دانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Investigating the causes of scouring downstream of stilling basin of Shohada diversion dam and proposing suitable solutions to control itبررسی علل بروز آب شستگی در پایین دست حوضچه آرامش سد انحرافی شهدا و ارایه راه کار مناسب برای کنترل آن1141435310.22055/jise.2017.22138.1587FAمهدیهوحیدی الواردانشجوی کارشناسی ارشد آب و سازههای هیدرولیکی، دانشگاه صنعتی خاتمالانبیا (ص) بهبهان.سید امیناصغری پریدانشیار گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه صنعتی خاتمالانبیا (ص)محمودشفاعی بجستاناستاد گروه سازههای آبی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز.0000-0003-3688-9561نسیمآرماناستادیار، دانشکده منابع طبیعی، دانشگاه صنعتی خاتمالانبیا (ص) بهبهان.Journal Article20170517Shohada diversion dam was constructed on the border of agricultural lands of Behbahan plain (Khuzestan province, Iran) to divert the water of the Maroun River. This dam has a concrete-soil composite. The concrete part consists of an ogee spillway, a stilling basin, and two intake channels and sediments on the right and left sides. The height of the dam is 12.2 meters and its spillway length is 150 meters. The dam has a sloping basin and its capacity is 22 m<sup>3</sup>/sec. The longitudinal slope of this basin is 1 to 5 (vertical: horizon). The studies have shown that parts of downstream of the stilling basin are being eroded and scoured. Unless controlled properly, this will continue and might lead to the destruction of the basin or the main structure of the dam. Most of the stilling or apron basins used in the previous studies are horizontal and smooth, and no research has been conducted on scouring downstream of sloping basins so far. Therefore, the purpose of this research is to explore the causes of scouring downstream of the Shohada dam's stilling basin and its controlling factors to finally provide an appropriate strategy to prevent its spread.<strong>هدف اصلی این تحقیق، مطالعه دلایل تخریب پاییندست حوضچه آرامش سد انحرافی شهدا در استان خوزستان و ارایه راهکارهایی برای جلوگیری از گسترش آن میباشد. به همین منظور مدل فیزیکی </strong><strong>–</strong><strong> هیدرولیکی سد و حوضچه آرامش آن ساخته شده و آزمایشها در دو سناریو انجام گرفت. در آزمایشهای دسته اول، علتهای ایجاد آبشستگی و عوامل مؤثر در آن و در دسته دوم راهکارهای کنترل آبشستگی بررسی شد. نتایج نشان داد کوتاه بودن طول حوضچه آرامش و بیشتر بودن سرعت محلی جریان در پاییندست حوضچه از سرعت آستانه حرکت ذرات بستر، علتهای اصلی بروز آبشستگی میباشند. همچنین مشخص شد با افزایش دبی و افزایش طول پرش هیدرولیکی برای یک دبی ثابت، میزان آبشستگی افزایش و با افزایش عمق پایاب، کاهش مییابد. اثر سنگچین و کاهش شیب مصالح پاییندست حوضچه در کاهش میزان آبشستگی بررسی و مشخص شد استفاده از سنگچین 5 میلیمتر (20 سانتیمتر در واقعیت) بهترین راهکار در کنترل آبشستگی است.</strong>https://jise.scu.ac.ir/article_14353_9e47254b4e7c23c527e17a2f49274ff0.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Comparison of Different Methods Efficiency for Estimation of Nash Instantaneous Unit Hydrograph Parameters in Flood Simulation (Case Study: Aland-Chay, Gara-Chay, Mahabad-Chay and Zab Rivers)مقایسه کارایی روش های مختلف تخمین پارامترهای مدل هیدروگراف واحد لحظه ای Nash در شبیه سازی سیلاب (مطالعه موردی: رودخانههای الندچای، قره چای، مهابادچای و زاب)15281557310.22055/jise.2017.18316.1330FAنداخان محمدیدانش آموخته دکتری، گروه مهندسی آب، دانشگاه ارومیه، ارومیه،ایران.جوادبهمنشاستاد، گروه مهندسی آب، دانشگاه ارومیه، ارومیه، ایرانJournal Article20160620The Unit Hydrographic Theory, which was first proposed by Sherman in 1932, is used as one of the most important rainfall-runoff methods in hydrology. One of the most efficient models in simulating rainfall-runoff phenomenon is the conceptual model known as Nash Instantaneous Unit Hydrograph. In this model, the number of reservoirs and storage coefficients describes the complete shape of Instantaneous Unit Hydrograph (Ahmadin et al., 2010). <br />The model consists of two parameters including n and k. Different methods have been presented to estimate the mentioned parameters. Inaccurate estimation of the model parameters (n and k) causes an error in simulated hydrograph. Methods such as the moments, the least square and the maximum likelihood are some of the proposed ones (Snyder, 1955; Eagleson et al., 1966). The large number of parameters of these methods has limited their use (Rao and Tirtotjondro, 1995). Thus, the researchers tried to develop a model with lower number of parameters and more acceptable accuracy. <br />Some researchers such as Aron and White (1982), Collins (1983), Rosso (1984), Hann et al. (1994), Singh (1998), Singh (2000), Singh et al. (2007), and Bhunya et al. (2003) proposed relationships for estimating Nash Model’s parameters. Others, including Bahremand and Mostafazadeh (2010), Ahmadin et al. (2010) and Aslani et al. (2016) used the proposed relationships and estimated the parameters of Nash model in three different basins of Iran.<strong>مدل مفهومی هیدروگراف واحد لحظهای </strong><strong>Nash</strong><strong>یکی از مدلهای کارآمد در شبیهسازی فرآیندهای هیدرولوژیک نظیر پدیده بارش روانآب میباشد. دو پارامتر مدل </strong><strong>Nash</strong><strong>شامل </strong><strong>n</strong><strong> و </strong><strong>K</strong><strong> میباشند. روشهای مختلفی برای تخمین پارامترهای مذکور ارایه شدهاند. عدم دقت در تخمین پارامترهای مدل (</strong><strong>n</strong><strong> و </strong><strong>K</strong><strong>) باعث بروز خطا در هیدروگراف شبیهسازی شده میشود. در این تحقیق، روشهای مختلف تخمین پارامترهای مدل </strong><strong>Nash</strong><strong>برای شبیهسازی سیلاب در پنج ایستگاه هیدرومتری شامل بیطاس، کوتر، ملهذان، بدلان و گرژال واقع در آذربایجان غربی مورد مقایسه قرار گرفتند. از هر ایستگاه پنج رویداد انتخاب و سپس پارامترهای مدل </strong><strong>Nash</strong><strong>توسط روشهای بهکارگرفتهشده برای تمامی رویدادهای سیل محاسبه گردید. یک رویداد سیل ثبت شده در هر ایستگاه بهصورت تصادفی انتخاب و سپس با استفاده از مقادیر متوسط پارامترهای </strong><strong>Nash</strong><strong>برای چهار رویداد باقیمانده، هیدروگراف سیل منتخب شبیهسازی شد. نتایج شاخصهای آماری بهکاررفته در مرحله صحتسنجی مناسبترین روش برای هر ایستگاه مورد مطالعه را معرفی نمود. نتایج نشان داد که آن دسته از روشهایی که از ویژگیهای هیدروگراف سیلهای موجود جهت برآورد پارامترهای</strong><strong>مدل </strong><strong>Nash</strong><strong>برای شبیهسازی رویداد سیل استفاده میکنند، نسبت به روشهای مبتنی بر خصوصیات فیزیکی حوضه و توزیعات آماری کارایی بهتری دارند. بنابراین، با توجه به نتایج شاخصهای آماری، سه روش مبتنی بر هیدروگراف جریان، برای همه ایستگاههای مورد مطالعه (گرژال (</strong><strong>m<sup>3</sup>/s</strong><strong> 99/12</strong><strong><</strong><strong>RMSE<</strong><strong>01/11)، کوتر (</strong><strong>m<sup>3</sup>/s</strong><strong> 80/1</strong><strong><</strong><strong>RMSE<</strong><strong>79/1)، ملهذان (</strong><strong>m<sup>3</sup>/s</strong><strong> 14/1</strong><strong><</strong><strong>RMSE<</strong><strong>13/1)، بدلان (</strong><strong>m<sup>3</sup>/s</strong><strong> 74/1</strong><strong><</strong><strong>RMSE<</strong><strong>73/1) و بیطاس (</strong><strong>m<sup>3</sup>/s</strong><strong> 14/0</strong><strong>RMSE=</strong><strong>)) بهعنوان مناسبترین روشها جهت تعیین پارامترهای مدل </strong><strong>Nash</strong><strong>پیشنهاد میشوند.