دو مدل EVALUE و SIPAR _ID به ترتیب با RMSE، 86/1 و 78/1 مترمکعب دارای کمترین خطا در حالت جویچه انتها بسته می‌باشند. در حالت انتها باز نیز مدل SIPAR _ID با RMSE، 11/1 مترمکعب عملکرد مناسبی داشت. همچنین هر سه مدل (به خصوص مدل INFILT با RMSE، 63/1 مترمکعب) در رژیم کاهش جریان دقت کمتری نسبت به رژیم جریان ثابت داشتند.}, keywords_fa = {: ضرایب نفوذ,آبیاری جویچه‌ای,EVALUE,SIPAR_ID,INFILT}, url = {https://jise.scu.ac.ir/article_10495.html}, eprint = {https://jise.scu.ac.ir/article_10495_fd19bf0decc6e0fb3e0751d3b239b016.pdf} }