@article { author = {Lashkar-Ara, Babak and Sheikhi, Yaser}, title = {Introduce of CPK Spillway and Study of Its Discharge Coefficient under Free Flow Regime}, journal = {Irrigation Sciences and Engineering}, volume = {40}, number = {2}, pages = {209-221}, year = {2017}, publisher = {Shahid Chamran University of Ahvaz}, issn = {2588-5952}, eissn = {2588-5960}, doi = {10.22055/jise.2017.13180}, abstract = {      Flood is a stochastic phenomenon and successful and construction of economic dam in flood discharge system is very important. In recent years, non-linear overflows, as a solution, helped designers and engineers of water sciences. In this study, new non-linear overflow weirs as CPK spillways are introduced. Discharge coefficient tests were performed under various scenarios geometry of the overflow in order to investigate the ability of the hydraulic overflow flood discharge. To study the effect of the slope floor of inlet and outlet keys (Z) on the current discharge coefficient, the slope of 1 : 0.5, 1 : 1 and 1 : 1.5 (Horizontal : Vertical) were designed and built. Then in each of the three phase variation in the slope floor of inlet and outlet keys (Z) built and tested. The results indicated that by increasing the slope of inlet and outlet keys (Z), discharge flow rate will be increased. This also increases the number of cycles at low heads, leading to an increase in the flow discharge coefficient. In large heads, the feature of vortex breaking in overflows with the less number of cycles is noticeable. The results showed that the coefficient of discharge in CPK spillway is to 2.2 bigger than in a circular vertical sharp edged weir. Due to the small dimensions of this type of overflow compared to similar types, this nonlinear overflows can be considered as an efficient and economic flood discharge system for introduction to the scientific community of the country.}, keywords = {Crown Wheel,Key,choking,Vortex,Discharge Coefficient}, title_fa = {معرفی سرریز تاج دندانه‌ای و بررسی میزان ضریب تخلیه آن تحت شرایط جریان آزاد}, abstract_fa = {سیلاب یک پدیده تصادفی است و ساخت سیستم تخلیه سیلاب موفق و اقتصادی در یک سد از درجه اهمیت بالایی برخوردار است. در سال‌های اخیر سرریزهای غیر خطی به­عنوان یک راه حل برای کنترل سیلاب، طراحان و مهندسان وابسته به علوم آب را یاری نموده‌اند. در این پژوهش یک سرریز غیر خطی جدید تحت عنوان سرریز تاج دندانه‌ای معرفی شده است. به‌منظور بررسی خصوصیات هیدرولیکی این دسته از سرریزها تحت شرایط جریان آزاد، ضریب تخلیه‌‌ی آن تحت سناریوهای مختلف شکل هندسی سرریز مورد بررسی آزمایشگاهی قرار گرفت. به‌‌منظور بررسی اثر شیب کف کلیدهای ورودی و خروجی بر میزان ضریب تخلیه جریان، شیب‌های 5/0 : 1 ، 1 : 1 و 5/1 : 1 (قائم : افق) در نظر گرفته شد.  سپس در هر یک از سه مرحله تغییر در میزان شیب کف کلیدها، چهار نوع سرریز با طول تاج دو، چهار ، شش و هشت سیکل طراحی، ساخته و مورد آزمایش قرار گرفت. نتایج نشان داد که با افزایش شیب کف کلیدها (Z)، ضریب دبی تخلیه جریان افزایش می‌یابد، همچنین افزایش تعداد سیکل در بارهای آبی کم منجر به افزایش میزان ضریب تخلیه جریان می‌شود. در بارهای آبی زیاد خاصیت گرداب شکنی سرریزهای با تعداد سیکل کمتر قابل توجه می‌باشد. نتایج نشان داد که ضریب تخلیه جریان در سرریز تاج دندانه‌ای تا 2/2 برابر ضریب تخلیه سرریز مدور قائم با ورودی لبه تیز از خود افزایش نشان می‌دهد. برتری میزان ضریب تخلیه­ی سرریز تاج دندانه­ای در مقایسه با سرریزهای لبه تیز مدور  با ابعاد مشابه، می­تواند به­عنوان یک مزیت مهم این دسته از سرریزهای غیرخطی برشمرده شود.}, keywords_fa = {تاج دندانه‌ای,کلید,انسداد,گرداب,ضریب تخلیه}, url = {https://jise.scu.ac.ir/article_13180.html}, eprint = {https://jise.scu.ac.ir/article_13180_68212876d2c1990fe3d4af179368d1b0.pdf} }