</strong>https://jise.scu.ac.ir/article_15573_1cb8833cf70ca6f2e5093951a2403965.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Determination of Water Consumption and Productivity of Wheat in Different Irrigation Systems in Behbahanمقایسه حجم آب مصرفی و بهره وری آب گندم در روش های مختلف آبیاری در شهرستان بهبهان29421432810.22055/jise.2017.23367.1659FAنادرسلامتیاستادیار پژوهش، بخش تحقیقات فنی و مهندسی کشاورزی، مرکز تحقیقات و آموزش کشاورزی و منابع طبیعی خوزستان، سازمان تحقیقات، آموزش و ترویج کشاورزی، اهواز، ایرانجوادباغانیاستادیار پژوهش، موسسه تحقیقات فنی و مهندسی کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران.فریبرزعباسیاستاد پژوهش، موسسه تحقیقات فنی و مهندسی کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران.0000-0002-0662-7723Journal Article20170923<strong>Introduction </strong> <br />Precise estimation of the amount of water consumed, irrigation efficiency and water productivity of crops are the most important key indicators in agricultural sector planning of Iran. The figures given for the volume of water used in the agricultural sector are very different and there are serious doubts as to their accuracy. The average of water use efficiency in the country is 1.32 kg/m<sup>3</sup> and its annual growth in the last 11 years has been reported to be 0.041 kg/m<sup>3</sup> (Abbasi et al., 2017). Therefore, it is necessary to carry out an exploratory work that can be used to quantify the volume of water consumed by various products. Therefore, the main objective of this paper is to measure water consumption of wheat directly and to compare wheat water productivity in different irrigation systems under farmers management in Behbahan. <br /><strong> </strong> <br /><strong>Methodology</strong> <br />The volume of application water for wheat in different farms during one season (2016-2017) was measured and compared. The measured values were compared with the crop water requirement estimated by the Penman-Monteith and the national document. To determine the volume of water consumed, firstly, the flow rate of the selected water sources was measured, with the appropriate devices (flumes, meter and micro molina). Farm information including cultivated area, soil texture, soil electrical conductivity, electrical conductivity of the irrigation water used, and farm location with GPS were recorded. Other field information such as irrigation method, irrigation water sources (surface, underground), type of irrigation network (modern, traditional) were also recorded. Effective rainfall was calculated by the SCS method. Crop water requirement using the Penman-Monteith method was determined from data of current year and 10-year data for Behbahan city from the nearest meteorological station.تخمین نسبتاً دقیق مقدار آب مصرفی، راندمان آبیاری و بهرهوری آب محصولات زراعی در کشور از مهمترین شاخصهای کلیدی در برنامهریزیهای بخش کشاورزی است. هدف اصلی از نوشتار حاضر، بررسی نتایج اندازهگیریهای انجام شده میدانی آب مصرفی و عملکرد گندم در شهرستان بهبهان در روشهای مختلف آبیاری در طول یک فصل زراعی (1396-1395) و همچنین تعیین بهرهوری آب مصرفی گندم در 32 مزرعه تحت مدیریت کشاورزان است. مقادیر اندازهگیری شده با مقادیر برآورد شده نیاز آبی خالص به روش پنمن- مانتیث (نیاز آبی بهروز شده) و سند ملی مقایسه گردید. تعداد 15 مزرعه به روش سطحی، ده مزرعه به روش بارانی و هفت مزرعه به روش قطرهای آبیاری میشدند. عملکرد گندم در تمام مزارع اندازهگیری شده بین 2000 تا 6854 کیلوگرم در هکتار بود. بیشترین بهرهوری آب گندم در مزرعهای با سامانه قطرهای به میزان 79/2 کیلوگرم بر مترمکعب محاسبه شد. راندمان کاربرد در مزارع مورد نظر بین 7/22 تا 7/99 درصد بود. نیاز آبی بر اساس سند بهروز شده در مزارع از 4/373 تا 0/517 میلیمتر ثبت شد. مقایسه میانگین نتایج در آزمون تی نشان داد که سامانه قطرهای با بهرهوری آب 51/1 کیلوگرم بر مترمکعب، دارای بیشترین بهرهوری بوده و اختلاف معنیداری با دو سامانه بارانی و سطحی دارد که بهترتیب دارای بهرهوری آب معادل 90/0 و 88/0 کیلوگرم بر مترمکعب بودند. محاسبه ضرایب همبستگی نشان داد که روند تغییرات حجم آب مصرفی با روند تغییرات شاخص راندمان کاربرد و بهرهوری آب روندی غیرهمراستا و معنیدار در سطح یک درصد را نشان میدهد.https://jise.scu.ac.ir/article_14328_7c6127bdddf16c476b3314738539878d.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Mathematical modeling of energy loss on Stepped Spillway Using ANSYS-CFX Numerical Modelمدلسازی ریاضی افت انرژی در سرریزهای پلکانی با استفاده از مدل عددی ANSYS-CFX43561435010.22055/jise.2017.22269.1593FAسعیدسرکمریاندانشجوی دکتری عمران مهندسی و مدیریت منابع آب، دانشکده مهندسی، دانشگاه شهید چمران اهواز.جواداحدیاندانشیار گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز0000-0002-0911-6494Journal Article20170609 A stepped spillway consists of steps that start from near the crown and continue to downstream heel. Generally, the amount of energy dissipation in stepped spillway is more than the one of flat spillways (with no steps) with the same dimensions. The high amount of energy dissipation caused by steps allows reducing the depth of drilling of downstream stilling basin, length of stilling basin, and the height of sidewalls. This way, a considerable economic saving is achieved in the implementation of dams. Since spillways help reduce flow rate and increase intake airflow rate, they can be referred to as a combination of a spillway and an energy dissipater. Some of the studies on stepped spillways are as follows: <br />Launder and Spalding (1972); Olsen and Kjellesvig (1998); Chen <em>et al</em>. (2002); Tabbara <em>et al</em>. (2005); Dermawan <em>et al</em>. (2010); Sori and Mojtahedi. 2015; Haji azizi <em>et al</em>. (2016) <br /> So far, the studies on stepped spillways have been mostly on experimental and physical models. However, experimental and physical models are costly and sometimes have limitations such as required space and a large number of tests. This necessities consideration of further mathematical and numerical models. Several numerical models can be introduced to analyze flow on a stepped spillway. CFX is one of the numerical models. CFX has been known as one of the most robust software for fluid flow analysis and heat transfer. The finite volume method (FVM) is a numerical method to solve the governing differential equations, which is capable of simulating complexities of a turbulent flow on a spillway appropriately. On the other hand, CFX numerical model uses the coupled model, which increases the speed to achieve results considerably as compared to other numerical models. This research aims at simulating a stepped spillway using CFX numerical model and assessing the amount of energy dissipation under geometric parameters (such as spillway height, spillway gradient, number of steps, and height of steps) and hydraulic parameters (such as flow rate). The difference between this research and other studies can be attributed to the coherence and correlation in studying various components (geometric and hydraulic parameters) and the ability of CFX numerical number in replacing some of the costly and time-consuming tests.<strong>در این تحقیق سرریز پلکانی با استفاده از مدل عددی </strong><strong>CFX</strong><strong> شبیهسازی شده و میزان استهلاک انرژی تحت</strong><strong></strong><strong>تأثیر پارامترهای هندسی پلکانها و دبی عبوری جریان از روی سرریز بررسی شده است. در این زمینه برای مدلسازی آشفتگی جریان از مدل تلاطمی </strong><strong><em>k-ε</em></strong><strong> استاندارد استفاده گردیده است. برای دستیابی به اهداف این تحقیق، در ابتدا مدلهای عددی </strong><strong>CFX</strong><strong> نسبت به یک مدل آزمایشگاهی مورد واسنجی و صحتسنجی قرار گرفتند. نتایج حاصل از واسنجی و صحتسنجی نشان داد که پاسخهای مدل عددی </strong><strong>CFX</strong><strong> تطابق خوبی با نتایج آزمایشگاهی دارد. </strong><strong>پس از آن میزان استهلاک نسبی انرژی به ازای تعداد پلکانها، دبیها و شیبهای مختلف در </strong><strong>مدل عددی </strong><strong>CFX</strong><strong>مورد بررسی قرار گرفت. </strong><strong>نتایج حاصل نشان داد که در سرریز ده پلکانی، دبی در واحد عرض50 لیتر بر ثانیه بر متر، کاهش استهلاک انرژی در اثر افزایش دو برابر دبی، 96/21 درصد و در اثر افزایش دو برابر شیب، 38/11 درصد و در اثر افزایش دو برابر تعداد پلکانها، 80/5 درصد میباشد. همچنین نتایج حاصل از ارزیابی مدلهای عددی نشان داد که افزایش دو برابری ارتفاع پله در یک سرریز، درصورتیکه شیب سرریز ثابت بماند و </strong> <strong> برابر با دو باشد موجب افزایش استهلاک انرژی به میزان 61/23 درصد میشود. با توجه به نتایج بدستآمده درمجموع میتوان عنوان کرد که</strong> <strong>مدل عددی</strong> <strong>CFX</strong><strong>به دلیل</strong> <strong>دقت بالای نتایج بدستآمده نسبت به نتایج آزمایشگاهی</strong><strong> و همچنین هزینه کم محاسباتی میتواند جایگزین مناسبی برای برخی از روشهای آزمایشگاهی پرهزینه و زمانبر باشد.</strong>https://jise.scu.ac.ir/article_14350_a2287cfb2805fea47a4b68a269d58c8f.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Prediction of Flood and its Smart Remote Controlپیش بینی سیل وکنترل هوشمند آن از راه دور57721433410.22055/jise.2017.23136.1643FAمحمد علیلطف اللهیاستاد دانشکده عمران، دانشگاه تبریز، تبریز، ایرانمحمد تقیاعلمیاستاد دانشکده عمران، دانشگاه تبریز، تبریز، ایران.محمد رحیمافشانیدانشجوی دکتری مهندسی عمران-سازههای هیدرولیکی، دانشگاه تبریز، تبریز، ایران.Journal Article20170916Heavy, long-term precipitations can lead to severe floods in most drainage basins, thus causing financial losses and casualties (Fotakis and Sidiropoulos, 2014, Avila-Melgar, et al. 2017). Low precipitation, lack of surface water and groundwater, and increased demand for water calls for optimized use of reservoirs and floods. Inevitably, critical points should be identified and simple non-structural and structural methods or a combination of both, which are environmentally friendly and feasible, should be employed for flood prediction and control. In addition to imposing considerable costs, construction of flood control installations cannot fully eliminate the flood risks and, therefore, more severe floods may still lead to disasters. Construction of large flood control structures such as dykes is not only financially unjustifiable, but also inappropriate as solution both environmentally and socioeconomically. Flood prediction and alarm systems are among the non-structural criteria the importance of which are further realized over time. Installation and implementation of smart flood prediction and alarm systems can lead to reduced casualties and damages from both perspectives of flood risk management and nonstructural management.<strong>برای افزایش نتیجه بهرهبرداری از مخازن و کاهش هزینهی احداث سیستمهای تخلیه اضطراری سیلابها، جلوگیری از خسارات مالی و جانی در پایین دست سد، پیشبینی سیل و کنترل آن ضروری است. در این مقاله سیل طرح یا سیل خطرساز پیشبینی و از راه دور مدیریت و کنترل شده است. سیستمهای هوشمند با استفاده از تبدیل</strong><strong>z</strong><strong>، میکروکنترلرها، حسگر، ارتفاع سنج آلتراسونیک، مدارهای فرستنده، گیرنده امواج رادیویی و ماهوارهای، ریزپردازنده، موتور الکتریکی، قطعات الکترونیکی دیگر و نرمافزارهای مناسب، طراحی و ساخته شدند. سیستم در دهانهی رودخانهی ورودی به مخزن و در ارتفاع مناسب نصب میشود. با نمونهبرداری از سطح آب، ارتفاع و حجم آب ورود به مخزن مشخص و نمونهها بهوسیلهی امواج رادیویی و ماهوارهای به سیستم مرکزی در اتاق کنترل ارسال میگردند. اطلاعات ارسالی در سیستم مرکزی دریافت و پس از آشکار شدن مورد تجزیه و تحلیل قرار میگیرند. در اتاق کنترل، هیدروگراف سیل، حداکثر ارتفاع و حجم آب ورود به مخزن روی صفحهی مانیتور نشان داده میشوند. سیستم هوشمند، با توجه به اطلاعات دریافت شده، بهوسیلهی موتور الکتریکی یا دستگاههای هیدرولیکی و پنوماتیکی بهصورت اتوماتیک، دریچه و در صورت لزوم دریچههای سد را باز میکند. با نصب سیستم هوشمند، سیل شناسایی و بهرهبرداری از آب درون مخزن مدیریت میشود و ایمنی سد در برابر سیل تحقق مییابد. با نصب سیستم هوشمند نیروی انسانی کاهش یافته و خطای دید آنها برطرف میشود و از خطرات سیل در پاییندست سد جلوگیری بهعمل میآید.</strong>https://jise.scu.ac.ir/article_14334_e74bdd977b6d095552fe2ddfee5ebb34.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Evaluation of Critical Sink Surface in Vertical Intake Branched out from Reservoirارزیابی خصوصیات سطح ریزش بحرانی در آبگیر قائم منشعب از مخزن73881557510.22055/jise.2018.23695.1690FAبهزادعظیمیدانش آموخته کارشناسی ارشد، دانشکده مهندسی عمران، دانشگاه صنعتی جندی شاپور دزفول.بابکلشکرآرادانشیار دانشکده مهندسی عمران، دانشگاه صنعتی جندی شاپور دزفوللیلانجفیمربی دانشکده مهندسی عمران، دانشگاه صنعتی جندی شاپور دزفول.محمدذاکر مشفقاستادیار دانشکده مهندسی عمران، دانشگاه صنعتی جندی شاپور دزفول.Journal Article20180102Intakes are the most significant hydraulic structures, which are also used as inlet structures in outlets to supply water for hydro-electric power, irrigation, and drinking. A major problem for vertical circular spillways is that vortexes are formed on their inlet with several negative effects: reducing discharge coefficient, excessive head formation on spillway inlet, structure vibration, increasing of cavitation formation probability, suction of floating bodies into conduit, excessive oscillations on flow surface, unsteady flow formation, and increasing energy losses are the major consequences. Vortex flows result from flow direction variation, viscosity and surface tension. The flow type causes negative effects in operation of structures such as vertical circular spillway (Kabiri Samani and Borghei, 2001). <br />Taştan and Yildirim (2010) indicated that critical submerged depth for intake in canal with uniform flow equals radius of spherical sink surface, which was finally named critical spherical sink surface. Rankine (1858) represented a model of vortex, namely Rankine compound vortex. In this model, it is assumed fluid particles, which are in the vicinity of vortex center, are solid bodies with high viscosity and rotational motion around their axes (Forced Vortex). The area is located inside nonviscous zone at a distance from vortex center. This research investigates geometric and hydraulic properties of critical sink surface by simulating flow in the environs of vertical intake inlet.<strong>عمق استغراق در حالت بحرانی منجر به ایجاد یک سطح ریزش بحرانی در اطراف ورودی سرریز قائم میشود. مشخصات این سطح ریزش بحرانی تابع خصوصیات جریان نزدیک شونده به سرریز و موقعیت آن نسبت به جدارههای مخزن میباشد. در این پژوهش با استفاده نرمافزار </strong><strong>Flow-3D</strong><strong> به شبیهسازی عددی جریان در اطراف سرریزهای مدور قائم با ورودی لبه تیز پرداخته شده</strong><strong>است. برای این منظور سناریوهای مختلفی با تغییر در میزان قطر دهانه آبگیر، تدوین گردید. پس از بررسی هیدرولیکی جریان در اطراف سطح ریزش بحرانی، مشخصات هندسی این محدوده مورد ارزیابی قرار گرفت. نتایج نشان داد که هندسه سطح ریزش بحرانی بهصورت کره نبوده و از شکل دلوار پیروی مینماید، که این ناحیه ریزش متناسب با قطر دهانه آبگیر تغییر حجم میدهد. هم</strong><strong></strong><strong>چنین ارزیابیهای بهعمل آمده در راستای تغییر در میزان ارتفاع آبگیر نشان داد که با افزایش ارتفاع آبگیر باقطر ثابت، از 3</strong><strong><em>P/D</em></strong><strong>=</strong><strong>به 5</strong><strong><em>P/D</em></strong><strong>=</strong><strong>سرعتهای شعاعی، مماسی و عمقی در سطح ریزش، بهترتیب 45، 24 و 11 درصد افزایش داشتهاند.</strong>https://jise.scu.ac.ir/article_15575_e4a1757c4d81ee11ec59f49fb4d0aa30.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Estimating the Discharge Coefficient of the Type B Piano-Key Side Weir at a 120° Curve using RBF and ANFIS Models in Comparison with Artificial Neural Networksبرآورد ضریب تخلیه سرریز جانبی کلیدپیانویی تیپ B در انحنای 120 درجه با استفاده از مدل های RBFو ANFIS و مقایسه با شبکه عصبی ANN891001431410.22055/jise.2018.24375.1723FAیاسرمهریدانش آموخته کارشناسی ارشد و دانشجوی دکتری سازه های آبی دانشگاه تهراننادرعباسیاستاد موسسه تحقیقات فنی و مهندسی کشاورزی، سازمان تحقیقات، آموزش و ترویج کشاورزی، کرج، ایران.Journal Article20171206Side weirs are used to control the water level, flow deviations and drain the excess discharge in irrigation networks, sewer systems, and flood control systems. Considering that it is not possible to increase the length of side weirs to increase their capacity, other types of weirs may be used to overcome this problem. Therefore, incorporating weirs that are associated with a higher length of the same width can be helpful. Accordingly, non-linear piano-key weirs may be used side weirs. Numerical methods can be used to estimate the discharge coefficient of piano-key weirs. Bilhan et al. (2011) used an ANN to estimate the discharge coefficient in a curved canal with a labyrinth weir. Ebtehaj et al. (2015) used the GEP model to estimate the coefficient of discharge in a straight canal. Parsaei (2016) studied the accuracy of the ANN in estimating the coefficient of discharge in a sharp-crested rectangular ogee weir and found the ANN to offer an acceptable accuracy. None of the previous studies have addressed the efficiency of intelligent models in estimating the discharge coefficient of ogee-shaped piano-key weirs. Therefore, this study aims to obtain the discharge coefficient of the piano-key weirs using RBF, ANFIS, and ANN models.<strong>سرریزهای جانبی در شبکه</strong><strong></strong><strong>های آبیاری و زهکشی، سیستم</strong><strong></strong><strong>های آّب و فاضلاب و کنترل سیلاب مورد استفاده قرار میگیرند و معمولاً برای کنترل تراز آب، انحراف جریان و تخلیه دبی اضافه استفاده میشوند. با توجه به اهمیت بهبود عملکرد سرریزهای جانبی، میتوان از سرریزهای کلیدپیانویی که طول مؤثر بیشتری دارند، استفاده کرد. قوس بیرونی کانال</strong><strong></strong><strong>های دارای انحنا، بهترین مکان</strong><strong></strong><strong> برای تعبیه سرریزهای جانبی هستند. در این پژوهش در ابتدا با بررسی آزمایشگاهی بر روی سرریزجانبی کلیدپیانویی تیپ </strong><strong>B</strong><strong>در قطاع 120 درجه ضریب تخلیه این سرریزها برای هر آزمایش استخراج شد.</strong><strong>سپس توانایی مدل</strong><strong>, </strong><strong>RBF</strong><strong> </strong><strong>ANFIS</strong><strong> و شبکه عصبی </strong><strong>ANN</strong><strong> در پیش</strong><strong></strong><strong>بینی ضریب تخلیه سرریز مورد ارزیابی قرار گرفت. برای این منظور دو مدل</strong><strong>RBF</strong><strong> و </strong><strong>ANFIS</strong><strong> در محیط نرم</strong><strong>افزار </strong><strong>MATLAB</strong><strong>کدنویسی شد. با تحلیل نتایج بهدست آمده، هر دو مدل </strong><strong>RBF</strong><strong> و </strong><strong>ANFIS</strong><strong> دارای دقت بالاتری نسبت به شبکه عصبی </strong><strong>ANN</strong><strong> هستند. همچنین مشخص شد که مدل </strong><strong>RBF</strong><strong> با </strong><strong>RMSE=0.044</strong><strong> و </strong><strong>R2=0.974</strong><strong> دارای دقت بالاتری نسبت به مدل هوشمند </strong><strong>ANFIS</strong><strong> با</strong><strong>=0.</strong><strong>0529 </strong><strong> </strong><strong> </strong><strong>RMSE</strong><strong>و</strong><strong>=0.981 </strong><strong> </strong><strong>R2</strong><strong> است. شبکه عصبی مصنوعی با</strong><strong>=0.</strong><strong>0694 </strong><strong> </strong><strong>RMSE</strong><strong> و </strong><strong>R2=0.82</strong><strong> از لحاظ دقت پیشبینی بعد از دو مدل یادشده است. </strong>https://jise.scu.ac.ir/article_14314_bf49a9317d209efb66629bbbdaa61ec0.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Studying the effect of shape changes in plan of labyrinth weir on increasing flow discharge coefficient using Flow-3D numerical modelبررسی تأثیر تغییر شکل در پلان سرریز کنگره ای بر افزایش ضریب دبی جریان به کمک مدل عددی Flow-3D1011161434710.22055/jise.2018.22395.1604FAالهامضمیریدانشجوی کارشناسی ارشد مهندسی و مدیریت منابع آب، دانشکده مهندسی عمران، دانشگاه سمنان.حجتکرمیاستادیار، گروه مهندسی آب و سازههای هیدرولیکی،دانشکده مهندسی عمران، دانشگاه سمنانسعیدفرزیناستادیار، گروه مهندسی آب و سازههای هیدرولیکی، دانشکده مهندسی عمران، دانشگاه سمنان.Journal Article20170605Engineers are looking for solutions for flood control and increasing discharge capacity of canals and rivers. Application of labyrinth weir is suggested as a solution for increasing discharge capacity. In this research, labyrinth weir with sidewall angle that was equal to 6°, was simulated through Flow-3D model using experimental results of previous researchers. After validation, the changes of discharge coefficient of weir with angles of 45° and 85° and apex shapes of triangular and half circular shapes were analyzed. Based on the results, discharge coefficients of labyrinth weir with angles of 85° and 45° were on average 2.28 and 1.24 times greater than discharge coefficient of labyrinth weir with angle of 6°, respectively. Also, discharge coefficient of weir with triangular and half circular apex shapes has an increase of 50.29 and 4.15% in comparison with linear apex. Finally, an equation was proposed for prediction the discharge coefficient of labyrinth weir that is able to estimate the discharge coefficient with an acceptable level of accuracy.<strong>مهندسین همواره در جستجوی راههایی برای کنترل سیلاب و افزایش دبی عبوری از کانالها و رودخانهها هستند. بهکارگیری سرریز کنگرهای بهعنوان راهحلی جهت افزایش دبی عبوری پیشنهاد میگردد. در این تحقیق سرریز کنگرهای با زاویه دیواره شش درجه با استفاده از مدل </strong><strong>Flow-3D</strong><strong> و بهکمک نتایج آزمایشگاهی محققین قبلی شبیهسازی گردید. پس از صحتسنجی، تغییرات ضریب دبی سرریز با زاویههای دیواره برابر با 45 و 85 درجه و شکل دهانه بهصورت نیمدایره و مثلثی، مورد بررسی و تحلیل قرار گرفت. نتایج بررسی حاکی از آن است که ضریب دبی در سرریز کنگرهای با زوایای دیواره 45 و 85 درجه بهطور متوسط به ترتیب 24/1 و 28/2 برابر مقدار ضریب دبی در سرریز با زاویه دیواره شش درجه میباشد. همچنین ضریب دبی در سرریز با دهانه مثلثی و نیمدایرهای شکل، بهطور متوسط به ترتیب افزایش 29/50 و 16/4 درصدی نسبت به ضریب دبی در سرریز با دهانه خطی دارد. در نهایت رابطهای به منظور پیشبینی ضریب دبی در سرریز کنگرهای پیشنهاد گردید که با دقت قابل قبولی قادر به تخمین ضریب دبی میباشد.</strong>https://jise.scu.ac.ir/article_14347_786fc0dc383d3fa526b3c559ea34f635.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Effect of Superabsorbent Polymer on Yield, Yield components and Water Use Efficiency of Lettuceبررسی کاربرد پلیمر سوپرجاذب بر عملکرد، اجزای عملکرد و کارایی مصرف آب کاهو1171291435610.22055/jise.2018.22111.1586FAهانیهطاهریکارشناسی ارشد آبیاری و زهکشی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز.امیرسلطانی محمدیدانشیار گروه آبیاری و زهکشی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز0000-0002-9861-6545ناصرعالم زاده انصاریدانشیار گروه علوم باغبانی، دانشکده کشاورزی، دانشگاه شهید چمران اهواز.0000-0002-8122-2400Journal Article20170525Water deficiency or drought is among the most important factors in reducing crop production (Heidari, et al., 2013). Water deficiency or water stress occurs when transpiration is more than water absorption (Alizadeh, 2008). One of the methods that researchers have been studying to increase water use efficiency and performance over the last decade is the use of superabsorbent polymers and deficit irrigation (Khyrabadi, et al., 2014). The superabsorbent polymer is a kind of hydrocarbon, which absorbs water several times as much as its own weight. Due to the drying of the root environment, the water inside these polymers is gradually evacuated and placed at the disposal of the plan, thus the soil will remain moist for a long time without the need for re-irrigation (Abedi Kupai, And Sohrsb, 2005). Considering that the most important advantage of superabsorbent application is reducing the effect of drought stress, this study investigated the effect of deficit irrigation and different levels of superabsorbent on yield, yield components and water use efficiency of lettuce.<strong>با توجه به محدودیت منابع آب، استفاده بهینه از آب ضروری است</strong><strong>.</strong><strong> با کاربرد </strong><strong>برخی مواد نظیر پلیمرهای سوپرجاذب، میتوان از بارندگیهای مقطعی و سایر منابع محدود آب در امر حفظ و ذخیره آب در خاک استفاده نمود. پلیمرهای سوپرجاذب با جذب آب و تا حدودی، املاح کودی و انقباض و انبساط متناوب باعث بهبود خـصوصیات فیزیکی و شیمیایی خاک میشوند. به منظور ارزیابی تأثیر پلیمر سوپرجاذب بر عملکرد، اجزای عملکرد و کارایی مصرف آب کاهو، پژوهشی در قالب </strong><strong>یک </strong><strong>طرح کاملاً تصادفی فاکتوریل با دو تیمار رژیم آبیاری( در سه سطح 60، 80 و 100 درصد تأمین نیاز گیاه) و غلظت سوپرجاذب (در چهار سطح صفر، 4 ،6 و 8 گرم در هر کیلوگرم خاک گلدان) در خاک لومی در سه تکرار در مزرعه تحقیقاتی دانشکده مهندسی علوم آب دانشگاه شهید چمران اهواز انجام شد. نتایج نشان داد که کاربرد سوپرجاذب و کم آبیاری در سطح یک درصد بر میزان عملکرد و اجزای عملکرد تأثیر معنی</strong><strong></strong><strong>دار دارد و بیشترین عملکرد (وزن تر سر کاهو، 3/572 گرم)، ارتفاع از سطح خاک (5/25 </strong><strong>سانتیمتر</strong><strong>) در شرایط بدون تنش (100 درصد تأمین نیاز گیاه) و در حضور شش گرم سوپرجاذب در هر کیلوگرم خاک، بیشترین قطر (37 سانتیمتر) در شرایط 100 درصد تأمین نیاز گیاه و هشت گرم پلیمر و بیشترین کارایی مصرف آب (02/49 کیلوگرم بر مترمکعب) در شرایط 60 درصد تأمین نیاز گیاه و هشت گرم پلیمر به دست آمد. استفاده از شش گرم پلیمر و آبیاری کامل به منظور تولید حداکثر محصول توصیه میگردد. </strong>https://jise.scu.ac.ir/article_14356_8d2d7cbbf237dbc08bb749fce52701a1.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Comprison of Fuzzy Possibilistic Regression and Fuzzy Least Square Regression Models to Estimate Groundwater Level of Neyshabour Aquiferمقایسه مدل رگرسیون فازی امکانی و رگرسیون کمترین مربعات فازی در پیشبینی تراز سطح ایستابی آبخوان دشت نیشابور1311431433110.22055/jise.2018.23275.1652FAسپیدهزراعتی نیشابوریدانشآموخته کارشناسی ارشد مهندسی منابع آب، دانشکده کشاورزی، دانشگاه بیرجند.محسنپوررضا بیلندیدانشیار، گروه علوم و مهندسی آب، دانشکده کشاورزی، دانشگاه بیرجند.عباسخاشعی سیوکیدانشیار، گروه علوم و مهندسی آب، دانشکده کشاورزی، دانشگاه بیرجند.علیشهیدیدانشیار، گروه علوم و مهندسی آب، دانشکده کشاورزی، دانشگاه بیرجند.Journal Article20180214Introduction <br />Groundwater has always been considered as one of the main sources of drinking, agriculture, and industrial water, especially in arid and semi-arid regions. Investigating groundwater level changes in any region has an important role in planning sustainable water resources management. Continuous decline of groundwater level has been observed worldwide in the past half-century. Groundwater is the most important and the only source of freshwater in Neyshabour plain. Unallowable discharges of the groundwater resources and the reduction of recharge factors have caused about 200 million cubic meters deficit in Neyshabour aquifer. Therefore, estimating groundwater is vitally important for the management of water resources. <br /> <br />Methodology <br />This study was conducted in Neyshabour aquifer in Khorasan Razavi province situated between 58<sup>o</sup>13' to 59<sup>o</sup>30' eastern longitude and 35<sup>o</sup>40' to 36<sup>o</sup>39' northern latitude. Neyshabour plain has an important role in agricultural productions of Khorasan Razavi. In this study, the fuzzy possibilistic regression and fuzzy least square regression approaches were evaluated in order to forecast the groundwater changes in Neyshabour aquifer. For this propose, the parameters affecting aquifer level, including monthly precipitation, discharge detected, and fuzzy regression approaches were employed to estimate groundwater level of aquifer, and then raster maps were determined by geostatistical methods. Data bank was determined by Arc GIS software from raster maps to train and test fuzzy regression models. 50 percent of data was selected as calibration data and 50 percent of data was selected as validation data in each model. In linear regression, for each series of input variables, only a specific output value is computed, while fuzzy regression models estimate the boundaries of possible values for the output variables. Therefore, unlike the classical regression, which was based on probability theory, the fuzzy regression is based on possibility and fuzzy sets theory. Fuzzy possibilistic regression, introduced by Tanaka et al. (1982), is an approach that provides the best regression equation by minimizing the amount of fuzzy. The general form of this fuzzy regression function is as follows: <br />[ <br /> <br /> <br /> <br /> <br />Ỹ =Ã<sub>0</sub>+Ã<sub>1</sub>X<sub>1</sub>+Ã<sub>2</sub>X<sub>2</sub>+ Ã<sub>3</sub>X<sub>3</sub>+…+Ã<sub>n</sub>X<sub>n </sub> <br /> <br /> <br />(1) <br /> <br /> <br /> <br /> <br /> <br />where Ã<sub>0</sub> and Ã<sub>1</sub> are the fuzzy intercept and fuzzy slope coefficients, respectively, and X is the independent variable and the output Ỹ (or dependent variable) is a fuzzy number. <br />Fuzzy least-squares regression (FLSR) method as proposed by Savic and Pedrycz (1991) was adopted for this analysis. For the purpose of current study, the efficiency of the fuzzy possibilistic and fuzzy least square regression models for groundwater prediction in Neyshabour aquifer were compared. Validation and Verification of models were determined based on mean error (ME), root mean square error (RMSE), and coefficient of determination (R<sup>2</sup>).<strong>آبهای زیرزمینی بهعنوان مهمترین منبع تولید آب شیرین دشت نیشابور، با کسری مخزنی حدود 200 میلیون مترمکعب مواجه است. ازاینرو در پژوهش حاضر کارایی روشهای رگرسیون فازی امکانی و رگرسیون کمترین مربعات فازی در پیشبینی تراز سطح ایستابی آبخوان دشت نیشابور بررسی گردید. با استفاده از اطلاعات 57 چاه مشاهدهای از سال 1357 تا 1387 و اعمال پارامترهای بارش، تراز سطح ایستابی و تخلیه با تأخیر زمانی یک و دوماهه بهعنوان ورودی، مدلها مورد آزمون قرار گرفت، نتایج نشان داد به دلیل</strong><strong>وجود نوسانات</strong><strong>سطح</strong><strong>آب</strong><strong>در</strong><strong>ماههای</strong><strong>مختلف، بیشترین ضریب تبیین و کمترین مقادیر آمارههای میانگین مطلق خطا و جذر مربعات خطا برای هر دو مدل در ماههای بهار و بالاترین دقت در ماه خرداد با </strong><strong>R<sup>2</sup></strong><strong> و </strong><strong>RMSE</strong><strong>بهترتیب 93/0 و 05/6 برای مدل رگرسیون امکانی فازی بود. بر اساس شاخصهای اعتبارسنجی، مدل رگرسیون امکانی فازی بهمراتب نتایج دقیقتری در برآورد تراز سطح ایستابی آبخوان نیشابور نشان داد.</strong>https://jise.scu.ac.ir/article_14331_e3e711757b860101a17a20f5fc224446.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Effect of Different Tillage Methods and furrow spacing on Soil Hydraulic Characteristics in Furrow Irrigationتاثیر روشهای مختلف خاکورزی و فاصله جویچهها بر ویژگیهای هیدرولیکی خاک در آبیاری جویچهای1451561431810.22055/jise.2018.24226.1712FAامیدبهمنیاستادیار گروه علوم و مهندسی آب، دانشکده کشاورزی ، دانشگاه بوعلی سینا همدانسمیرااخواناستادیار گروه علوم و مهندسی آب، دانشکده کشاورزی ، دانشگاه بوعلی سینا همدان.محمدخرمیانعضو هیات علمی بخش تحقیقات فنی و مهندسی مرکز تحقیقات کشاورزی و منابع طبیعی صفی آباد، دزفول..عباسقلیزاده خلتهدانشجوی کارشناسی ارشد گروه علوم و مهندسی آب، دانشکده کشاورزی ، دانشگاه بوعلی سینا همدان.Journal Article20171118Conservation tillage systems are recommended by government agencies around the world as an appropriate management option for preserving soil and water resources. <br />Protective tillage has advantages over conventional tillage in terms of reducing energy consumption (Abbaspour et al., 2005). These include reducing erosion of water and wind (Lithourgidis et al., 2007), requiring less labor, increasing soil organic matter, and accelerating time of the second crop (Ito et al., 2007). <br />Here, Manning’s roughness and penetration function are particularly important. More accurate evaluation, design and simulation of these parameters provide better irrigation systems. If the parameters of the penetration equation are not close to the field conditions, irrigation may cause runoff and deep percolation. Kuotsu et al. (2014) studied the effects of different tillage on soil hydraulic properties and the productivity of rainfed land under rapeseed cultivation in northeastern India. The results of their research showed that infiltration and hydraulic conductivity significantly increased in conservation tillage systems, and the amount of water use efficiency (WUE) was the highest in the conservation tillage system. <br />Considering the necessity of protecting the soil and water resources and the important role of tillage operations, this research investigated the effects of different tillage methods on the hydraulic properties of barley surface irrigation using WinSRFR model.<strong>به منظور بررسی اثر روشهای مختلف خاکورزی بر ویژگیهای هیدرولیکی آبیاری سطحی جویچهای آزمایشی در شمال استان خوزستان در خاکی با بافت سیلتی رسی لوم و شرایط اقلیمی گرم و نیمهخشک اجرا شد. چهار تیمار شامل دو تیمار خاکورزی مرسوم</strong><strong> CT1 </strong><strong>و </strong><strong> CT2</strong><strong>(شخم با گاوآهن برگرداندار+ 2دیسک عمود برهم) و دو تیمار کم خاکورزی </strong><strong>MT1</strong><strong> و </strong><strong>MT2</strong><strong> (اعمال دو دیسک عمود بر هم) با فواصل پشتههای 6/0 و 75/0 متر در جویچههای به طول 50 متر و در سه تکرار بهصورت اسپلیت پلات در قالب طرح پایه بلوکهای کامل تصادفی انجام شد. خصوصیات هیدرولیکی آبیاری سطحی (ضرایب معادله نفوذ، ضریب زبری، هیدروگراف دبی ورودی و خروجی) و بازدههای آبیاری اندازهگیری، شبیهسازی (مدل </strong><strong>WinSRFR4.3.1</strong><strong>) و با استفاده از آزمون چند دامنهای دانکن مورد مقایسه قرار گرفتند. نتایج نشان داد که شیوه خاکورزی و عرضجویچه تاثیر معنیداری بر ضرایب معادله نفوذ کوستیاکوف لوییس داشت. اثرات متقابل خاکورزی و عرضجویچه روی ضرایب معادله نفوذ در سطح احتمال یک</strong><strong> درصد و روی توان معادله نفوذ درسطح احتمال پنج درصد تأثیر معنیداری داشت. نتایج شبیهسازی نشان داد که مدل</strong><strong> WinSRFR </strong><strong> توانایی قابل قبولی در شبیهسازی هیدروگراف دبی ورودی – خروجی و بازدههای آبیاری را دارد. کمترین میزان خطا 54/0</strong><strong>=</strong><strong>RMSE</strong><strong> بین دادههای مزرعه و شبیهسازی شده با در روش کم خاکورزی مشاهده گردید. لذا پیشنهاد میشود که ضرایب معادله نفوذ و بازدههای آبیاری در شرایط مختلف خاکورزی و عرض جویچه اصلاح گردند و مطابق با آنها طراحی لازم صورت گیرد.</strong>https://jise.scu.ac.ir/article_14318_1885205ad6b4bebef2a96e07f8ad994a.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Effects of Dam Construction and the Karoon River’s Change of Hydrology Regime on Soil Salinity and Dust Storms of Khuzestan Plainبررسی اثرات سدسازی و تغییر رژیم هیدرولوژی رودخانه کارون بر شوری اراضی و رخداد پدیده گرد و غبار در دشت خوزستان1571721437510.22055/jise.2018.20709.1490FAسیروسجعفریدانشیار علوم و مهندسی خاک، دانشگاه علوم کشاورزی و منابع طبیعی خوزستانJournal Article20161231<strong>Introduction</strong> <br /> Khuzestan plain is part of Mesopotamia. This plain was long ago irrigated and drained due to floods (Rangzan and Jafari, 2017). Then, plants started to grow everywhere in this area. With the construction of dams in the past decades, the flooding was hindered; however, since soils were saline, civil plant could not grow anymore (Anonymous, 2011). Therefore, these lands became bare and dust storms started to happen in the plain. In this research, we studied soil salinity and its sources or agents in these area (Ayers and Westcot, 1976). We specially focused on evaluation of dam contractions and effects of the Karoon Rivers’ hydrology regime change on the ecology of certain areas of Khuzestan plain. <br /><strong> </strong> <br /><strong>Methodology</strong> <br />We focused on studies done by Rangzan and Jafari on the Karoon River (at Mollasani station) over a forty-year period in order to investigate its discharge and salinity changes (Anonymous, 2011). Dam construction data in the same period were collected. Also, soil salinity and alkalinity were recorded during summer for 6800 hectares in the south of Ahvaz and north of Shadegan Wetland, over a period of 25 years, in 1991 and 2011. Soil EC was also determined in extracted paste in 2017. Sodium absorption ratio (SAR) was calculated from Na, Ca, and Mg concentrations determined in these extracted pastes. Soil salinity and alkalinity (SAR) maps were drawn by Arc GIS Ver. 10.3. For this manure, ECe and SAR were partitioned in 10 levels from 0-90 and polygons were shown in these ranges for all provided maps.<strong>این مطالعه برای بررسی اثر سدسازی و تغییر رژیم هیدرولوژی رودخانه کارون بر زیست بوم منطقه انجام شد.</strong><strong>برای بررسی تغییرات دبی و شوری رودخانه کارون، از آمارهای یک دوره چهل ساله (95-1355) رودخانه کارون در ایستگاه ملاثانی استفاده شد. همچنین تغییرات شوری و سدیمی خاک، در محدوده معینی از دشت خوزستان، به وسعت حدود 6800 هکتار در پایین دست شهر اهواز و در شمال تالاب شادگان، در طی سالهای 1369، 1389 و 1395 مقایسه شد. نتایج نشان داد میزان شوری از سال 1369 تا 1395 رو به افزایش است. با تغییر رژیم هیدرولوژی رودخانه کارون و کاهش دبی آن، از یک سو کیفیت آب به شدت کاهش یافته و میزان املاح نیز به بیش از دو برابر افزایش یافته است. از سوی دیگر ممانعت از جریان سیلابی دشت، سبب شوری شدید خاکها شده است. به طوری</strong><strong></strong><strong>که مساحت اراضی با شوری بیش از 30 دسی زیمنس بر متر برای وسعت 6800 هکتاری مورد مطالعه، از 5248 هکتار (2/77%) در سال 1369 به 6754 هکتار (3/99%) در سال 1395 افزایش یافته است. به دلیل ایجاد این میزان از شوری که فراتر از حد تحمل گیاهان شور دوست بومی است، پوشش گیاهی منطقه از بین رفته و خاک لخت شده است. در این مناطق عاری از پوشش گیاهی در مواجه با بادهای دائمی منطقه، طوفانهایی از گرد و غبار ایجاد شده است. بنابراین تغییر رژیم هیدرولوژی رودخانه، عامل بخشی از مشکلات فعلی کیفیت هوا بهشمار میآید. از اینرو بازنگری و تجدید نظر در عوامل موثر در تغییر رژیم هیدرولوژی از جمله اقدامات سد سازی و انتقال از سرشاخهها ضرورت دارد. </strong>https://jise.scu.ac.ir/article_14375_3505fb26181835f005498402913db2e9.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Effect of Negative Slope, Bed Roughness and Positive Step on Velocity Profile and Pressure Oscillations of Hydraulic Jumpاثر شیب منفی، زبری بستر و پله انتهایی بر پروفیل سرعت و نوسانات فشار پرش هیدرولیکی1731881433010.22055/jise.2018.23313.1657FAناهیدپورعبداللهدکتری آبیاری و زهکشی، دانشگاه صنعتی اصفهانمنوچهرحیدرپوراستاد گروه مهندسی آب، دانشکده کشاورزی، دانشگاه صنعتی اصفهان.0000-0000-0000-0000جهانگیرعابدی کوپاییاستاد گروه مهندسی آب، دانشکده کشاورزی، دانشگاه صنعتی اصفهان.جهانشیرمحمدزاده هابیلیاستادیار گروه مهندسی آب، دانشکده کشاورزی، دانشگاه شیراز.Journal Article20170911The control of speed and pressure oscillations along the stream, as two critical parameters in designing hydraulic systems, is vital since they have to be set within an acceptable range in order to prevent damages to hydraulic structures. Ead and Rajaratnam (2002) studied the hydraulic jump characteristics on the corrugated bed and calculated the thickness of dimensionless boundary layer to be 0.45. Pourabdollah et al. (2015) investigated the effect of roughness and adverse slope of the bed on the velocity profile and determined the mean shear force coefficient to be 11.5 times more than that of the classical condition. Fiorotto and Rinaldo (1992) stated that in hydraulic jump the pressure is oscillating around the mean pressure value, which is almost equal to piezometric head at each point. Also Lopardo and Solari (1980) determined the pressure oscillations equal to 0.084 for hydraulic jump at downstream of valve. Accordingly, although various studies have been carried out on hydraulic jump characteristics under different conditions, the simultaneous effect of end positive step, bed roughness and adverse slope on hydraulic jump characteristics have not yet been explored. Therefore, the aim of this study was to investigate the velocity profiles, flow surface and pressure oscillations in hydraulic jump within the stilling basin at defined conditions.<strong>حوضچههای آرامش برای کنترل پرش هیدرولیکی تحت شرایط شیب معکوس و زبری بستر مورد توجه پژوهشگران قرار گرفته است. در این پژوهش اثر همزمان سه شیب منفی، سه قطر زبری و دو ارتفاع پله مثبت انتهایی بر پروفیل سرعت و نوسانات فشار در اعداد فرود 4 تا 10 بررسی شده است. براساس نتایج ضخامت لایه مرزی بی</strong><strong></strong><strong>بعد</strong><strong>71/0</strong><strong>محاسبه شد که در مقایسه</strong><strong>با بستر صاف قابل ملاحظه بود. همچنین تنش برشی</strong><strong>6/12</strong><strong>برابر شرایط</strong><strong>بستر</strong><strong>صاف بهدست آمد. نتایج نشان داد </strong><strong>سه عامل شیب منفی، زبری بستر و پله مثبت انتهایی باعث کاهش </strong><strong>انحراف معیار استاندارد نوسانات فشار </strong><strong>نسبت به حالت کلاسیک میشود. </strong><strong>بیشترین مقدار ضریب بدون بعد انحراف معیار استاندارد نوسانات فشار و ضریب بدون بعد نوسانات فشار بهترتیب برابر 027/0 و 275/0 محاسبه شد که در مقایسه با حالت کلاسیک بهترتیب 6/65 و 7/64 درصد کاهش داشته است. همچنین </strong><strong>حداقل ضریب کاویتاسیون در این مطالعه برابر 87/3 محاسبه گردید و </strong><strong>بنابراین</strong><strong>سازه</strong><strong>با</strong><strong>مشکل کاویتاسیون</strong><strong>مواجه</strong><strong>نخواهد بود.</strong>https://jise.scu.ac.ir/article_14330_93e19c6b511cd54c20980db2d603adb9.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Optimal Utilization of Water Resources in Real Time Based on NSGA-II Algorithms and Support Vector Machines (Case Study: Gavoshan Dam)بهره برداری بهینه منابع آب در زمان واقعی بر اساس الگوریتم NSGA-II و ماشین های بردار پشتیبان (مطالعه موردی: سد گاوشان)1892041433710.22055/jise.2018.23042.1639FAآرشآذریاستادیار گروه مهندسی آب دانشکده علوم و مهندسی کشاورزی، دانشگاه رازی.علیآرماناستادیار گروه مهندسی آب دانشکده علوم و مهندسی کشاورزی، دانشگاه رازی.Journal Article20170912Ample research has been done on optimization methods for the exploitation of reservoirs in the form of a specific optimization. In this type of studies, a certain series of flow is provided for the reservoir during the operation period and the release from the reservoir to downstream is optimized under such circumstances. They are certain drawbacks for these models. First, optimal solutions cannot be generalized for other possible inputs to the reservoir. Second, in the event of a change in the flow of input into the reservoirs, it is likely that the optimal solutions are not efficient and the operation of the system in the form of an optimization algorithm should be performed again. In such circumstances, one of the solutions is the use of intelligent methods such as support vector machines to apply the results of system optimization in real time. The main goal of this study is to integrate artificial intelligence methods such as support vector machine with NSGA-II optimization algorithm to convert it to real time. In this structure, contrary to the conventional design of the scheduling, in the event of a change in the flow of input, there is no need to perform re-optimization to understand the optimal coefficients. Instead, the extraction relationship of the support vector machine can be based on the input to the reservoir (at the beginning of the month), the volume of water storage in the tank (at the beginning of the month), reservoir storage changes and downstream needs in the current month to yield optimal release rates in real time.<strong>در این تحقیق از ترکیب الگوریتم چندهدفه </strong><strong>NSGA-II</strong><strong> و مدل شبیهساز </strong><strong>WEAp </strong><strong> برای استخراج سیاستهای بهینه بهرهبرداری از مخزن در قالب بهینهسازی معین استفاده شد. طوریکه در آن، هدف اول، حداکثر نمودن اطمینانپذیری تأمین نیازها در مقابل هدف دوم یعنی حداقل نمودن میزان تخطی ناشی از عدم تأمین نیازها و تخطی از ظرفیت مخزن در طول دوره بهرهبرداری قرار گرفت. اما جوابهای بهینه یعنی مقدار رهاسازی از مخزن قابل تعمیم برای سایر ورودیهای محتمل به مخزن نیستند. در صورت تغییر جریان ورودی به مخازن جوابهای بهینه بهدست آمده کارایی نداشته و باید بهرهبرداری از سیستم در قالب الگوریتم بهینهساز مجددا بهینه گردد. لذا برای حل این مشکل روش جدیدی بر اساس تلفیق روش ماشین بردار پشتیبان و الگوریتم </strong><strong>NSGA-II</strong><strong> برای بهرهبرداری بهینه از سیستم در زمان واقعی توسعه داده شد. نتایج نشان داد میانگین خطای قوانین بهینه مستخرج از ماشینهای بردار پشتیبان نسبت به خروجی الگوریتم </strong><strong>NSGA-II</strong><strong> در مرحله صحتسنجی کمتر از 10 درصد است که نشان دهنده کارایی این روش در پیشبینی الگوی بهینه منحنی فرمان سد در زمان واقعی است. در این ساختار میتوان بر اساس جریان ورودی به مخزن، حجم ذخیره آب در مخزن و تغییرات ذخیره مخزن (در ابتدای ماه) و نیازهای پاییندست در ماه حاضر، مقدار رهاسازی بهینه را در زمان واقعی بهدست آورد. روش مورد استفاده این قابلیت را داشته که با توجه به ورودیهای جدید جریان به سد، سریعا سیاستهای بهره برداری بهینه را به نحوی در اختیار قرار دهد که امکان مدیریت بهینه سیستم در زمان واقعی فراهم گردد.</strong>https://jise.scu.ac.ir/article_14337_a912eb2117c2faa5d8d583a409b57a1e.pdfدانشگاه شهید چمران اهوازعلوم و مهندسی آبیاری2588-595243120200320Combined use of Processed Images by Wavelet and Neural Fuzzy İnference System to Estimate EC Parameter of the Karun Riverاستفاده تلفیقی از تصاویر پردازش شده با موجک و سیستم استنتاج فازی عصبی جهت برآورد پارامتر EC رودخانه کارون2052191535010.22055/jise.2020.31187.1879FAامیرپورحقیدکتری هیدرولوژی و منابع آب ، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهوازعلی محمدآخوندعلیاستاد گروه هیدرولوژی و منابع آب ، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز.0000-0003-4506-692Xحیدرزارعیدانشیار گروه هیدرولوژی و منابع آب ، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز.0009-0008-8384-292XJournal Article20180404Nowadays, monitoring of river quality information is one of the most important issues in water resources engineering because of the direct relationship of water quality with environmental health and quality of life. Today, traditional methods of river monitoring are receiving less attention due to the fact that they are costly and time-consuming for the researcher. Instead, the recent, low-cost methods are favorable to many researchers in this filed. Different methods have always been considered for river monitoring, but the application of spectral indicators and remote sensing technologies to control and monitor the water quality of rivers and reservoirs is very cost-effective and could be a good alternative to traditional methods. Since it is time-saving and less costly, it would be a good indicator for the whole region and a good alternative to manual methods (Bonansea et al., 2015). <br />Although satellite imagery has been widely used in estimating water quality indices (Onderka and Pekárová, 2008), the complexity of hydrological systems and the presence of noise in images can increase the calculation error. Wavelet transform and intelligent models are among the most efficient methods that can significantly increase computation accuracy by filtering and noise reduction. Good research has been done on the use of wavelet transform in image processing (Graps, 1995) and fuzzy inference system to estimate water quality parameters (Solgi et al., 2017). In this study, using wavelet transform, Landsat 8 images were processed, then the processed images were considered as inputs of ANFIS model.<strong>امروزه پایش و پردازش اطلاعات کیفی رودخانه با استفاده از روشهای آزمایشگاهی با صرف وقت و هزینه زیاد همراه است. از این رو استفاده از روشهای نوین برای کاهش این هزینهها میتواند کمک شایانی در مدیریت کیفی رودخانهها داشته باشد. استفاده ترکیبی از مدلهای هوش مصنوعی و سنجش از دور از جمله روشهای کارآمد برای رسیدن به این هدف است. در این تحقیق بهمنظور برآورد </strong><strong>EC</strong><strong> رودخانه کارون با استفاده از مدل سیستم استنتاج فازی عصبی </strong><strong>(ANFIS)</strong><strong>، در زمان گذر ماهواره لندست 8، نمونهبرداری دستی از 66 نقطه از سطح رودخانه برای مدت 12 ماه (دی ماه 1394 تا آذر ماه 1395) انجام شد. هشت ماه اول نمونهبرداری برای واسنجی و چهار ماه انتهایی برای صحتسنجی مورد استفاده قرار گرفت. مقادیر بازتابی تصاویر لندست 8 بهعنوان ورودی و </strong><strong>EC</strong><strong> نقاط برداشت شده به عنوان خروجی مدل </strong><strong>ANFIS</strong><strong> در نظر گرفته شد. در ادامه بهمنظور افزایش دقت مدل </strong><strong>ANFIS</strong><strong> و کاهش خطا تصاویر از روش تبدیل موجک و مکانمند کردن دادهها استفاده گردید. نتایج نشان داد که استفاده ترکیبی از تصاویر ماهوارهای و مدل </strong><strong>ANFIS</strong><strong> از </strong><strong> </strong><strong>عملکرد نسبتاً خوبی برخوردار است و با روش مکانمند کردن یعنی اضافه کردن خصوصیات مکانی نقاط برداشت بهعنوان ورودی مدل </strong><strong>ANFIS</strong><strong> دقت کار تا مقدار قابل توجهی افزایش مییابد. همچنین نتایج نشان داد که استفاده از تبدیل موجک برای کاهش نویز تصاویر و بهبود عملکرد مدل میتواند علاوه بر کاهش خطا، ضریب تعیین را از 85 درصد تا بالای 89 درصد افزایش دهد.</strong>https://jise.scu.ac.ir/article_15350_df81e927bc6d2548dd44f22cb81789e7.pdf